100395QCX

100395QCX Datasheet

100395 Low Power 9-Bit ECL-to-TTL Translator with Registers

Part	Datasheet
100395QCX	100395QCX (pdf)

Related Parts	Information
100395QC	100395QC

PDF Datasheet Preview
100395 Low Power 9-Bit ECL-to-TTL Translator with Registers 100395 Low Power 9-Bit ECL-to-TTL Translator with Registers The 100395 is a 9-bit translator for converting F100K logic levels to TTL logic levels. A HIGH on the output enable OE holds the TTL outputs in a high impedance state. Two separate clock inputs are available for multiplexing and system level testing. The 100395 is designed with TTL 64 mA outputs for bus driving capability. All inputs have 50 pull down resistors. When the inputs are either unconnected or at the same potential, the outputs will go LOW. s 64 mA IOL drive capability s 2000V ESD protection s −4.2V to −5.7V operating range s Registered outputs s TTL outputs Ordering Code: Order Number Package Number Package Description 100395QC V28A 28-Lead Plastic Lead Chip Carrier PLCC , JEDEC MO-047, Square Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram Pin Descriptions Pin Names OE CP1, CP2 Description Data Inputs ECL Data Outputs TTL Output Enable ECL Clock Inputs ECL Truth Table Inputs Outputs H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care OE DN Z = High Impedance NC = No Change 1999 Fairchild Semiconductor Corporation DS010651 100395 Logic Diagram 100395 Absolute Maximum Ratings Note 1 Storage Temperature TSTG Maximum Junction Temperature TJ Case Temperature under Bias TC VEE Pin Potential to Ground Pin VTTL Pin Potential to Ground Pin ECL Input Voltage DC TTL Input Voltage Output Current DC Output HIGH ESD Note 2 −65°C to +150°C +150°C 0°C to +85°C −7.0V to +0.5V −0.5V to +6.0V VEE to +0.5V −0.5V to +7.0V +130 mA 2000V Recommended Operating Conditions Case Temperature TC Supply Voltage 0°C to +85°C −5.7V to −4.2V VTTL +4.5V to +5.5V Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2 ESD testing conforms to MIL-STD-883, Method Commercial Version DC Electrical Characteristics Note 3 VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = 0°C to +85°C Parameter Units Conditions Output HIGH Voltage IOH = −15 mA VIN = VIH Max

PDF Datasheet Preview

100395 Low Power 9-Bit ECL-to-TTL Translator with Registers
100395 Low Power 9-Bit ECL-to-TTL Translator with Registers

The 100395 is a 9-bit translator for converting F100K logic levels to TTL logic levels. A HIGH on the output enable OE holds the TTL outputs in a high impedance state. Two separate clock inputs are available for multiplexing and system level testing.

The 100395 is designed with TTL 64 mA outputs for bus driving capability. All inputs have 50 pull down resistors. When the inputs are either unconnected or at the same potential, the outputs will go LOW.
s 64 mA IOL drive capability s 2000V ESD protection s −4.2V to −5.7V operating range s Registered outputs s TTL outputs
Ordering Code:

Order Number Package Number

Package Description
100395QC

V28A
28-Lead Plastic Lead Chip Carrier PLCC , JEDEC MO-047, Square
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Logic Symbol

Connection Diagram

Pin Descriptions

Pin Names OE CP1, CP2

Description Data Inputs ECL Data Outputs TTL Output Enable ECL Clock Inputs ECL

Truth Table

Inputs

Outputs

H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care

OE DN

Z = High Impedance NC = No Change
1999 Fairchild Semiconductor Corporation DS010651
100395

Logic Diagram
100395

Absolute Maximum Ratings Note 1

Storage Temperature TSTG Maximum Junction Temperature TJ Case Temperature under Bias TC VEE Pin Potential to Ground Pin VTTL Pin Potential to Ground Pin ECL Input Voltage DC TTL Input Voltage Output Current

DC Output HIGH ESD Note 2
−65°C to +150°C +150°C
0°C to +85°C −7.0V to +0.5V −0.5V to +6.0V

VEE to +0.5V −0.5V to +7.0V
+130 mA 2000V

Recommended Operating Conditions

Case Temperature TC Supply Voltage
0°C to +85°C
−5.7V to −4.2V

VTTL
+4.5V to +5.5V

Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical

Characteristics tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Note 2 ESD testing conforms to MIL-STD-883, Method

Commercial Version

DC Electrical Characteristics Note 3

VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = 0°C to +85°C

Parameter

Units

Conditions

Output HIGH Voltage

IOH = −15 mA

VIN = VIH Max

More datasheets: SRAH-05C2500 | MB1112H-TR | FQA13N50C | ADM1028ARQ | M3249 SL005 | M3249 SL001 | M3249 SL002 | SEN0240 | 13902 | 100395QC

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 100395QCX Datasheet file may be downloaded here without warranties.

Datasheet ID: 100395QCX 512972