SS51T

SS51T Datasheet


SS5 Series

Part Datasheet
SS51T SS51T SS51T (pdf)
PDF Datasheet Preview
Interactive Catalog Replaces Catalog Pages

Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes it easier to find product information. It includes more installation, application, and technical information than ever before.

Click this icon to try the new Interactive Catalog.

Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032

Hall Effect Products Surface Mount Sensors

SS5 Series

FEATURES/BENEFITS
• Wide temperature and
voltage ranges for design flexibility and harsh automotive environments.
• Temperature compensated for consistent operation with low-cost magnets SS500 .
• SS5 Package is resistant to thermal and mechanical stress.
• SS5 profile is lower than other SOT-89 packages. This allows the customer to reduce the total gap.
• Industry standard "gull-wing" design. Less susceptibility to "solder bridging". Allows increased circuit board density.
• Bipolar, unipolar and latching magnetics.
• Low Gauss versions available for high accuracy or wide gap applications.
• SS5 package allows 4-pin package designs

TYPICAL APPLICATIONS
• Brushless DC motors
• Digital current sensor
• Anti-skid braking sensor
• Piston detection in hydraulic
cylinder
• Valve position sensing
• Cam, lever, shaft position
sensing
• Tachometer, counter pickup
• Push-button sensor
• Disk speed, tape rotation,
flow rate sensing
• Speed sensing - rate, under,
over speed
• Remote reading sensor
• Magnetic card reader

SS5 Series Hall effect position sensors are operated by the magnetic field from a permanent magnet or electromagnet. The small SOT89 style package surface mounts on PC boards and flexible circuits. The SS5 uses a industry standard "gull-wing" design which makes it less susceptible to "solder bridging" and allows increased circuit board density. The SS5 series package can accommodate larger IC’s than SS1 and allows for fourpin designs

The integrated circuits are designed to provide predictable performance over the full temperature range of -40 to +150°C. Bipolar, unipolar and latching magnetics are available. The SS5 has the same footprint and pinout as the industry standard SOT-89. It will replace Honeywell SS1 Series and any equivalent SOT-89 sensors from other suppliers with minimum or no design changes.

On-board regulation provides extremely stable operation over the full supply voltage range of to 24 VDC SS51T or to 30 VDC SS500 . Current consumption is a low 10 mA maximum at 40°C and is typically 7mA or less at room temperature and above. SS5 sensors are capable of continuous 20 mA sinking output, and can withstand temporary current as high as 20 mA maximum SS51T or 50 mA maximum SS500 . They can use existing power supply sources in most applications, and can be directly interfaced with many electronic components without buffering or compensation circuitry.

SS5 Series sensors are supplied on tape and reel for high-volume, automated pick and place equipment. Each reel contains 1,000 sensors.

MICRO SWITCH supplies bar and ring magnets for operating Hall effect sensors. Bar magnets can operate any Hall effect sensor. Ring magnets are magnetized on the outside diameter with alternating North and South poles. They are particularly useful with bipolar sensors and rpm measurement.

HONEYWELL Sensing and Control

Hall Effect Products Surface Mount Sensors

SS5 Series

WIRING DIAGRAMS

ABSOLUTE MAXIMUM RATINGS

Catalog Listing Supply Voltage

SS51T -28 to +28 VDC

SS500 -1 to +30 VDC

Voltage externally applied to output
+28 VDC max. OFF condition only
+30 VDC max. OFF condition only

VDC min. OFF or ON condition

Output ON Current 20 mA max.
50 mA max.

Temperature Limits

Operating -40 to +150°C -40 to +302°F
-50 to +160°C -46 to +320°F

Storage -40 to +150°C -40 to +302°F
-65 to +160°C -54 to +320°F

Magnetic Flux

No limit. Circuit cannot be damaged by magnetic overdrive.

No limit. Circuit cannot be damaged by magnetic overdrive.

Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability.
More datasheets: IRFS540A | SEP8507-001 | SB80C186XL12 | MAX17039GTN+T | MAX17039GTN+ | DCM8W8SNA197 | CA3102R16S-8SF183A176 | 57974-050 | 638118875 | DCM13W6PNMBK52


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SS51T Datasheet file may be downloaded here without warranties.

Datasheet ID: SS51T 636540