CTS100LVEL32NG

CTS100LVEL32NG Datasheet

CTS100LVEL32

Part	Datasheet
CTS100LVEL32NG	CTS100LVEL32NG (pdf)

Related Parts	Information
CTS100LVEL32TG	CTS100LVEL32TG
CTS100LVEL32DG	CTS100LVEL32DG

PDF Datasheet Preview
CTS100LVEL32 LVPECL Divide by 2 Divider MLP8, MSOP8, SOIC8 Not recommended for new designs  GHz Toggle Frequency  470ps Propagation Delay  Internal Input Pull-down Resistors  3.0V to 5.5V Power Supply  RoHS Compliant Pb Free Packages BLOCK DIAGRAM The CTS100LVEL32 is an integrated ÷2 divider. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flop will attain a random logic state the reset allows for the synchronization of multiple CTS100LVEL32’s in a system. The CTS100LVEL32 is a direct replacement for the On Semiconductor MC100EL/LVEL32. ENGINEERING NOTES The CTS100LVEL32 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device. For single-ended input applications, the VBB reference should be connected to one side of the differential input pair. The input signal is then fed to the other input. The VBB pin should be used only as a bias for the CTS100LVEL32 as its sink/source capability is limited. When used, the VBB pin should be bypassed to ground via a capacitor. Figure 1 - Timing Diagram North Americas +1-800-757-6686 • International +1-508-435-6831 • Asia +65-655-17551 • Specifications are subject to change without notice 1 CTS100LVEL32 LVPECL Divide by 2 Divider MLP8, MSOP8, SOIC8 Not recommended for new designs Figure 2 - Typical Large Signal Output Swing Measured with 750mV input, output terminated to VCC-2V via resistors. ELECTRICAL SPECIFICATIONS Absolute Maximum Ratings are those values beyond which device life may be impaired. Symbol VCC VI_PECL VEE VI_ECL IOUT TA TSTG ESDHBM ESDMM ESDCDM Characteristic PECL Power Supply PECL Input Voltage ECL Power Supply ECL Input Supply Output Current Operating Temperature Range Storage Temperature Range Human Body Model Electro Static Discharge Machine Model Electro Static Discharge Charged Device Model Electro Static Discharge Condition VEE = 0V VEE = 0V VCC = 0V VCC = 0V Continuous Surge - Rating 0 to + 0 to + to 0 to 0 50 100 -40 to +85 -65 to +150 2500 200 2000 Unit V °C °C V North Americas +1-800-757-6686 • International +1-508-435-6831 • Asia +65-655-17551 • Specifications are subject to change without notice 2 CTS100LVEL32 LVPECL Divide by 2 Divider MLP8, MSOP8, SOIC8 PART ORDERING INFORMATION Part Number CTS100LVEL32NG CTS100LVEL32TG CTS100LVEL32DG Package MLP8 MSOP8 SOIC8 Marking C2G / YWW HL32G / YYWW CTS100G / LVEL32 / YYWW North Americas +1-800-757-6686 • International +1-508-435-6831 • Asia +65-655-17551 • Specifications are subject to change without notice 7

PDF Datasheet Preview

CTS100LVEL32

LVPECL Divide by 2 Divider

MLP8, MSOP8, SOIC8

Not recommended for new designs
 GHz Toggle Frequency  470ps Propagation Delay
 Internal Input Pull-down Resistors
 3.0V to 5.5V Power Supply  RoHS Compliant Pb Free Packages

BLOCK DIAGRAM

The CTS100LVEL32 is an integrated ÷2 divider. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flop will attain a random logic state the reset allows for the synchronization of multiple CTS100LVEL32’s in a system.

The CTS100LVEL32 is a direct replacement for the On Semiconductor MC100EL/LVEL32.

ENGINEERING NOTES

The CTS100LVEL32 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the device. For single-ended input applications, the VBB reference should be connected to one side of the differential input pair. The input signal is then fed to the other input. The VBB pin should be used only as a bias for the CTS100LVEL32 as its sink/source capability is limited. When used, the VBB pin should be bypassed to ground via a capacitor.

Figure 1 - Timing Diagram

North Americas +1-800-757-6686
• International +1-508-435-6831
• Asia +65-655-17551
•

Specifications are subject to change without notice 1

CTS100LVEL32

LVPECL Divide by 2 Divider

MLP8, MSOP8, SOIC8

Not recommended for new designs

Figure 2 - Typical Large Signal Output Swing Measured with 750mV input, output terminated to VCC-2V via resistors.

ELECTRICAL SPECIFICATIONS

Absolute Maximum Ratings are those values beyond which device life may be impaired.

Symbol VCC

VI_PECL VEE VI_ECL

IOUT

TA TSTG ESDHBM ESDMM ESDCDM

Characteristic PECL Power Supply PECL Input Voltage ECL Power Supply

ECL Input Supply

Output Current

Operating Temperature Range Storage Temperature Range Human Body Model Electro Static Discharge Machine Model Electro Static Discharge Charged Device Model Electro Static Discharge

Condition VEE = 0V VEE = 0V VCC = 0V VCC = 0V Continuous

Surge -

Rating 0 to + 0 to + to 0 to 0
50 100 -40 to +85 -65 to +150 2500 200 2000

Unit V
°C °C V

North Americas +1-800-757-6686
• International +1-508-435-6831
• Asia +65-655-17551
•

Specifications are subject to change without notice 2

CTS100LVEL32

LVPECL Divide by 2 Divider

MLP8, MSOP8, SOIC8
PART ORDERING INFORMATION

Part Number CTS100LVEL32NG CTS100LVEL32TG CTS100LVEL32DG

Package MLP8 MSOP8 SOIC8

Marking C2G / YWW HL32G / YYWW CTS100G / LVEL32 / YYWW

North Americas +1-800-757-6686
• International +1-508-435-6831
• Asia +65-655-17551
•

Specifications are subject to change without notice 7

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CTS100LVEL32NG Datasheet file may be downloaded here without warranties.

Datasheet ID: CTS100LVEL32NG 507345