QVE00120

QVE00120 Datasheet

QVE00120

Part	Datasheet
QVE00120	QVE00120 (pdf)

PDF Datasheet Preview
PACKAGE DIMENSIONS QVE00120 OPTICAL INTERRUPTER SWITCH OPTICAL C.L. 2X TYP MIN 4X PINS 4x SQ. TYP TYP PIN #1 ANODE KNOB OPTICAL C.L. PIN #3 VCC PIN #2 CATHODE PIN #4 VOUT PIN #5 GND Dimensions for all drawings are in inches millimeters . Tolerance of ± on all non-nominal dimensions unless otherwise specified. • No contact switching • mm wide slot • mm aperture width • Opaque black plastic housing • Output configuration Buffer open-collector • TTL/CMOS compatible output • Locating knobs on housing base for accurate mounting NOTES Applies to Max Ratings and Characteristics Tables. Derate power dissipation linearly mW/°C above 25°C. Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as cleaning agents. Soldering iron 1/16” 1.6mm from housing. As long as leads are not under any stress or spring tension. ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified Parameter Rating Operating Temperature Storage Temperature Lead Temperature Solder Iron 3,4,5,6 Lead Temperature Solder Flow 3,4,5,6 EMITTER TOPR TSTG TSOL-I TSOL-F -40 to +85 -40 to +85 240 for 5 sec 260 for 10 sec Output Current Supply Voltage Output Voltage Power Dissipation 2 1 of 5 Units °C °C °C °C mA V mW mA V mW 100029B QVE00120 OPTICAL INTERRUPTER SWITCH ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C TEST CONDITIONS IF = 20 mA VR = 5 V IF = 15 mA or 0 mA, VCC = 16 V IF = 15 mA, VCC = 5 V, RL = 360 ! IF = 0 mA, VCC = 5 V, VOH = 30 V VCC = 5 V, RL = 360 ! VCC = 5 V, RL = 360 ! VCC = 5 V, RL = 360 ! VCC = 5 V, RL = 360 ! SYMBOL VCC

PDF Datasheet Preview

PACKAGE DIMENSIONS

QVE00120

OPTICAL INTERRUPTER SWITCH

OPTICAL C.L.
2X TYP

MIN 4X

PINS 4x

SQ. TYP

TYP PIN #1 ANODE

KNOB

OPTICAL C.L.

PIN #3 VCC

PIN #2 CATHODE

PIN #4 VOUT

PIN #5 GND

Dimensions for all drawings are in inches millimeters . Tolerance of ± on all non-nominal dimensions
unless otherwise specified.
• No contact switching
• mm wide slot
• mm aperture width
• Opaque black plastic housing
• Output configuration Buffer open-collector
• TTL/CMOS compatible output
• Locating knobs on housing base for accurate mounting

NOTES Applies to Max Ratings and Characteristics Tables.

Derate power dissipation linearly mW/°C above 25°C. Derate power dissipation linearly mW/°C above 25°C. RMA flux is recommended. Methanol or isopropyl alcohols are recommended as
cleaning agents. Soldering iron 1/16” 1.6mm from housing. As long as leads are not under any stress or spring tension.

ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise specified

Parameter

Rating

Operating Temperature Storage Temperature Lead Temperature Solder Iron 3,4,5,6 Lead Temperature Solder Flow 3,4,5,6 EMITTER

TOPR TSTG TSOL-I TSOL-F
-40 to +85 -40 to +85 240 for 5 sec 260 for 10 sec

Output Current Supply Voltage Output Voltage Power Dissipation 2
1 of 5

Units °C °C °C °C
mA V mW
mA V mW
100029B

QVE00120

OPTICAL INTERRUPTER SWITCH

ELECTRICAL / OPTICAL CHARACTERISTICS TA =25°C

TEST CONDITIONS

IF = 20 mA VR = 5 V

IF = 15 mA or 0 mA, VCC = 16 V IF = 15 mA, VCC = 5 V, RL = 360 ! IF = 0 mA, VCC = 5 V, VOH = 30 V VCC = 5 V, RL = 360 ! VCC = 5 V, RL = 360 !

VCC = 5 V, RL = 360 ! VCC = 5 V, RL = 360 !

SYMBOL VCC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived QVE00120 Datasheet file may be downloaded here without warranties.

Datasheet ID: QVE00120 634550