NIS5132MN1-FN-7

NIS5132MN1-FN-7 Datasheet

NIS5132

Part	Datasheet
NIS5132MN1-FN-7	NIS5132MN1-FN-7 (pdf)

Related Parts	Information
NIS5132MN2-FN-7	NIS5132MN2-FN-7

PDF Datasheet Preview
NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART Green NIS5132 3.6A 12V RESETTABLE ELECTRONIC FUSE The NIS5132 is a self-protected resettable electronic fuse designed for consumer applications such as hard disk drives, to industrial applications to enhance system reliability against catastrophic and shutdown failures. To support a wide range of demanding applications, the design has been optimized to operate over the supply range of 9.0V to 18V. For robustness and protections, the device integrates a low RDS ON NMOS buffer power device along with an undervoltage lockout, overvoltage clamp, a current limit, a dv/dt control and a thermal shutdown circuits. The overvoltage circuit limits the output voltage without shutting the device down to allow the load to continue operating during over voltage. Thermal shutdown can be either latching type NIS5132MN1 or auto-retry type NIS5132MN2 . Pin Assignments Top View GND 1 dv/dt 22 Enable/Fault 3 ILIMIT 4 NIS5132MN1 NIS5132MN2 U-DFN3030-10 10 Source 29 Source 8 Source 7 Source 6 Source • to 18V Operating Input Voltage • Integrated NMOS Power Device with RDS ON of 30mΩ Typical • Internal Current Limit - No External Current Sense Resistor in Load Path • Under Voltage Lockout • Over Voltage Clamp NIS5132MN1 and NIS5132MN2 • Thermal Shutdown • -40C to +150C Operating Junction Temperature • ESD Ratings HBM > 1500V MM 200V • Small Low Profile U-DFN3030-10 Package • UL Recognized, Report E322375-20140529 • Lead-Free Finish RoHS Compliant Notes 1 & 2 • Halogen and Antimony Free. “Green” Device Note 3 • Hard Drives • Mother Board Power Management • Printer Load Power Management EU Directive 2002/95/EC RoHS & 2011/65/EU RoHS 2 compliant. All applicable RoHS exemptions applied. See for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine <1500ppm total Br + Cl and <1000ppm antimony compounds. Typical Application Circuits +12V 11 VDD Source 10 10µF NIS5132 ENABLE 3 Enable ILIMIT 4 dv/dt Cdv/dt 100µF Load Figure Application Circuit with Direct Current Sensing NIS5132 1 of 12 May 2017 Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART Typical Application Circuits Cont. NIS5132 +12V 11 VDD Ordering Information NIS5132 XXX - XXX - 7 Feature Option MN1 Thermal latching with VCLAMP MN2 Thermal auto-retry with VCLAMP Package FN U-DFN3030-10 Packing 7 Tape & Reel NIS5132MN1-FN-7 NIS5132MN2-FN-7 Package Code FN Packaging U-DFN3030-10 U-DFN3030-10 7” Tape and Reel Quantity Part Number Suffix 3,000/Tape & Reel 3,000/Tape & Reel NIS5132 9 of 12 May 2017 Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART Marking Information 1 Package Type U-DFN3030-10 Top View XX YWX XX Identification Code Y Year 0~9 W Week A~Z 1~26 week a~z 27~52 week z represents 52 and 53 week X A~Z Internal code NIS5132 Part Number NIS5132MN1 NIS5132MN2 Package U-DFN3030-10 U-DFN3030-10 Package Outline Dimensions Please see for the latest version. U-DFN3030-10 Pin#1 ID A3 SEATING PLANE L b ze Suggested Pad Layout Please see for the latest version. U-DFN3030-10 NIS5132 10 of 12

PDF Datasheet Preview

NOT RECOMMENDED FOR NEW DESIGN

NO ALTERNATE PART

Green

NIS5132
3.6A 12V RESETTABLE ELECTRONIC FUSE

The NIS5132 is a self-protected resettable electronic fuse designed for consumer applications such as hard disk drives, to industrial applications to enhance system reliability against catastrophic and shutdown failures.

To support a wide range of demanding applications, the design has been optimized to operate over the supply range of 9.0V to 18V. For robustness and protections, the device integrates a low RDS ON NMOS buffer power device along with an undervoltage lockout, overvoltage clamp, a current limit, a dv/dt control and a thermal shutdown circuits. The overvoltage circuit limits the output voltage without shutting the device down to allow the load to continue operating during over voltage. Thermal shutdown can be either latching type NIS5132MN1 or auto-retry type NIS5132MN2 .

Pin Assignments

Top View

GND 1 dv/dt 22 Enable/Fault 3 ILIMIT 4

NIS5132MN1 NIS5132MN2

U-DFN3030-10
10 Source 29 Source 8 Source 7 Source 6 Source
• to 18V Operating Input Voltage
• Integrated NMOS Power Device with RDS ON of 30mΩ Typical
• Internal Current Limit - No External Current Sense Resistor in

Load Path
• Under Voltage Lockout
• Over Voltage Clamp NIS5132MN1 and NIS5132MN2
• Thermal Shutdown
• -40C to +150C Operating Junction Temperature
• ESD Ratings HBM > 1500V MM 200V
• Small Low Profile U-DFN3030-10 Package
• UL Recognized, Report E322375-20140529
• Lead-Free Finish RoHS Compliant Notes 1 & 2
• Halogen and Antimony Free. “Green” Device Note 3
• Hard Drives
• Mother Board Power Management
• Printer Load Power Management

EU Directive 2002/95/EC RoHS & 2011/65/EU RoHS 2 compliant. All applicable RoHS exemptions applied. See for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine <1500ppm total Br + Cl and
<1000ppm antimony compounds.

Typical Application Circuits
+12V
11 VDD

Source 10
10µF

NIS5132

ENABLE
3 Enable

ILIMIT 4
dv/dt

Cdv/dt
100µF Load

Figure Application Circuit with Direct Current Sensing

NIS5132
1 of 12

May 2017

Diodes Incorporated

NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART

Typical Application Circuits Cont.

NIS5132
+12V
11 VDD
Ordering Information

NIS5132 XXX - XXX - 7

Feature Option

MN1 Thermal latching with VCLAMP MN2 Thermal auto-retry with VCLAMP

Package FN U-DFN3030-10

Packing 7 Tape & Reel

NIS5132MN1-FN-7 NIS5132MN2-FN-7

Package Code FN

Packaging

U-DFN3030-10 U-DFN3030-10
7” Tape and Reel

Quantity

Part Number Suffix
3,000/Tape & Reel
3,000/Tape & Reel

NIS5132
9 of 12

May 2017

Diodes Incorporated

NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART

Marking Information
1 Package Type U-DFN3030-10

Top View

XX YWX

XX Identification Code Y Year 0~9

W Week A~Z 1~26 week a~z 27~52 week z represents 52 and 53 week

X A~Z Internal code

NIS5132

Part Number NIS5132MN1 NIS5132MN2

Package U-DFN3030-10 U-DFN3030-10

Package Outline Dimensions

Please see for the latest version.

U-DFN3030-10

Pin#1 ID

A3 SEATING PLANE

L b ze

Suggested Pad Layout

Please see for the latest version.

U-DFN3030-10

NIS5132
10 of 12

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived NIS5132MN1-FN-7 Datasheet file may be downloaded here without warranties.

Datasheet ID: NIS5132MN1-FN-7 510024