FLIR ONE - ANDROID

FLIR ONE - ANDROID Datasheet

FLIR ONE QUICK START

Part	Datasheet
FLIR ONE - ANDROID	FLIR ONE - ANDROID (pdf)

PDF Datasheet Preview
USER GUIDE Second Generation For Android FLIR ONE QUICK START STEP 1 Charge the FLIR ONE with the included USB power cable connected to a 1A power source. The Charge Indicator LED next to the USB connection blinks on and off while the FLIR is charging and stays on continuously when it is fully charged. Once the FLIR ONE is charged, attach it to the phone. Android Spacer For users that do not have a case on their Android, a provided spacer can be attached to the FLIR ONE to create a snug fit and finish. See page 9 for more information. STEP 2 Download and install the FLIR app, which is available on Google PlayTM. When you start the FLIR ONE app, a short tutorial will be displayed to help you get started with the FLIR ONE. STEP 3 Press the power button on the side of the FLIR ONE to turn it on. Initially, the indicator light will turn orange, and then it will flash green when the device is ready. USER GUIDE 2 STEP 4 Once an image is displayed, tap the color palette icon in the lower left to change how the image is displayed. Select one of the displayed color or grayscale palettes. APP OVERVIEW Battery Control Panel Spot Meter Shutter/ Calibration The camera is in photo mode as indicated just below the image. Tap the camera icon to capture an image. At the bottom of the display, select the Mode button a circle with “Mode” to bring up a screen that lets you select another mode Video, Pano, or Time-Lapse . These modes are described in a later section of the manual. The image that displays in the app is a combination of a thermal image and a daylight image through a unique process called MSX. The FLIR ONE thermal camera can produce an image even in total darkness. When visible light is available, the FLIR ONE daylight camera Color Palette Camera Button Imag is used to enhance the detail of the FLIR ONE thermal camera. Mode Button FLIR Library For close-up scenes, it is possible to optimize the way the daylight and thermal images are blended. In the Control Panel, you can enable/disable this mode by clicking on the Close-Up Mode button, represented by a flower. When Close-Up Mode is enabled, you can control the image optimization the alignment of the thermal and visible image by adjusting the Optimization slider. Optimizing the image is described in more detail on page PALETTE SCREEN Refer to the following sections in this guide for additional information on using the FLIR More detailed information is also available in the Help & Support feature within the FLIR app. The FLIR ONE Reference Manual is available from the FLIR web site: WARNING The FLIR ONE is not waterproof. Use caution if the FLIR ONE is used to observe very hot objects like fire or molten metal. USER GUIDE 3 FLIR ONE USER GUIDE The FLIR ONE allows you to see the world in a whole new way, with a unique blend of thermal and visible imaging. This user guide provides brief information on how to use the FLIR ONE. Additional information is available directly from the FLIR ONE app in the Help section of the Settings Menu. Charge Indicator LED Micro USB Power Thermal Camera Visible Camera Phone Connect or Micro USB Off/On Switch and Power Indicator CHARGING THE FLIR ONE Plug the Micro USB end of the power cable into the FLIR ONE and plug the other end into a 1A power source. The Charge Indicator LED will blink while the device is charging. The FLIR ONE requires less than one hour for a full charge with a 1A source . When the device is fully charged, the Charge Indicator LED will be on continuously. USER GUIDE 4 FLIR ONE APP The latest version of the FLIR ONE app is available on the Google Play Store. Download and install the app, then start it. If the FLIR ONE is turned off, the app will prompt you to attach your FLIR ONE camera and turn it on. APP OVERVIEW Battery

PDF Datasheet Preview

USER GUIDE

Second Generation

For Android

FLIR ONE QUICK START

STEP 1 Charge the FLIR ONE with the included USB power cable connected to a 1A power source. The Charge Indicator LED next to the USB connection blinks on and off while the FLIR is charging and stays on continuously when it is fully charged. Once the FLIR ONE is charged, attach it to the phone.

Android Spacer For users that do not have a case on their Android, a provided spacer can be attached to the FLIR ONE to create a snug fit and finish. See page 9 for more information.

STEP 2 Download and install the FLIR app, which is available on Google PlayTM. When you start the FLIR ONE app, a short tutorial will be displayed to help you get started with the FLIR ONE.

STEP 3 Press the power button on the side of the FLIR ONE to turn it on. Initially, the indicator light will turn orange, and then it will flash green when the device is ready.

USER GUIDE 2

STEP 4 Once an image is displayed, tap the color palette icon in the lower left to change how the image is displayed. Select one of the displayed color or grayscale palettes.

APP OVERVIEW

Battery

Control Panel Spot Meter

Shutter/ Calibration

The camera is in photo mode as indicated just below the image. Tap the camera icon to capture an image. At the bottom of the display, select the Mode button a circle with “Mode” to bring up a screen that lets you select another mode Video, Pano, or Time-Lapse . These modes are described in a later section of the manual.

The image that displays in the app is a combination of a thermal
image and a daylight image through a unique process called MSX.

The FLIR ONE thermal camera can produce an image even in total
darkness. When visible light is available, the FLIR ONE daylight camera Color Palette Camera Button Imag
is used to enhance the detail of the FLIR ONE thermal camera.

Mode Button

FLIR Library

For close-up scenes, it is possible to optimize the way the daylight and thermal images are blended. In the Control Panel, you can enable/disable this mode by clicking on the Close-Up Mode button, represented by a flower. When Close-Up Mode is enabled, you can control the image optimization the alignment of the thermal and visible image by adjusting the Optimization slider. Optimizing the image is described in more detail on page

PALETTE SCREEN

Refer to the following sections in this guide for additional information on using the FLIR

More detailed information is also available in the Help & Support feature within the FLIR app. The FLIR ONE Reference Manual is available from the FLIR web site:

WARNING

The FLIR ONE is not waterproof.

Use caution if the FLIR ONE is
used to observe very hot objects
like fire or molten metal.

USER GUIDE 3

FLIR ONE USER GUIDE

The FLIR ONE allows you to see the world in a whole new way, with a unique blend of thermal and visible imaging. This user guide provides brief information on how to use the FLIR ONE. Additional information is available directly from the FLIR ONE app in the Help section of the Settings Menu.

Charge Indicator LED Micro USB Power Thermal Camera Visible Camera Phone Connect or Micro USB

Off/On Switch and Power Indicator

CHARGING THE FLIR ONE Plug the Micro USB end of the power cable into the FLIR ONE and plug the other end into a 1A power source. The Charge Indicator LED will blink while the device is charging. The FLIR ONE requires less than one hour for a full charge with a 1A source . When the device is fully charged, the Charge Indicator LED will be on continuously.

USER GUIDE 4

FLIR ONE APP The latest version of the FLIR ONE app is available on the Google Play Store. Download and install the app, then start it. If the FLIR ONE is turned off, the app will prompt you to attach your FLIR ONE camera and turn it on.

APP OVERVIEW

Battery

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FLIRONE-ANDROID Datasheet file may be downloaded here without warranties.

Datasheet ID: FLIRONE-ANDROID 635325