AS3710-BQFP-01

AS3710-BQFP-01 Datasheet

AS3710

Part	Datasheet
AS3710-BQFP-01	AS3710-BQFP-01 (pdf)

Related Parts	Information
AS3710-BQFP-00	AS3710-BQFP-00
AS3710-BQFR-FF	AS3710-BQFR-FF

PDF Datasheet Preview
Datasheet AS3710 Triple Buck High Current PMIC with Charger 1 General Description The AS3710 is a compact System PMU with integrated battery charger and back light driver. The device offers advanced power management functions. All necessary ICs and peripherals in a battery powered mobile device are supplied by the AS3710. It features 3 DCDC buck converters as well as 8 low noise LDOs. The different regulated supply voltages are programmable via the serial control interface. 4MHz operation with 1uH coils are reducing cost and PCB space. The three step-up converter generate voltages for e.g.the backlight, classD amplifier, USB host support or LCD display supply. Both constant voltage for e.g. OLED supply as well as constant current white LED backlight operations with three current sinks are possible. An internal voltage protection is limiting the output voltage in the case of external component failures. AS3710 contains a linear or switching mode Li-Ion battery charger with constant current and constant voltage. The maximum charging current is 1.5A. An integrated battery switch and an optional external switch are separating the battery during charging or whenever an external power supply is present. With this switch it is also possible to operate with no or deeply discharged batteries. A programmable current limit 100mA - 2.5A can be used to control the maximum current used from a USB supply or charger input. Additional features are a 30V OV protection and battery temperature supervision. The single supply voltage may vary from 2.7V to 5.5V. 2 Key Features Voltage Generation 3 DCDC step down regulators 2-4MHz - DVM 0.6V-3.3V;1x 1.2-1.5A, 2x 0.7-1A - 60µA quiescent current - 2A with combined DCDC 2 & 3 2 analog low noise LDOs, 6 digital LDOs - 2x 1.2-3-3V, 6x 0.9-3.3V 150-300mA - 30µA quiescent current low power mode 1 ultra low power always on LDO 2.5V, 10mA Power supply supervision 4sec and 8sec emergency shut-down Stand-by function with voltage selection HV Backlight Driver 3x step up with external transistor - e.g. Voltage control mode and over-voltage protection 3 programmable current sinks max. 40mA Possible external PWM dimming input DLS, CABC Battery Charger Programmable trickle charging 25-220mA Programmable constant current charging up to 1500mA Programmable constant voltage charging 3.9V-4.25V Charger time-out and temperature supervision Selectable current limitation for USB mode Integrated battery switch & ideal diode linear mode External battery switch control switching mode External 30V OV protection Supervisor Automatic battery monitoring with interrupt generation and selectable warning level Automatic temperature monitoring with interrupt generation and selectable warning and shutdown levels Real Time Clock Ultra low power 32kHz oscillator Sec and minute counter, auto wake-up Programmable alarm Repeating alarm seconds, minutes, 2 minutes, or 8 minutes 32kHz clock output to peripheral <1µA total power consumption General Purpose IOs 10-bit general purpose ADC input Wake-up/sleep and DVM input PWM DLS, CABC dimming input Status output for charger, low battery, power good and step-up over-current Q32k clock output Interrupt output PWM output Step-up feedback input 1 - 98 OTP programmable BOOT Sequence Programmable regulator default voltages Programmable start-up sequence General Purpose ADC 10-bit resolution Several internal / external sources - VUSB, VSUP, CHGIN, VBAT - GPIOx, CURRx - XOUT32K, SENSEN_SU1, FB_SU3 - Chip temperature Figure AS3710 Block Diagram Control Interface I2C control lines, including watchdog ON input Bidirectional reset, with selectable delay Ultra low power standby mode Power-On Reset Circuit Packaging QFN56 7x7mm 0.4mm pitch 3 Application The device is suitable for Portable Media Players, Portable Navigation Devices, E-Books, Mobile Internet Devices, and Tablet PCs.. 2 - 98 AS3710 2V1 Datasheet - Contents Contents 1 General Description 1 2 Key Features 1 3 Application 2 4 Pin Assignments 4 Pin Descriptions 4 5 Absolute Maximum Ratings 7 6 Electrical Characteristics 8 7 Typical Operating Characteristics 9 8 Detailed Description - Power Management Functions 10 DCDC Step-Down Converter 10 Analog LDO Regulators 16 Digital LDO Regulators 18 Low power LDO V2_5 Regulators 20 DCDC Step-Up Converter 21 Current Sinks 27 Charger 28 9 Detailed Description - System Functions 36 Start-up 36 Reset 38 Stand-by 40 Internal References 41 GPIO Pins 42 Supervisor 45 Watchdog 46 Interrupt Generation 47 10-Bit ADC 48 Real Time Clock 50 2-Wire-Serial Control Interface 51 10 Register Overview 53 11 Application Information 91 12 Package Drawings and Markings 94 13 Ordering Information 97 3 - 98 AS3710 2V1 Datasheet - Pin Assignments 4 Pin Assignments Figure Pin Assignments Top View 4 - 98 AS3710 2V1 Datasheet - Pin Assignments Pin Descriptions Table Pin Descriptions Pin Name Number AS3710 1 EXTBATSW XOFF CHGIN 4 VSUP_CHG CHGOUT VSUP_SD3 LX_SD3 FB_SD3 FB_SD2 LX_SD2 11 VSUP_SD2 FB_SD1 LX_SD1 14 VSUP_SD1 CURR1 CURR2 CURR3 18 VINLDO78 LDO8 LDO7 21 VSUP_GPIO XRES GPIO1 GPIO2 GPIO3 GPIO4 LDO2 31 VINLDO123 Datasheet - Ordering Information 13 Ordering Information The devices are available as the standard products shown below. Table Ordering Information Ordering Code AS3710-BQFR-FF AS3710-BQFP-00 Marking M2V1-FF M2V1-00 Sequence sequence programmable on request default sequence AS3710-BQFP-xx M2V1-xx customer specified Description Triple Buck High Current PMIC with Charger Triple Buck High Current PMIC with Charger Triple Buck High Current PMIC with Charger Delivery Form Package Tray QFN56 7x7 0.4mm pitch Tape & Reel dry pack Tape & Reel dry pack QFN56 7x7 0.4mm pitch QFN56 7x7 0.4mm pitch Note All products are RoHS compliant and austriamicrosystems green. Buy our products or get free samples online at ICdirect: Technical Support is available at For further information and requests, please contact us mailto or find your local distributor at 97 - 98 AS3710 2V1 Datasheet - Copyrights Copyrights Copyright 1997-2012, austriamicrosystems AG, Tobelbaderstrasse 30, 8141 Unterpremstaetten, Austria-Europe. Trademarks Registered All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. All products and companies mentioned are trademarks or registered trademarks of their respective companies. Disclaimer Devices sold by austriamicrosystems AG are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. austriamicrosystems AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with austriamicrosystems AG for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by austriamicrosystems AG for each application. For shipments of less than 100 parts the manufacturing flow might show deviations from the standard production flow, such as test flow or test location. The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However, austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems AG rendering of technical or other services. Contact Information Headquarters austriamicrosystems AG Tobelbaderstrasse 30 A-8141 Unterpremstaetten, Austria Tel +43 0 3136 500 0 Fax +43 0 3136 525 01 For Sales Offices, Distributors and Representatives, please visit: 98 - 98

PDF Datasheet Preview

Datasheet

AS3710

Triple Buck High Current PMIC with Charger
1 General Description

The AS3710 is a compact System PMU with integrated battery charger and back light driver.

The device offers advanced power management functions. All necessary ICs and peripherals in a battery powered mobile device are supplied by the AS3710. It features 3 DCDC buck converters as well as 8 low noise LDOs. The different regulated supply voltages are programmable via the serial control interface. 4MHz operation with 1uH coils are reducing cost and PCB space.

The three step-up converter generate voltages for e.g.the backlight, classD amplifier, USB host support or LCD display supply. Both constant voltage for e.g. OLED supply as well as constant current white LED backlight operations with three current sinks are possible. An internal voltage protection is limiting the output voltage in the case of external component failures.

AS3710 contains a linear or switching mode Li-Ion battery charger with constant current and constant voltage. The maximum charging current is 1.5A. An integrated battery switch and an optional external switch are separating the battery during charging or whenever an external power supply is present. With this switch it is also possible to operate with no or deeply discharged batteries. A programmable current limit 100mA - 2.5A can be used to control the maximum current used from a USB supply or charger input. Additional features are a 30V OV protection and battery temperature supervision.

The single supply voltage may vary from 2.7V to 5.5V.
2 Key Features

Voltage Generation 3 DCDC step down regulators 2-4MHz
- DVM 0.6V-3.3V;1x 1.2-1.5A, 2x 0.7-1A - 60µA quiescent current - 2A with combined DCDC 2 & 3 2 analog low noise LDOs, 6 digital LDOs
- 2x 1.2-3-3V, 6x 0.9-3.3V 150-300mA - 30µA quiescent current low power mode 1 ultra low power always on LDO 2.5V, 10mA

Power supply supervision
4sec and 8sec emergency shut-down

Stand-by function with voltage selection

HV Backlight Driver 3x step up with external transistor
- e.g. Voltage control mode and over-voltage protection 3 programmable current sinks max. 40mA Possible external PWM dimming input DLS, CABC

Battery Charger Programmable trickle charging 25-220mA Programmable constant current charging up to 1500mA Programmable constant voltage charging 3.9V-4.25V Charger time-out and temperature supervision Selectable current limitation for USB mode Integrated battery switch & ideal diode linear mode External battery switch control switching mode External 30V OV protection

Supervisor Automatic battery monitoring with interrupt generation and selectable warning level Automatic temperature monitoring with interrupt generation and selectable warning and shutdown levels

Real Time Clock Ultra low power 32kHz oscillator Sec and minute counter, auto wake-up Programmable alarm Repeating alarm seconds, minutes, 2 minutes, or 8 minutes 32kHz clock output to peripheral <1µA total power consumption

General Purpose IOs 10-bit general purpose ADC input Wake-up/sleep and DVM input PWM DLS, CABC dimming input Status output for charger, low battery, power good and step-up over-current Q32k clock output Interrupt output PWM output Step-up feedback input
1 - 98

OTP programmable BOOT Sequence Programmable regulator default voltages Programmable start-up sequence

General Purpose ADC 10-bit resolution Several internal / external sources - VUSB, VSUP, CHGIN, VBAT - GPIOx, CURRx - XOUT32K, SENSEN_SU1, FB_SU3 - Chip temperature

Figure AS3710 Block Diagram

Control Interface I2C control lines, including watchdog ON input Bidirectional reset, with selectable delay Ultra low power standby mode

Power-On Reset Circuit

Packaging

QFN56 7x7mm 0.4mm pitch
3 Application

The device is suitable for Portable Media Players, Portable Navigation Devices, E-Books, Mobile Internet Devices, and Tablet PCs..
2 - 98

AS3710 2V1

Datasheet - Contents

Contents
1 General Description 1 2 Key Features 1 3 Application 2 4 Pin Assignments 4

Pin Descriptions 4 5 Absolute Maximum Ratings 7 6 Electrical Characteristics 8 7 Typical Operating Characteristics 9 8 Detailed Description - Power Management Functions 10
DCDC Step-Down Converter 10 Analog LDO Regulators 16 Digital LDO Regulators 18 Low power LDO V2_5 Regulators 20 DCDC Step-Up Converter 21 Current Sinks 27 Charger 28 9 Detailed Description - System Functions 36 Start-up 36 Reset 38 Stand-by 40 Internal References 41 GPIO Pins 42 Supervisor 45 Watchdog 46 Interrupt Generation 47 10-Bit ADC 48 Real Time Clock 50 2-Wire-Serial Control Interface 51 10 Register Overview 53 11 Application Information 91 12 Package Drawings and Markings 94 13 Ordering Information 97
3 - 98

AS3710 2V1

Datasheet - Pin Assignments
4 Pin Assignments

Figure Pin Assignments Top View
4 - 98

AS3710 2V1

Datasheet - Pin Assignments

Pin Descriptions

Table Pin Descriptions

Pin Name

Number AS3710
1 EXTBATSW

XOFF

CHGIN
4 VSUP_CHG

CHGOUT

VSUP_SD3

LX_SD3

FB_SD3

FB_SD2

LX_SD2
11 VSUP_SD2

FB_SD1

LX_SD1
14 VSUP_SD1

CURR1

CURR2

CURR3
18 VINLDO78

LDO8

LDO7
21 VSUP_GPIO

XRES

GPIO1

GPIO2

GPIO3

GPIO4

LDO2
31 VINLDO123
Datasheet - Ordering Information
13 Ordering Information

The devices are available as the standard products shown below.
Table Ordering Information
Ordering Code AS3710-BQFR-FF

AS3710-BQFP-00

Marking M2V1-FF

M2V1-00

Sequence
sequence programmable on
request
default sequence

AS3710-BQFP-xx M2V1-xx customer specified

Description Triple Buck High Current PMIC
with Charger

Triple Buck High Current PMIC with Charger

Triple Buck High Current PMIC with Charger

Delivery Form

Package

Tray

QFN56 7x7 0.4mm pitch

Tape & Reel dry pack

Tape & Reel dry pack

QFN56 7x7 0.4mm pitch QFN56 7x7 0.4mm pitch

Note All products are RoHS compliant and austriamicrosystems green. Buy our products or get free samples online at ICdirect:

Technical Support is available at

For further information and requests, please contact us mailto or find your local distributor at
97 - 98

AS3710 2V1

Datasheet - Copyrights

Copyrights

Copyright 1997-2012, austriamicrosystems AG, Tobelbaderstrasse 30, 8141 Unterpremstaetten, Austria-Europe. Trademarks Registered All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. All products and companies mentioned are trademarks or registered trademarks of their respective companies.

Disclaimer

Devices sold by austriamicrosystems AG are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. austriamicrosystems AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with austriamicrosystems AG for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by austriamicrosystems AG for each application. For shipments of less than 100 parts the manufacturing flow might show deviations from the standard production flow, such as test flow or test location. The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However, austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems AG rendering of technical or other services.

Contact Information

Headquarters austriamicrosystems AG Tobelbaderstrasse 30 A-8141 Unterpremstaetten, Austria Tel +43 0 3136 500 0 Fax +43 0 3136 525 01

For Sales Offices, Distributors and Representatives, please visit:
98 - 98

More datasheets: ADM1028ARQ | M3249 SL005 | M3249 SL001 | M3249 SL002 | SEN0240 | 13902 | 100395QC | 100395QCX | AS3710-BQFP-00 | AS3710-BQFR-FF

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS3710-BQFP-01 Datasheet file may be downloaded here without warranties.

Datasheet ID: AS3710-BQFP-01 519711