104882-HMC128G8

104882-HMC128G8 Datasheet

List of Materials for Evaluation PCB 104882 [1]

Part	Datasheet
104882-HMC128G8	104882-HMC128G8 (pdf)

PDF Datasheet Preview
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED THIS PAGE INTENTIONALLY LEFT BLANK v02.1105 The HMC128G8 is ideal for: • Base Station • MMDS • WirelessLAN • Wireless Local Loop Functional Diagram HMC128G8 GaAs MMIC SMT DOUBLEBALANCED MIXER, - 5 GHz Conversion Loss 10 dB LO to RF and IF Isolation >30 dB High Third-Order Intercept +18 dB The HMC128G8 is a miniature double-balanced mixer in a hermetic surface mount package that can be used as an upconverter or downconverter. The device is a passive diode/balun type mixer with high dynamic range. Noise figure is essentially equal to the conversion loss. The mixer can handle larger signal levels than most active mixers due to the high third order intercept. MMIC implementation provides exceptional balance in the circuit resulting in high LO/RF and LO/ IF isolations. MIXERS - DBL-BAL - SMT Electrical Specifications, TA = +25° C, LO Drive = +15 dBm Parameter Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure SSB LO to RF Isolation LO to IF Isolation IP3 Input IP2 Input 1 dB Gain Compression Input Min. Typ. DC - 2 Max. Units GHz dB dBm For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at MIXERS - DBL-BAL - SMT v02.1105 Conversion Gain CONVERSION GAIN dB -5 LO= +15dBm -10 LO= +10dBm RF FREQUENCY GHz Return Loss RETURN LOSS dB -20 0 LO RF FREQUENCY GHz HMC128G8 GaAs MMIC SMT DOUBLEBALANCED MIXER, - 5 GHz Isolation -10 RF/IF [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at

PDF Datasheet Preview

Analog Devices Welcomes Hittite Microwave Corporation

NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

THIS PAGE INTENTIONALLY LEFT BLANK
v02.1105

The HMC128G8 is ideal for:
• Base Station
• MMDS
• WirelessLAN
• Wireless Local Loop

Functional Diagram

HMC128G8

GaAs MMIC SMT DOUBLEBALANCED MIXER, - 5 GHz

Conversion Loss 10 dB LO to RF and IF Isolation >30 dB High Third-Order Intercept +18 dB

The HMC128G8 is a miniature double-balanced mixer in a hermetic surface mount package that can be used as an upconverter or downconverter. The device is a passive diode/balun type mixer with high dynamic range. Noise figure is essentially equal to the conversion loss. The mixer can handle larger signal levels than most active mixers due to the high third order intercept. MMIC implementation provides exceptional balance in the circuit resulting in high LO/RF and LO/ IF isolations.

MIXERS - DBL-BAL - SMT

Electrical Specifications, TA = +25° C, LO Drive = +15 dBm

Parameter

Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure SSB LO to RF Isolation LO to IF Isolation IP3 Input IP2 Input 1 dB Gain Compression Input

Min.

Typ.

DC - 2

Max.

Units

GHz dB dBm

For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at

MIXERS - DBL-BAL - SMT
v02.1105

Conversion Gain

CONVERSION GAIN dB
-5 LO= +15dBm
-10 LO= +10dBm

RF FREQUENCY GHz

Return Loss

RETURN LOSS dB
-20 0

LO RF

FREQUENCY GHz

HMC128G8

GaAs MMIC SMT DOUBLEBALANCED MIXER, - 5 GHz

Isolation
-10 RF/IF
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material Rogers 4350

The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes.

The evaluation circuit board shown is available from

Hittite upon request.

For price, delivery, and to place orders, please contact Hittite Microwave Corporation 20 Alpha Road, Chelmsford, MA 01824 Phone 978-250-3343 Fax 978-250-3373 Order On-line at

More datasheets: B88069X5040T103 | M5526 SL005 | M5526 SL002 | M5526 SL001 | B66481G0000X608 | 13219 | DFR0064 | FDI33N25TU | FJAF6810TU | CR10-1962F-T

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 104882-HMC128G8 Datasheet file may be downloaded here without warranties.

Datasheet ID: 104882-HMC128G8 517917