CWN-552-20-0022

CWN-552-20-0022 Datasheet

CWN-XXX-XX-XXXX

Part	Datasheet
CWN-552-20-0022	CWN-552-20-0022 (pdf)

Related Parts	Information
CWN-572-50-0021-204	CWN-572-50-0021-204

PDF Datasheet Preview
Headers Fully Shrouded Dimensions Right Angle Header Engineering Dimensions .31.58 TYP. .21.0504 TYP. CL This polarization rib omitted on sizes 10 and 14 V CL No.1 DIA. 2 HOLES SEE HARDWARE CHART - "Z" HARDWARE CHART TYPE THREAD 2-56 UNC 1-72 UNF 2-56 UNC HEAD HEX. RND. OPT. SECTION V-V SECTION V-V SECTION V-V DIA. 2 HOLES CENTERED BETWEEN ADJACENT FLANGES SEE HARDWARE CHART - "X" or "Y" TYP. TYP. CONTACT LENGTH DIA. ROUND CONTACT * Contact lengths and Tolerances are different for Mil-Dtl Connectors. Consult DIA. 2 HOLES DIA. HOLE TYP. for rnd. cont. or factory for specifications. DIA. HOLE TYP. for sq. cont. RECOMMENDED P.C. BOARD LAYOUT SQUARE CONTACT E 1 or 2 CLOSED LATCHES OPEN LATCHES EJECTOR LATCH OPTIONS F 1 or 2 Straight Header .31.58 TYP. .21.0504 TYP. CL This polarization rib omitted on sizes 10 and 14 V CL No.1 Specifications and Ordering Information Specifications • Contacts phosphor bronze standard • Contact Plating 30µ in. gold in mating area over 50µ in. nickel, standard 10µ gold in mating area over 50µ in. nickel, optional 50µ in. gold in mating area over 50µ in. nickel, optional • Insulator Material UL 94V-0 flame - retardant thermoplastic • Color blue • Operating Temperature -55ºC to +125ºC • Current Rating 1A maximum per contact • Dielectric Withstand Voltage greater than 500 Vdc at sea level • Insulation Resistance greater than 5 x 109 ohms • U.S. Defense Department Mil-DTL-83503/24, and 25 approved How to Order Fully Shrouded Header Connectors CWN-XXX-XX-XXXX Type of Connector 5 = polarized header 6 = non-polarized header* Pin Configuration 0=right angle solder pins. long 1=right angle solder pins. long 2=right angle wire wrap 5=straight solder pins, long 6=straight solder pins, long 7=straight wire wrap pins Latches 0=no latches 1=short latches for non-strain relief sockets 2=long latches for strain relief sockets Plating 0021=30µ in. gold in mating area over 50µ in. nickel standard 0000=10µ in. gold in mating area over 50µ in. nickel 0022=50µ in. gold in mating area over 50µ in. nickel Mil-DTL -83503 approved. CWN-5X2 versions only 0077=Duplex plated, 30µ in. gold in mating area, 100µ in. tin-lead in solder pin area, all over 50µ in. nickel Number of Contacts optional 10, 14, 16, 20, 26, 34, 40, 50 or 60 NO. CONT's HEADER DIMENSION CHART E 1 and F 1 pertains to all headers with short latches E 2 and F 2 pertains to all headers with long latches *Polarizing ribs removed • 130 James Way, Southampton, PA 18966 - 3838 • Telephone 215 355-7080 • Fax 215 355-1088 • 15

PDF Datasheet Preview

Headers Fully Shrouded

Dimensions

Right Angle Header

Engineering Dimensions
.31.58 TYP. .21.0504 TYP.

CL This polarization rib omitted on sizes 10 and 14

V CL No.1

DIA. 2 HOLES SEE HARDWARE CHART - "Z"

HARDWARE CHART

TYPE

THREAD 2-56 UNC 1-72 UNF 2-56 UNC

HEAD HEX.

RND.

OPT.

SECTION V-V

SECTION V-V

SECTION V-V

DIA. 2 HOLES

CENTERED BETWEEN ADJACENT FLANGES

SEE HARDWARE CHART - "X" or "Y"

TYP.

TYP.

CONTACT LENGTH

DIA.

ROUND CONTACT
* Contact lengths and Tolerances are
different for Mil-Dtl Connectors. Consult

DIA. 2 HOLES

DIA. HOLE TYP. for rnd. cont. or
factory for specifications.

DIA. HOLE TYP. for sq. cont.

RECOMMENDED P.C. BOARD LAYOUT

SQUARE CONTACT

E 1 or 2

CLOSED LATCHES

OPEN LATCHES EJECTOR LATCH OPTIONS

F 1 or 2

Straight Header
.31.58 TYP. .21.0504 TYP.

CL This polarization rib omitted on sizes 10 and 14

V CL No.1
Specifications and Ordering Information

Specifications
• Contacts phosphor bronze standard
• Contact Plating 30µ in. gold in mating area over 50µ in. nickel, standard 10µ gold in mating area over 50µ in. nickel, optional 50µ in. gold in mating area over 50µ in. nickel, optional
• Insulator Material UL 94V-0 flame - retardant thermoplastic
• Color blue
• Operating Temperature -55ºC to +125ºC
• Current Rating 1A maximum per contact
• Dielectric Withstand Voltage greater than 500 Vdc at
sea level
• Insulation Resistance greater than 5 x 109 ohms
• U.S. Defense Department Mil-DTL-83503/24, and
25 approved

How to Order Fully Shrouded Header Connectors

CWN-XXX-XX-XXXX

Type of Connector 5 = polarized header 6 = non-polarized header*

Pin Configuration 0=right angle solder pins.
long 1=right angle solder pins.
long 2=right angle wire wrap 5=straight solder pins,
long 6=straight solder pins,
long 7=straight wire wrap pins

Latches 0=no latches 1=short latches for non-strain
relief sockets 2=long latches for strain relief
sockets

Plating
0021=30µ in. gold in mating
area over 50µ in. nickel
standard
0000=10µ in. gold in mating
area over 50µ in. nickel
0022=50µ in. gold in mating
area over 50µ in. nickel

Mil-DTL -83503 approved.

CWN-5X2 versions only
0077=Duplex plated, 30µ in. gold
in mating area, 100µ in.
tin-lead in solder pin area,
all over 50µ in. nickel

Number of Contacts
optional
10, 14, 16, 20, 26,
34, 40, 50 or 60

NO. CONT's

HEADER DIMENSION CHART

E 1 and F 1 pertains to all headers with short latches E 2 and F 2 pertains to all headers with long latches *Polarizing ribs removed
• 130 James Way, Southampton, PA 18966 - 3838
• Telephone 215 355-7080
• Fax 215 355-1088
• 15

More datasheets: M5526 SL002 | M5526 SL001 | B66481G0000X608 | 13219 | DFR0064 | FDI33N25TU | FJAF6810TU | CR10-1962F-T | 104882-HMC128G8 | CWN-572-50-0021-204

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CWN-552-20-0022 Datasheet file may be downloaded here without warranties.

Datasheet ID: CWN-552-20-0022 507597