6STD09PCR99E20X

6STD09PCR99E20X Datasheet

6STD09PCR99E20X CONEC ABC

Part	Datasheet
6STD09PCR99E20X	6STD09PCR99E20X (pdf)

PDF Datasheet Preview
AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. +0,25 -0 39,4 +0,3 -0 24,99 +0,13 - 0,12 Pos. 1 Pos. 6 16,84 +0,2 - 0,05 +0,12 - 0,18 +0,3 -0 21,1 10° Ø0,6 9x c 5:1 SEALING COMPOUND D 8,26 0,22 0,03 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 5 7,9 O-RING 4-40UNC 6STD09PCR99E20X CONEC ABC SEE NOTE 14 SEE NOTE 7 9,4,6 Directive 2002/95/EC RoHS compliant THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH DO NOT ALTER CAD DRAWING BY HAND NOTES c SW 4,8 FOR WAVESOLDERING SOLDER BATH TEMPERATURE 240°C FOR 5 SEC. AND SOLDER PREHEAT 120°C FOR 120 SEC. METALSHELLS COPPER ALLOY min. 315µin TIN over 40-80µin NICKEL INSULATORS PBT GF UL 94 V-0 BLACK CONTACTS COPPER ALLOY PLATING 30µin HARD GOLD over min. 50µin NICKEL THREADED SPACER CLIPS COPPER ALLOY min. 200µin TIN over 80µin NICKEL PCB-HOLE PCB THICKNESS 1,6mm COLLARS COPPER ALLOY min. 200µin TIN over 80µin NICKEL FRAME ZINC DIE CAST NICKEL PLATED O-RING SILICON BLUE RUBBER GASKET TPE BLACK SEALING COMPOUND PUR BLUE HEXLOCKING SCREWS STAINLESS STEEL P.C.B. HOLE DRILLINGS + RECOMMENDED PANEL CUT-OUT ON SHEET 2 RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm in.LB / max. 40Ncm in.LB CONNECTOR IS PART MARKED 6STD09PCR99E20X CONEC ABC b

PDF Datasheet Preview

AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD.
+0,25 -0
39,4
+0,3 -0
24,99
+0,13 - 0,12

Pos. 1 Pos. 6
16,84
+0,2 - 0,05
+0,12 - 0,18
+0,3 -0
21,1
10°
Ø0,6 9x c
5:1 SEALING COMPOUND D
8,26
0,22 0,03

RUBBER GASKET

PLACED ON TOP SURFACE

OF MALE INSULATOR
5 7,9

O-RING 4-40UNC
6STD09PCR99E20X CONEC ABC

SEE NOTE 14

SEE NOTE 7
9,4,6

Directive 2002/95/EC RoHS compliant

THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH

DO NOT ALTER CAD DRAWING BY HAND

NOTES c

SW 4,8

FOR WAVESOLDERING SOLDER BATH TEMPERATURE 240°C FOR 5 SEC.

AND SOLDER PREHEAT 120°C FOR 120 SEC.

METALSHELLS COPPER ALLOY min. 315µin TIN over 40-80µin NICKEL

INSULATORS PBT GF UL 94 V-0 BLACK

CONTACTS COPPER ALLOY

PLATING 30µin HARD GOLD over min. 50µin NICKEL

THREADED SPACER CLIPS COPPER ALLOY min. 200µin TIN over 80µin NICKEL

PCB-HOLE PCB THICKNESS 1,6mm

COLLARS COPPER ALLOY min. 200µin TIN over 80µin NICKEL FRAME ZINC DIE CAST NICKEL PLATED O-RING SILICON BLUE RUBBER GASKET TPE BLACK SEALING COMPOUND PUR BLUE HEXLOCKING SCREWS STAINLESS STEEL P.C.B. HOLE DRILLINGS + RECOMMENDED PANEL CUT-OUT ON SHEET 2 RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm in.LB / max. 40Ncm in.LB

CONNECTOR IS PART MARKED 6STD09PCR99E20X CONEC ABC b

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 6STD09PCR99E20X Datasheet file may be downloaded here without warranties.

Datasheet ID: 6STD09PCR99E20X 506674