ASMT-QTC0-0xxxx PLCC-4 Black Body Surface Mount Tricolor LED
Part | Datasheet |
---|---|
![]() |
ASMT-QTC0-0AA02 (pdf) |
PDF Datasheet Preview |
---|
ASMT-QTC0-0xxxx PLCC-4 Black Body Surface Mount Tricolor LED Data Sheet This family of SMT LEDs is packaged in the industry standard PLCC-4 package with additional heat sinking capability enabling it to be driven at even higher current. These SMT LEDs have high brightness and reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under indoor full color signs application conditions. To facilitate easy pick & place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin except red color to provide close uniformity. These LEDs are compatible with reflow soldering process. Its wide viewing angle at 115° together with the built in reflector pushing up the intensity of the light output makes these LED suitable to be used in the interior electronics signs. The full black body of the LED provides extreme contrast enhancement for fine pitch and short viewing distance full color display. x Industry Standard PLCC-4 package Plastic Leaded Chip Carrier with additional heat sinking capability x High reliability LED package with silicone encapsulation x Full black LED body x High brightness using AlInGaP and InGaN dice technologies x Wide viewing angle at 115º x Compatible with reflow soldering process x JEDEC MSL 2a x Water-Resistant IPX6* per IEC 60529:2001 * The test is conducted on component level by mounting the components on PCB with proper potting to protect the leads. It is strongly recommended that customers perform necessary tests on the components for their final application. x Indoor full color display CAUTION:LEDs are Class 1C ESD sensitive. Please observe appropriate precautions during handling and processing. Please refer to Avago Application Note AN-1142 for additional details. Package Dimensions ± ± ± ± ± ± Package Marking Notes All Dimensions are in millimeters Tolerance = mm unless otherwise specified Terminal Finish Ag plating Lead Configuration 1 Cathode 2 Common Anode 3 Cathode 4 Cathode Figure Package drawing Blue Green Circuit Diagram Table Device Selection Guide Part Number ASMT-QTC0-0xxxx Color 1 AlInGaP Red Color 2 InGaN Green Color 3 InGaN Blue Color 1 - Red Color 2 - Green Color 3 - Blue Min. Iv Typ. Iv Min. Iv 20mA Typ. Iv 20mA Min. Iv 20mA Typ. Iv 20mA Bin ID mcd Bin ID mcd Bin ID mcd ASMT-QTC0-0AA02 S1 Notes The luminous intensity IV, is measured at the mechanical axis of the LED package. The actual peak of the spatial radiation pattern may not be aligned with this axis. Tolerance = ± 12 % Part Numbering System A S M T X1 X2 X3 X4 X5 Packaging Option Color Bin Selection Intensity Bin Limit Intensity Bin Selection Device Specification Configuration Table Absolute Maximum Ratings TA = 25°C |
More datasheets: CP379-A+G | HA5-1.5-OV-A+G | HA24-0.5-A+G | FDS3912 | CD4066BCMX | CD4066BCN | CD4066BCM | CD4066BCSJ | CD4066BCSJX | HFBR-59L1AL |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ASMT-QTC0-0AA02 Datasheet file may be downloaded here without warranties.