BP/ATM-TAP
Part | Datasheet |
---|---|
![]() |
BP/HMK-RP (pdf) |
Related Parts | Information |
---|---|
![]() |
BP/HHH-RP |
![]() |
BP/HHA-RP |
![]() |
BK/ATC-TAP |
![]() |
BK/ATM-TAP |
![]() |
BP/HHU |
![]() |
BP/HMK |
![]() |
BP/HHS-RP |
PDF Datasheet Preview |
---|
Consumer Aftermarket Product Catalog Fuse Holders and Taps Consumer Aftermarket Catalog Fuse Holders & Taps Cooper Bussmann offers a complete line of fuse holders to install either blade-type or glass tube fuses. Choose water resistant and/or splash-proof versions for extra protection in special applications. Four types of connectors are available to meet the needs of technicians and do-it-yourselfers • Wire Loop. To install, simply cut the wire, strip ends and attach each end to the circuit. Requires the use of additional connectors. • Crimp-On. Strip wire and insert into fuse holder. Crimp the connections tightly, and you're done. No additional hardware needed. • Self-Stripping. Easy to install simply locate fuse holder at a convenient spot along the wire. Snap fuse holder closed around wire to pierce insulation automatically. • Quick-Connect. Attach fully insulated female push-on terminal onto the 1/4” quick-connect terminals. When selecting a fuse holder, always match the device to the wire being fused. Using an undersized fuse holder will increase electrical resistance in the circuit and reduce performance. NOTE Never install a fuse with a larger amp rating than specified for the holder. Blade-Type Fuse Holders In-Line Fuse Holders for ATM Fuses Blister Tri-Lingual Maximum Part No. Pack Blister Volts/Amps Leadwire Description 32V/20A 2x4”/#16 Holder with cover 32V/30A 2x4”/#12 Holder with cover 32V/30A 2x4”/#12 Water-resistant holder ATM-FHID* 32V/20A 2x4”/#16 Illuminating holder * For use with regular ATM fuses. For details on the easyID line of illuminating ATM blade fuses, see page HHU HHM ATM-FHID In-Line Fuse Holders for ATC Fuses Blister Tri-Lingual Maximum Part No. Pack Blister Volts/Amps Leadwire Description 32V/20A 2x4”/#16 Yellow water-resistant holder 32V/30A 2x4”/#12 Heavy-duty fuse holder HHD-30 32V/30A 2x4”/#12 Holder with ATC-30A fuse 32V/20A 2x4”/#16 Holder with protective cover 32V/30A 2x4”/#12 Heavy-duty holder with cover 32V/30A 2x5”/#12 Heavy-duty water-resistant holder 32V/20A #18 to #14 Self-stripping fuse holder ATC-FHID* 32V/20A 2x6”/#16 Illuminating holder * For use with regular ATC fuses. For details on the easyID line of illuminating ATC blade fuses, see page ATC-FHID In-Line Fuse Holders for Maxi Fuses Part No. Volts/Amps Leadwire Description HHX 32V/20-60A 2x5”/#6 Fuse holder with cover For product information and data sheets, visit Consumer Aftermarket Catalog Fuse Holders & Taps Fuse Taps For ATM and ATC Fuses Tap into an existing circuit to power a mobile phone, stereo components, etc. with Cooper Bussmann fuse tap accessories. |
More datasheets: FSBB20CH60L | FDU6030BL | AT-42085G | 1375 | BP/HHH-RP | BP/HHA-RP | BK/ATC-TAP | BK/ATM-TAP | BP/HHU | BP/HMK |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BP/HMK-RP Datasheet file may be downloaded here without warranties.