B72762A2170S160

B72762A2170S160 Datasheet

B72762A2170S160

Part	Datasheet
B72762A2170S160	B72762A2170S160 (pdf)

PDF Datasheet Preview
Ceramic transient voltage suppressors SMD multilayer transient voltage suppressors, low capacitance series The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product B72762A2170S160 Date of Withdrawal 2012-11-09 Deadline Last Orders 2013-03-01 Last Shipments 2013-06-01 For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. Multilayer varistors MLVs Low capacitance series EPCOS type designation system for low capacitance series Construction CT Single chip with nickel barrier termination AgNiSn CA Chip array with nickel barrier termination AgNiSn Case sizes 0603 single chip 0805 single chip 04 0405 array 06 0612 array Number of elements per component Single chip P2 Array with 2 elements P4 Array with 4 elements Tolerance of the varistor voltage K ±10% S Special tolerance Maximum RMS operating voltage VRMS 17 V Special features Standard A Special tolerance T Internal coding Low capacitance series Taping mode G 180-mm reel Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 34 Multilayer varistors MLVs Low capacitance series Features ESD protection level acc. ISO 10605, IEC 61000-4-2 Level 4 Bidirectional protection Low capacitance Low insertion loss Low leakage current No signal distortion RoHS-compatible Suitable for lead-free soldering PSpice simulation models available Customer-specific types on request Applications ESD protection of data lines e.g. in notebooks and portable devices Design Multilayer technology Lack of plastic or epoxy encapsulation for flammability rating better than UL 94 V-0 Termination see “Soldering directions” CT and CA types with nickel barrier terminations AgNiSn , recommended for lead-free soldering, and compatible with tin/lead solder. V/I characteristics and derating curves V/I and derating curves are attached to the data sheet. The curves are sorted by VRMS and then by case size, which is included in the type designation. Single chip Internal circuit Available case sizes: EIA 0603 0805 Metric 1608 2012 Array Internal circuit 2-fold array 4-fold array Available case sizes: EIA 0405 0612 Metric 1014 1632 Version 2-fold array 4-fold array Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 34 Multilayer varistors MLVs Low capacitance series Electrical specifications and ordering codes Maximum ratings Top,max Type Ordering code V I RMS,max DC,max surge,max 8/20 µs W P max diss,max mJ mW Top,max °C 2-fold array CA04P2S17TLCG 4-fold array B72762A2170S160 17 22 10 CA06P4S17TLCG Single chip B72724A2170S162 17 22 30 CT0603K17LCG CT0603S17ALCG CT0805K17LCG B72500T2170K060 17 B72500T2170S160 17 B72510T2170K062 17 22 10 22 30 22 30 100 1 75 3 100 4 +125 +125 +125 Characteristics TA = 25 °C Type 2-fold array CA04P2S17TLCG 4-fold array CA06P4S17TLCG Single chip CT0603K17LCG CT0603S17ALCG CT0805K17LCG VV,min 1 mA V VV,max 1 mA V Vclamp,max V Iclamp 8/20 µs A Cmax 1 MHz, 1 V pF Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 34 Multilayer varistors MLVs Low capacitance series Dimensional drawings Single chip 2-fold array 4-fold array Dimensions in mm Case size EIA / mm 0603 / 1608 0805 / 2012 0405 / 1014 0612 / 1632 max. max. max. max. Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 34 Multilayer varistors MLVs Low capacitance series Recommended solder pad layout Single chip Ordering code B72762A2170S160 B72724A2170S162 B72500T2170K060 B72500T2170S160 B72510T2170K062 Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 34 Multilayer varistors MLVs Low capacitance series V/I characteristics CT0603K17LCG CT0603S17ALCG Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 34 Multilayer varistors MLVs Low capacitance series V/I characteristics CT0805K17LCG CA04P2S17TLCG Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 34 Multilayer varistors MLVs Low capacitance series V/I characteristics CA06P4S17TLCG Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 34 Multilayer varistors MLVs Low capacitance series Derating curves Maximum surge current Isurge,max = f tr, pulse train For explanation of the derating curves refer to "General technical information", chapter CT0603K17LCG CA04P2S17TLCG CT0603S17ALCG CT0805K17LCG Please read Cautions and warnings and Important notes at the end of this document. CA06P4S17TLCG Page 11 of 34 Multilayer varistors MLVs Low capacitance series Taping and packing Taping and packing for SMD components Blister tape the taping to IEC 60286-3 Dimensions in mm 8-mm tape Case size inch/mm 0508/ 0612/ 1220 1632 0603/ 1608 0506/ 0805/ 1206/ 1216 2012 3216 1 mm over 10 sprocket holes. 1012/ 2532 1210/ 3225 12-mm tape Case size inch/mm 16-mm tape

PDF Datasheet Preview

Ceramic transient voltage suppressors

SMD multilayer transient voltage suppressors, low capacitance series

The following products presented in this data sheet are being withdrawn.
Ordering Code

Substitute Product

B72762A2170S160

Date of Withdrawal 2012-11-09

Deadline Last Orders 2013-03-01

Last Shipments 2013-06-01

For further information please contact your nearest EPCOS sales office, which will also support you in selecting a suitable substitute. The addresses of our worldwide sales network are presented at

EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Multilayer varistors MLVs Low capacitance series

EPCOS type designation system for low capacitance series

Construction CT Single chip with nickel barrier termination AgNiSn CA Chip array with nickel barrier termination AgNiSn

Case sizes 0603 single chip 0805 single chip
04 0405 array 06 0612 array

Number of elements per component Single chip P2 Array with 2 elements P4 Array with 4 elements

Tolerance of the varistor voltage K ±10% S Special tolerance

Maximum RMS operating voltage VRMS 17 V

Special features Standard A Special tolerance T Internal coding

Low capacitance series

Taping mode G 180-mm reel

Please read Cautions and warnings and Important notes at the end of this document.

Page 2 of 34

Multilayer varistors MLVs Low capacitance series

Features ESD protection level acc. ISO 10605, IEC 61000-4-2 Level 4 Bidirectional protection Low capacitance Low insertion loss Low leakage current No signal distortion RoHS-compatible Suitable for lead-free soldering PSpice simulation models available Customer-specific types on request

Applications ESD protection of data lines e.g. in notebooks and portable devices

Design Multilayer technology Lack of plastic or epoxy encapsulation for flammability rating better than UL 94 V-0 Termination see “Soldering directions” CT and CA types with nickel barrier terminations AgNiSn , recommended for lead-free soldering, and compatible with tin/lead solder.

V/I characteristics and derating curves V/I and derating curves are attached to the data sheet. The curves are sorted by VRMS and then by case size, which is included in the type designation.

Single chip Internal circuit

Available case sizes:

EIA 0603 0805

Metric 1608 2012

Array Internal circuit
2-fold array
4-fold array

Available case sizes:

EIA 0405 0612

Metric 1014 1632

Version 2-fold array 4-fold array

Please read Cautions and warnings and Important notes at the end of this document.

Page 3 of 34

Multilayer varistors MLVs Low capacitance series
Electrical specifications and ordering codes Maximum ratings Top,max

Type
Ordering code

V I RMS,max DC,max surge,max 8/20 µs

W P max
diss,max
mJ mW

Top,max °C
2-fold array

CA04P2S17TLCG 4-fold array

B72762A2170S160 17
22 10

CA06P4S17TLCG Single chip

B72724A2170S162 17
22 30

CT0603K17LCG CT0603S17ALCG CT0805K17LCG

B72500T2170K060 17 B72500T2170S160 17 B72510T2170K062 17
22 10 22 30 22 30
100 1 75 3
100 4
+125 +125 +125

Characteristics TA = 25 °C

Type
2-fold array CA04P2S17TLCG 4-fold array CA06P4S17TLCG Single chip CT0603K17LCG CT0603S17ALCG CT0805K17LCG

VV,min 1 mA V

VV,max 1 mA V

Vclamp,max V

Iclamp 8/20 µs A

Cmax 1 MHz, 1 V pF

Please read Cautions and warnings and Important notes at the end of this document.

Page 5 of 34

Multilayer varistors MLVs Low capacitance series

Dimensional drawings Single chip
2-fold array
4-fold array

Dimensions in mm

Case size EIA / mm 0603 / 1608 0805 / 2012 0405 / 1014 0612 / 1632
max. max. max. max.

Please read Cautions and warnings and Important notes at the end of this document.

Page 6 of 34

Multilayer varistors MLVs Low capacitance series

Recommended solder pad layout

Single chip
Ordering code

B72762A2170S160 B72724A2170S162 B72500T2170K060 B72500T2170S160 B72510T2170K062

Please read Cautions and warnings and Important notes at the end of this document.

Page 7 of 34

Multilayer varistors MLVs Low capacitance series

V/I characteristics

CT0603K17LCG

CT0603S17ALCG

Please read Cautions and warnings and Important notes at the end of this document.

Page 8 of 34

Multilayer varistors MLVs Low capacitance series

V/I characteristics

CT0805K17LCG

CA04P2S17TLCG

Please read Cautions and warnings and Important notes at the end of this document.

Page 9 of 34

Multilayer varistors MLVs Low capacitance series V/I characteristics

CA06P4S17TLCG

Please read Cautions and warnings and Important notes at the end of this document.

Page 10 of 34

Multilayer varistors MLVs Low capacitance series

Derating curves Maximum surge current Isurge,max = f tr, pulse train For explanation of the derating curves refer to "General technical information", chapter

CT0603K17LCG

CA04P2S17TLCG

CT0603S17ALCG CT0805K17LCG

Please read Cautions and warnings and Important notes at the end of this document.

CA06P4S17TLCG Page 11 of 34

Multilayer varistors MLVs Low capacitance series

Taping and packing

Taping and packing for SMD components

Blister tape the taping to IEC 60286-3

Dimensions in mm 8-mm tape

Case size inch/mm
0508/ 0612/ 1220 1632
0603/ 1608
0506/ 0805/ 1206/ 1216 2012 3216
1 mm over 10 sprocket holes.
1012/ 2532 1210/ 3225
12-mm tape

Case size inch/mm
16-mm tape

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived B72762A2170S160 Datasheet file may be downloaded here without warranties.

Datasheet ID: B72762A2170S160 511650