B59192A0120B020

B59192A0120B020 Datasheet

B59506A0120A020

Part	Datasheet
B59192A0120B020	B59192A0120B020 (pdf)

PDF Datasheet Preview
PTC thermistors for motor starting Metallized disks, standard sizes Series/Type Date: February 2012 EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Motor starting Standard sizes Applications Time delay in turning off the auxiliary winding of single-phase AC motors e.g. refrigerator compressors Type A314 suitable for air conditioning systems Dimensional drawing Features Metallization CrNi sputtered + Ag screen-printed , except A314 screen-printed Ag Excellent long-term reliability Suitable for clamp contacting UL approval to UL 1434 file number E69802 VDE approval license number 87406 E , except A524 and A314 CSA approval for A506 certificate No. 1109600 RoHS-compatible Options Other dimensions and ratings on request Delivery mode Bulk Dimensions mm Type VR = 120 VRMS A506 VR = 230 VRMS A192 A196 A197 Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 9 Motor starting Standard sizes A314 A501 A524 A544 General technical data Switching cycles Operating V = Top +5/+80 °C temperature 0 range Operating V = Top +5/+80 °C temperature Vmax range Electrical specifications and ordering codes Type Imax Vmax Tref typ. VBD2 V RR VPTC V Ordering code VR = 120 VRMS A506 12 180 VR = 230 VRMS > 360 ±20% B59506A0120A020 A501 6 355 135 > 700 33 ±20% A524 7 300 135 > 600 22 ±20% A544 8 320 120 > 650 20 ±20% A192 8 325 120 > 650 22 ±20% A196 8 350 120 > 700 15 ±30% A197 9 350 120 > 700 33 ±30% A314 9 400 120 > 800 38 ±30% Note Type A314 suitable for air conditioning systems. B59501A0135A020 B59524A0135A020 B59544A0120A020 B59192A0120B020 B59196A0120A020 B59197A0120B020 B59314A0120B010 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 9 Motor starting Standard sizes 1 Imax 2 points. Measured at V = Vmax and I = PTC clamped between Reliability data Test1 Electrical endurance, cycling Electrical endurance, constant Damp heat Standard IEC 60738-1 IEC 60738-1 IEC 60738-1 Rapid change of temperature IEC 60738-1 Climatic sequence IEC 60738-1 Test conditions Room temperature, Vmax Imax Number of cycles 500 000 < 25% Storage at Vmax /Top,max Vmax Test duration 1000 h < 25% Temperature of air 40 °C Relative humidity of air 93% Duration 56 days Test according to IEC 60068-2-78 < 20% T1 = Top,min 0 V , T2 = Top,max 0 V Number of cycles 5 Test duration 30 min Test according to IEC 60068-2-14, test Na < 20% Dry heat T = Top,max 0 V Test duration 16 h Damp heat first cycle Cold T = Top,min 0 V Test duration 2 h Damp heat 5 cycles Tests performed according to IEC 60068-2-30 < 25% Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 9 1 All tests with PTC disk mounted in EPCOS housing. Surface-mount devices * To be replaced by a number in ordering codes, type designations etc. + To be replaced by a letter All dimensions are given in mm. The commas used in numerical values denote decimal points. Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 9 Important notes The following applies to all products named in this publication Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or lifesaving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association ZVEI . Page 10 of 9 The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at Page 11 of 9

PDF Datasheet Preview

PTC thermistors for motor starting

Metallized disks, standard sizes

Series/Type Date:

February 2012

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Motor starting

Standard sizes

Applications Time delay in turning off the auxiliary winding
of single-phase AC motors e.g. refrigerator compressors Type A314 suitable for air conditioning systems

Dimensional drawing

Features Metallization CrNi sputtered + Ag screen-printed , except A314 screen-printed Ag Excellent long-term reliability Suitable for clamp contacting UL approval to UL 1434 file number E69802 VDE approval license number 87406 E , except A524 and A314 CSA approval for A506 certificate No. 1109600 RoHS-compatible

Options Other dimensions and ratings on request

Delivery mode Bulk

Dimensions mm

Type VR = 120 VRMS A506

VR = 230 VRMS A192

A196

A197

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 9

Motor starting

Standard sizes

A314

A501 A524 A544

General technical data

Switching cycles

Operating V = Top +5/+80 °C temperature 0
range

Operating V = Top +5/+80 °C temperature Vmax
range
Electrical specifications and ordering codes

Type Imax Vmax Tref
typ.

VBD2 V

RR VPTC V
Ordering code

VR = 120 VRMS

A506 12 180 VR = 230 VRMS
> 360
±20%

B59506A0120A020

A501 6 355 135 > 700 33 ±20% A524 7 300 135 > 600 22 ±20% A544 8 320 120 > 650 20 ±20% A192 8 325 120 > 650 22 ±20% A196 8 350 120 > 700 15 ±30% A197 9 350 120 > 700 33 ±30% A314 9 400 120 > 800 38 ±30% Note Type A314 suitable for air conditioning systems.

B59501A0135A020 B59524A0135A020 B59544A0120A020 B59192A0120B020 B59196A0120A020 B59197A0120B020 B59314A0120B010

Please read Cautions and warnings and Important notes at the end of this document.

Page 3 of 9

Motor starting

Standard sizes
1 Imax 2 points.

Measured at V = Vmax and I = PTC clamped between

Reliability data

Test1

Electrical endurance, cycling

Electrical endurance, constant

Damp heat

Standard IEC 60738-1

IEC 60738-1

IEC 60738-1

Rapid change of temperature

IEC 60738-1

Climatic sequence

IEC 60738-1

Test conditions

Room temperature, Vmax Imax Number of cycles 500 000
< 25%

Storage at Vmax /Top,max Vmax Test duration 1000 h
< 25%

Temperature of air 40 °C Relative humidity of air 93% Duration 56 days Test according to IEC 60068-2-78
< 20%

T1 = Top,min 0 V , T2 = Top,max 0 V Number of cycles 5 Test duration 30 min Test according to IEC 60068-2-14, test Na
< 20%

Dry heat T = Top,max 0 V Test duration 16 h Damp heat first cycle

Cold T = Top,min 0 V Test duration 2 h Damp heat 5 cycles Tests performed according to IEC 60068-2-30
< 25%

Please read Cautions and warnings and Important notes at the end of this document.

Page 4 of 9
1 All tests with PTC disk mounted in EPCOS housing.
Surface-mount devices * To be replaced by a number in ordering codes, type designations etc. + To be replaced by a letter

All dimensions are given in mm. The commas used in numerical values denote decimal points.

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 9

Important notes

The following applies to all products named in this publication Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health e.g. in accident prevention or lifesaving systems , it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer e.g. installation of protective circuitry or redundancy that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions e.g. because they are classed as hazardous . Useful information on this will be found in our Material Data Sheets on the Internet Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association ZVEI .

Page 10 of 9

The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at

Page 11 of 9

More datasheets: M3249 SL002 | SEN0240 | 13902 | 100395QC | 100395QCX | AS3710-BQFP-00 | AS3710-BQFR-FF | AS3710-BQFP-01 | 825600T00000 | B65803J0000R608

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B59192A0120B020 Datasheet file may be downloaded here without warranties.

Datasheet ID: B59192A0120B020 511819