BP/HHU

BP/HHU Datasheet


BP/ATM-TAP

Part Datasheet
BP/HHU BP/HHU BP/HHU (pdf)
Related Parts Information
BP/HHH-RP BP/HHH-RP BP/HHH-RP
BP/HHA-RP BP/HHA-RP BP/HHA-RP
BK/ATC-TAP BK/ATC-TAP BK/ATC-TAP
BK/ATM-TAP BK/ATM-TAP BK/ATM-TAP
BP/HMK BP/HMK BP/HMK
BP/HMK-RP BP/HMK-RP BP/HMK-RP
BP/HHS-RP BP/HHS-RP BP/HHS-RP
PDF Datasheet Preview
Consumer Aftermarket Product Catalog

Fuse Holders and Taps

Consumer Aftermarket Catalog

Fuse Holders & Taps

Cooper Bussmann offers a complete line of fuse holders to install either blade-type or glass tube fuses. Choose water resistant and/or splash-proof versions for extra protection in special applications. Four types of connectors are available to meet the needs of technicians and do-it-yourselfers
• Wire Loop. To install, simply cut the wire, strip ends and attach each end to the circuit. Requires the use of additional connectors.
• Crimp-On. Strip wire and insert into fuse holder. Crimp the connections tightly, and you're done. No additional hardware needed.
• Self-Stripping. Easy to install simply locate fuse holder at a convenient spot along the wire. Snap fuse holder closed around wire to pierce insulation automatically.
• Quick-Connect. Attach fully insulated female push-on terminal onto the 1/4” quick-connect terminals.

When selecting a fuse holder, always match the device to the wire being fused. Using an undersized fuse holder will increase electrical resistance in the circuit and reduce performance. NOTE Never install a fuse with a larger amp rating than specified for the holder.

Blade-Type Fuse Holders

In-Line Fuse Holders for ATM Fuses

Blister Tri-Lingual Maximum Part No. Pack Blister Volts/Amps Leadwire Description
32V/20A 2x4”/#16 Holder with cover
32V/30A 2x4”/#12 Holder with cover
32V/30A 2x4”/#12 Water-resistant holder

ATM-FHID*
32V/20A 2x4”/#16 Illuminating holder
* For use with regular ATM fuses. For details on the easyID line of illuminating ATM blade fuses, see page

HHU HHM

ATM-FHID

In-Line Fuse Holders for ATC Fuses

Blister Tri-Lingual Maximum

Part No. Pack Blister Volts/Amps Leadwire Description
32V/20A 2x4”/#16 Yellow water-resistant holder
32V/30A 2x4”/#12 Heavy-duty fuse holder

HHD-30
32V/30A 2x4”/#12 Holder with ATC-30A fuse
32V/20A 2x4”/#16 Holder with protective cover
32V/30A 2x4”/#12 Heavy-duty holder with cover
32V/30A 2x5”/#12 Heavy-duty water-resistant holder
32V/20A #18 to #14 Self-stripping fuse holder

ATC-FHID*
32V/20A 2x6”/#16 Illuminating holder
* For use with regular ATC fuses. For details on the easyID line of illuminating ATC blade fuses, see page

ATC-FHID

In-Line Fuse Holders for Maxi Fuses Part No. Volts/Amps Leadwire Description HHX 32V/20-60A 2x5”/#6 Fuse holder with cover

For product information and data sheets, visit

Consumer Aftermarket Catalog

Fuse Holders & Taps

Fuse Taps For ATM and ATC Fuses

Tap into an existing circuit to power a mobile phone, stereo components, etc. with Cooper Bussmann fuse tap accessories.
More datasheets: 3B45-CUSTOM | 19-21/W1D-ANPHY/3T | FSBB20CH60L | FDU6030BL | AT-42085G | 1375 | BP/HHH-RP | BP/HHA-RP | BK/ATC-TAP | BK/ATM-TAP


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BP/HHU Datasheet file may be downloaded here without warranties.

Datasheet ID: BP/HHU 506782