CCM01-2251

CCM01-2251 Datasheet

CCM01 MK II

Part	Datasheet
CCM01-2251	CCM01-2251 (pdf)

Related Parts	Information
CCM01-2065	CCM01-2065

PDF Datasheet Preview
CCM01 MK II EMVTM compatible The CCM01 MK II connectors with contacts have been developed for applications where a landing contact mechanism is not required but performance and reliability are still key considerations. • Available with 8 contacts which are designed to give a consistently reliable normal force over the life of the connector. • For added reliability, the card detection switch which is normally open is sealed against dust and debris. • Available with through-hole or surface mount contact termination and its lightweight design means that the connector can be automatically pick-and-placed. • The moldings are made from high temperature thermoplastics suited for infrared and convection soldering processes. • Plastic springs in the cover give a positive feel as the card is fully inserted. In case of special version with low card insertions and withdrawal, then the CCM connector is supplied without this spring effect. • The reduced size of the contact base saves PCB space, making the connector more stable during soldering. This creates an air gap between the contacts and card entry slot which reduces the risk of an electrostatic transfer to the PCB. • By using an inlay in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating. • A chamfered opening to the card entry slot improves the card guidance into the connector. • The contact area is spooned to reduce the risk of accidental or deliberate damage and to optimize the electrical connection with the card. • Robustly formed printed circuit tails allow a coplanarity of ± mm to be maintained. Construction Contacts Plating Moldings Card detection switch Mechanical Data Number of Contacts Mechanical life Card insertion force Card extraction force Contact force Card detection switch actuation force Vibration Shock Contact Electrical Data Insulation resistance Current rating Dielectric strength Switch Electrical Data Card detection switch Contact resistance Dielectric strength Current rating Maximum power Environmental Data Operating temperature Soldering temperature Damp heat Salt mist Card detection switch Ordering Code Part Number CCM01-2064 CCM01-2065 CCM01-2251 CCM01-2253 CCM01-2255 Number of Contacts Packaging 30 per tray, 10 trays per box. Copper alloy Contact area Gold alloy inlay Terminals Tin lead 2µ min High temp. thermoplastic UL 94V-0 rated Stainless steel and copper alloy 8 100,000 cycles min 10 N max 1 N min /10 N max 4N max for CCM01-2253, 2255 N min / N max N max for actuation end travel switch actuates when card is 0,9 mm from card stop N max for complete depression Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1µs Peak value 500 m/s2 Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs 1,000 min 100 max 10 µA min / 1 A max 750 Vrms min Normally open 100 max 250 Vrms min 1 mA min / 10 mA max VA -40°C to +85°C Temperature/time acc. to CECC00802 para. Fig. 3 with peak temperature 250°C IEC 512 test number 11c 10 days IEC 512 test number 11f 96 hours Sealed against dust Termination Tail Design THT w/board lock SMT w/board lock SMT Through-hole Retention Force <10N <10N <10N <4N <4N Packaging Multiple 300 EMVTM is a trademark owned by EMVCoLLC. CCM01 MK II 55,6 REF. Dimensional Drawings CCM01-2065 0,85 1,6 PCB Thickness 0,65 1,8 55,6 ±0,2 54,3 Embossed Channel DETAIL A 9,6 REF. 4,4±0,2 3,15 4 Snap Feet 4x A B 19,12 3x 2,54 7,6 REF. Designation & Date-Code area 2x 0,3 A 0,7 CCM01- 2065 XX-XXX SEE DETAIL A 0,1 -00,1 A-A 5,8 50,2 REF. 36,2 REF.

PDF Datasheet Preview

CCM01 MK II

EMVTM compatible

The CCM01 MK II connectors with contacts have been developed for applications where a landing contact mechanism is not required but performance and reliability are still key considerations.
• Available with 8 contacts which are designed to give a consistently reliable normal force over the life of the connector.
• For added reliability, the card detection switch which is normally open is sealed against dust and debris.
• Available with through-hole or surface mount contact termination and its lightweight design means that the connector can be automatically pick-and-placed.
• The moldings are made from high temperature thermoplastics suited for infrared and convection soldering processes.
• Plastic springs in the cover give a positive feel as the card is fully inserted. In case of special version with low card insertions and withdrawal, then the CCM connector is supplied without this spring effect.
• The reduced size of the contact base saves PCB space, making the connector more stable during soldering. This creates an air gap between the contacts and card entry slot which reduces the risk of an electrostatic transfer to the PCB.
• By using an inlay in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating.
• A chamfered opening to the card entry slot improves the card guidance into the connector.
• The contact area is spooned to reduce the risk of accidental or deliberate damage and to optimize the electrical connection with the card.
• Robustly formed printed circuit tails allow a coplanarity of ± mm to be maintained.

Construction Contacts Plating

Moldings Card detection switch

Mechanical Data Number of Contacts Mechanical life Card insertion force Card extraction force

Contact force Card detection switch actuation force

Vibration

Shock

Contact Electrical Data Insulation resistance Current rating Dielectric strength

Switch Electrical Data

Card detection switch Contact resistance Dielectric strength Current rating Maximum power

Environmental Data

Operating temperature Soldering temperature

Damp heat Salt mist Card detection switch
Ordering Code Part Number

CCM01-2064 CCM01-2065 CCM01-2251 CCM01-2253 CCM01-2255

Number of Contacts

Packaging 30 per tray, 10 trays per box.

Copper alloy Contact area Gold alloy inlay Terminals Tin lead 2µ min High temp. thermoplastic UL 94V-0 rated Stainless steel and copper alloy
8 100,000 cycles min 10 N max 1 N min /10 N max 4N max for CCM01-2253, 2255 N min / N max N max for actuation end travel switch actuates when card is 0,9 mm from card stop N max for complete depression Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1µs Peak value 500 m/s2 Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs
1,000 min 100 max 10 µA min / 1 A max 750 Vrms min

Normally open 100 max 250 Vrms min 1 mA min / 10 mA max VA
-40°C to +85°C Temperature/time acc. to CECC00802 para. Fig. 3 with peak temperature 250°C IEC 512 test number 11c 10 days IEC 512 test number 11f 96 hours Sealed against dust

Termination Tail Design THT w/board lock SMT w/board lock

SMT Through-hole

Retention Force <10N <10N <10N <4N <4N

Packaging Multiple 300

EMVTM is a trademark owned by EMVCoLLC.

CCM01 MK II
55,6 REF.

Dimensional Drawings

CCM01-2065
0,85
1,6 PCB Thickness
0,65 1,8
55,6 ±0,2 54,3

Embossed Channel

DETAIL A
9,6 REF.
4,4±0,2
3,15
4 Snap Feet
4x A B
19,12
3x 2,54
7,6 REF.

Designation & Date-Code area 2x
0,3 A 0,7

CCM01- 2065

XX-XXX

SEE DETAIL A
0,1 -00,1

A-A 5,8
50,2 REF.
36,2 REF.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CCM01-2251 Datasheet file may be downloaded here without warranties.

Datasheet ID: CCM01-2251 522453