43-05014

43-05014 Datasheet

43-05014 SAL - 12 - 4FK5 - 9L

Part	Datasheet
43-05014	43-05014 (pdf)

PDF Datasheet Preview
60 34 n4,3 33 39 Pin-Configuration M23x1 10 17 9 19 13 21 17 Technical specification: Rated voltage: max. 30 V Current rating: Insulation resistance IEC 60512 Pollution degree IEC 60664-1 Degree of protection IEC 60529 Temperature range IEC 60664-1 Mating cycles IEC 60512-9a 2A signal contact, total ampacity max. 12A Ω >=100 M IP 67, in mated condition -20°C +80°C unmoved <=100 Materials Contact plating Contact carrier Sealing Housing: Grouting: CuSn6 Nickel, gold plated PBT, UL 94 FPM PBT, UL 94 similar to RAL 7024 Polyurethane-resin, UL 94 Port 4 YE GN + - PE 19 6 12 DO NOT ALTER CAD DRAWING BY HAND Directive 2002/95/EC RoHS compliant Part no Description: 43-05014 SAL - 12 - 4FK5 - 9L title: dim. in mm Junction box M12x1 4-way with date name connector M23x1, plastic housing tolerance of cable: drawn Fromm appd. W. Schmidt dwg no: general tolerance: 0,0,00 ± 0,50mm ± 0,25mm ± 0,10mm THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH part no:

PDF Datasheet Preview

60 34
n4,3
33 39

Pin-Configuration M23x1
10 17 9
19 13
21 17

Technical specification:

Rated voltage:
max. 30 V

Current rating:

Insulation resistance IEC 60512

Pollution degree IEC 60664-1

Degree of protection IEC 60529

Temperature range IEC 60664-1

Mating cycles IEC 60512-9a
2A signal contact, total ampacity max. 12A
Ω >=100 M

IP 67, in mated condition -20°C +80°C
unmoved <=100

Materials Contact plating Contact carrier Sealing Housing:

Grouting:

CuSn6 Nickel, gold plated PBT, UL 94 FPM PBT, UL 94 similar to RAL 7024 Polyurethane-resin, UL 94

Port
4 YE GN
+ - PE
19 6 12

DO NOT ALTER CAD DRAWING BY HAND Directive 2002/95/EC RoHS compliant

Part no Description:
43-05014 SAL - 12 - 4FK5 - 9L
title:
dim. in mm Junction box M12x1 4-way with
date name connector M23x1, plastic housing
tolerance of cable:
drawn Fromm
appd. W. Schmidt dwg no:
general tolerance:
0,0,00
± 0,50mm ± 0,25mm ± 0,10mm

THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH
part no:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 43-05014 Datasheet file may be downloaded here without warranties.

Datasheet ID: 43-05014 506662