FTLX8571D3BCV

FTLX8571D3BCV Datasheet

FTLX8571D3BCV

Part	Datasheet
FTLX8571D3BCV	FTLX8571D3BCV (pdf)

PDF Datasheet Preview
Product Specification RoHS-6 Compliant 1G/10G 850nm Multimode Datacom SFP+ Transceiver FTLX8571D3BCV PRODUCT FEATURES • Hot-pluggable SFP+ footprint • Supports rate selectable Gb/s or to Gb/s bit rates • Power dissipation < 1W • RoHS-6 compliant lead-free • Commercial temperature range 0°C to 70°C • Single 3.3Vpower supply • Maximum link length of 300m on 2000 MHZ-km MMF • Uncooled 850nm VCSEL laser • Receiver limiting electrical interface • Duplex LC connector • Built-in digital diagnostic functions APPLICATIONS • 1000BASE-SX 1G Ethernet • 10GBASE-SR/SW 10G Ethernet Finisar’s FTLX8571D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-84311, IEEE 10GBASE-SR/SW2 and 1000BASE-SX3. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF84724. The FTLX8571D3BCV is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperability with an SFP+ limiting module. This product is for applications specifically designed for 10G SFP+ ports and 1G/10G SFP+ ports and not native 1G SFP ports. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC5, and Finisar Application Note AN-20386. PRODUCT SELECTION FTLX8571D3BCV Finisar Corporation 2015 FTLX8571D3BCV Product Specification I. Pin Descriptions Name/Description Ref. VEET Transmitter Ground Common with Receiver Ground TFAULT Transmitter Fault. TDIS Transmitter Disable. Laser output disabled on high or open. 2-wire Serial Interface Data Line 2-wire Serial Interface Clock Line 6 MOD_ABS Module Absent. Grounded within the module RS0 for Rate Select Open or Low = Module supports Gb/s High = Module supports Gb/s to Gb/s RX_LOS Loss of Signal indication. Logic 0 indicates normal operation. No connection required VEER Receiver Ground Common with Transmitter Ground VEER Receiver Ground Common with Transmitter Ground Receiver Inverted DATA out. AC Coupled Receiver Non-inverted DATA out. AC Coupled

PDF Datasheet Preview

Product Specification

RoHS-6 Compliant 1G/10G 850nm Multimode Datacom SFP+ Transceiver

FTLX8571D3BCV

PRODUCT FEATURES
• Hot-pluggable SFP+ footprint
• Supports rate selectable Gb/s or to Gb/s bit rates
• Power dissipation < 1W
• RoHS-6 compliant lead-free
• Commercial temperature range 0°C to 70°C
• Single 3.3Vpower supply
• Maximum link length of 300m on 2000 MHZ-km MMF
• Uncooled 850nm VCSEL laser
• Receiver limiting electrical interface
• Duplex LC connector
• Built-in digital diagnostic functions

APPLICATIONS
• 1000BASE-SX 1G Ethernet
• 10GBASE-SR/SW 10G Ethernet

Finisar’s FTLX8571D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-84311, IEEE 10GBASE-SR/SW2 and 1000BASE-SX3. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF84724. The FTLX8571D3BCV is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperability with an SFP+ limiting module. This product is for applications specifically designed for 10G SFP+ ports and 1G/10G SFP+ ports and not native 1G SFP ports. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC5, and Finisar Application Note AN-20386.

PRODUCT SELECTION

FTLX8571D3BCV

Finisar Corporation 2015

FTLX8571D3BCV Product Specification

I. Pin Descriptions

Name/Description

Ref.

VEET

Transmitter Ground Common with Receiver Ground

TFAULT

Transmitter Fault.

TDIS

Transmitter Disable. Laser output disabled on high or open.
2-wire Serial Interface Data Line
2-wire Serial Interface Clock Line
6 MOD_ABS Module Absent. Grounded within the module

RS0 for Rate Select Open or Low = Module supports Gb/s High = Module supports Gb/s to Gb/s

RX_LOS Loss of Signal indication. Logic 0 indicates normal operation.

No connection required

VEER

Receiver Ground Common with Transmitter Ground

VEER

Receiver Ground Common with Transmitter Ground

Receiver Inverted DATA out. AC Coupled

Receiver Non-inverted DATA out. AC Coupled

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FTLX8571D3BCV Datasheet file may be downloaded here without warranties.

Datasheet ID: FTLX8571D3BCV 635232