CWN-572-50-0021-204

CWN-572-50-0021-204 Datasheet


CWN-XXX-XX-XXXX

Part Datasheet
CWN-572-50-0021-204 CWN-572-50-0021-204 CWN-572-50-0021-204 (pdf)
Related Parts Information
CWN-552-20-0022 CWN-552-20-0022 CWN-552-20-0022
PDF Datasheet Preview
Headers Fully Shrouded

Dimensions

Right Angle Header

Engineering Dimensions
.31.58 TYP. .21.0504 TYP.

CL This polarization rib omitted on sizes 10 and 14

V CL No.1

DIA. 2 HOLES SEE HARDWARE CHART - "Z"

HARDWARE CHART

TYPE

THREAD 2-56 UNC 1-72 UNF 2-56 UNC

HEAD HEX.

RND.

OPT.

SECTION V-V

SECTION V-V

SECTION V-V

DIA. 2 HOLES

CENTERED BETWEEN ADJACENT FLANGES

SEE HARDWARE CHART - "X" or "Y"

TYP.

TYP.

CONTACT LENGTH

DIA.

ROUND CONTACT
* Contact lengths and Tolerances are
different for Mil-Dtl Connectors. Consult

DIA. 2 HOLES

DIA. HOLE TYP. for rnd. cont. or
factory for specifications.

DIA. HOLE TYP. for sq. cont.

RECOMMENDED P.C. BOARD LAYOUT

SQUARE CONTACT

E 1 or 2

CLOSED LATCHES

OPEN LATCHES EJECTOR LATCH OPTIONS

F 1 or 2

Straight Header
.31.58 TYP. .21.0504 TYP.

CL This polarization rib omitted on sizes 10 and 14

V CL No.1
Specifications and Ordering Information

Specifications
• Contacts phosphor bronze standard
• Contact Plating 30µ in. gold in mating area over 50µ in. nickel, standard 10µ gold in mating area over 50µ in. nickel, optional 50µ in. gold in mating area over 50µ in. nickel, optional
• Insulator Material UL 94V-0 flame - retardant thermoplastic
• Color blue
• Operating Temperature -55ºC to +125ºC
• Current Rating 1A maximum per contact
• Dielectric Withstand Voltage greater than 500 Vdc at
sea level
• Insulation Resistance greater than 5 x 109 ohms
• U.S. Defense Department Mil-DTL-83503/24, and
25 approved

How to Order Fully Shrouded Header Connectors

CWN-XXX-XX-XXXX

Type of Connector 5 = polarized header 6 = non-polarized header*

Pin Configuration 0=right angle solder pins.
long 1=right angle solder pins.
long 2=right angle wire wrap 5=straight solder pins,
long 6=straight solder pins,
long 7=straight wire wrap pins

Latches 0=no latches 1=short latches for non-strain
relief sockets 2=long latches for strain relief
sockets

Plating
0021=30µ in. gold in mating
area over 50µ in. nickel
standard
0000=10µ in. gold in mating
area over 50µ in. nickel
0022=50µ in. gold in mating
area over 50µ in. nickel

Mil-DTL -83503 approved.

CWN-5X2 versions only
0077=Duplex plated, 30µ in. gold
in mating area, 100µ in.
tin-lead in solder pin area,
all over 50µ in. nickel

Number of Contacts
optional
10, 14, 16, 20, 26,
34, 40, 50 or 60

NO. CONT's

HEADER DIMENSION CHART

E 1 and F 1 pertains to all headers with short latches E 2 and F 2 pertains to all headers with long latches *Polarizing ribs removed
• 130 James Way, Southampton, PA 18966 - 3838
• Telephone 215 355-7080
• Fax 215 355-1088
• 15
More datasheets: M5526 SL005 | M5526 SL002 | M5526 SL001 | B66481G0000X608 | 13219 | DFR0064 | FDI33N25TU | FJAF6810TU | CR10-1962F-T | 104882-HMC128G8


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CWN-572-50-0021-204 Datasheet file may be downloaded here without warranties.

Datasheet ID: CWN-572-50-0021-204 507597