SEN0127

SEN0127 Datasheet

Gravity Analog Gas Sensor MQ2 For Arduino

Part	Datasheet
SEN0127	SEN0127 (pdf)

PDF Datasheet Preview
Gravity Analog Gas Sensor MQ2 For Arduino SKU:SEN0127 INTRODUCTION This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke. It can be used in gas leakage detecting device in consumer and industry markets. It has a high sensitivity and fast response time. The sensitivity can be adjusted by the potentiometer. The output is proportional to the density of gas. You can use analog reading to read the data from this sensor. To ease the difficulty of using this sensor, a Gravity Interface is adapted to allow plug&play. The Arduino IO expansion shield is the best match for this senor connecting to your Arduino. As this sensor can work at 3.3V which makes it compatible with Raspberry Pi, intel edison, joule and curie. Improvement List • Standard assembling structure Times-of-5mm Center distance between two 3mm mounting holes • Easily recognitive interfaces of sensors "A" for analog and "D" for digital • Icons to simplely illustrate sensor function • High quality connector • Immersion gold surface SPECIFICATION • Power supply needs 5V • Interface type Analog • Wide detecting scope • Fast response and High sensitivity • Simple drive circuit • Stable and long life • Size:36.4x26.6mm 1.4x1'' SHIPPING LIST • Arduino Gas Sensor MQ2 x1 • Gravity Analog Cable x1 Powered By DFRobot 2008-2017

PDF Datasheet Preview

Gravity Analog Gas Sensor MQ2 For Arduino

SKU:SEN0127

INTRODUCTION

This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke. It can be used in gas leakage detecting device in consumer and industry markets. It has a high sensitivity and fast response time. The sensitivity can be adjusted by the potentiometer. The output is proportional to the density of gas. You can use analog reading to read the data from this sensor. To ease the difficulty of using this sensor, a Gravity Interface is adapted to allow plug&play. The Arduino IO expansion shield is the best match for this senor connecting to your Arduino. As this sensor can work at 3.3V which makes it compatible with Raspberry Pi, intel edison, joule and curie.

Improvement List
• Standard assembling structure Times-of-5mm Center distance between two 3mm mounting holes
• Easily recognitive interfaces of sensors "A" for analog and "D" for digital
• Icons to simplely illustrate sensor function
• High quality connector
• Immersion gold surface

SPECIFICATION
• Power supply needs 5V
• Interface type Analog
• Wide detecting scope
• Fast response and High sensitivity
• Simple drive circuit
• Stable and long life
• Size:36.4x26.6mm 1.4x1''

SHIPPING LIST
• Arduino Gas Sensor MQ2 x1
• Gravity Analog Cable x1

Powered By DFRobot 2008-2017

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived SEN0127 Datasheet file may be downloaded here without warranties.

Datasheet ID: SEN0127 509057