CD4066BCM

CD4066BCM Datasheet

CD4066BC Quad Bilateral Switch

Part	Datasheet
CD4066BCM	CD4066BCM (pdf)

Related Parts	Information
CD4066BCMX	CD4066BCMX
CD4066BCN	CD4066BCN
CD4066BCSJ	CD4066BCSJ
CD4066BCSJX	CD4066BCSJX

PDF Datasheet Preview
CD4066BC Quad Bilateral Switch CD4066BC Quad Bilateral Switch The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range. s Wide supply voltage range 3V to 15V s High noise immunity VDD typ. s Wide range of digital and VPEAK analog switching s “ON” resistance for 15V operation s Matched “ON” resistance = typ. over 15V signal input s “ON” resistance flat over peak-to-peak signal range s High “ON”/“OFF” 65 dB typ. output voltage ratio fis = 10 kHz, RL = 10 s Control Line Biasing: Switch On Logic 1 , VC = VDD Switch Off Logic 0 , VC = VSS s High degree linearity distortion typ. High degree linearity fis = 1 kHz, Vis = 5Vp-p, High degree linearity VDD−VSS = 10V, RL = 10 s Extremely low “OFF” nA typ. switch leakage VDD−VSS = 10V, TA = 25°C s Extremely high control input impedance s Low crosstalk −50 dB typ. between switches fis = MHz, RL = 1 s Frequency response, switch “ON” 40 MHz typ. • Analog signal switching/multiplexing • Signal gating • Squelch control • Chopper • Modulator/Demodulator • Commutating switch • Digital signal switching/multiplexing • CMOS logic implementation • Analog-to-digital/digital-to-analog conversion • Digital control of frequency, impedance, phase, and analog-signal-gain Ordering Code: Order Number Package Number Package Description CD4066BCM M14A 14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow CD4066BCSJ M14D Pb-Free 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide CD4066BCN N14A 14-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Connection Diagram Schematic Diagram 2005 Fairchild Semiconductor Corporation DS005665 CD4066BC Absolute Maximum Ratings Note 1 Note 2 Supply Voltage VDD Input Voltage VIN Storage Temperature Range TS Power Dissipation PD Dual-In-Line Small Outline Lead Temperature TL Soldering, 10 seconds −0.5V to +18V −0.5V to VCC+0.5V −65°C to +150°C 700 mW 500 mW 300°C Recommended Operating Conditions Note 2 Supply Voltage VDD Input Voltage VIN Operating Temperature Range TA 3V to 15V 0V to VDD −55°C to +125°C Note 1 “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of “Recommended Operating Conditions” and “Electrical Characteristics” provide conditions for actual device operation. Note 2 VSS = 0V unless otherwise specified. DC Electrical Characteristics Note 2 Parameter Quiescent Device Current SIGNAL INPUTS AND OUTPUTS “ON” Resistance Resistance Between Any 2 of 4 Switches Input or Output Leakage Switch “OFF” CONTROL INPUTS VILC LOW Level Input Voltage VIHC HIGH Level Input Voltage Input Current Conditions VDD = 5V VDD = 10V VDD = 15V −55°C Min Max RL = 10 to VDD − VSS/2 VC = VDD, VSS to VDD VDD = 5V

PDF Datasheet Preview

CD4066BC Quad Bilateral Switch

CD4066BC Quad Bilateral Switch

The CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BC, but has a much lower “ON” resistance, and “ON” resistance is relatively constant over the input-signal range.
s Wide supply voltage range 3V to 15V s High noise immunity VDD typ. s Wide range of digital and VPEAK
analog switching s “ON” resistance for 15V operation s Matched “ON” resistance = typ.
over 15V signal input s “ON” resistance flat over peak-to-peak signal range s High “ON”/“OFF” 65 dB typ.
output voltage ratio fis = 10 kHz, RL = 10 s Control Line Biasing:

Switch On Logic 1 , VC = VDD Switch Off Logic 0 , VC = VSS
s High degree linearity distortion typ. High degree linearity fis = 1 kHz, Vis = 5Vp-p, High degree linearity VDD−VSS = 10V, RL = 10
s Extremely low “OFF” nA typ. switch leakage VDD−VSS = 10V, TA = 25°C
s Extremely high control input impedance s Low crosstalk −50 dB typ.
between switches fis = MHz, RL = 1 s Frequency response, switch “ON” 40 MHz typ.
• Analog signal switching/multiplexing
• Signal gating
• Squelch control
• Chopper
• Modulator/Demodulator
• Commutating switch
• Digital signal switching/multiplexing
• CMOS logic implementation
• Analog-to-digital/digital-to-analog conversion
• Digital control of frequency, impedance, phase, and
analog-signal-gain
Ordering Code:

Order Number Package Number

Package Description

CD4066BCM

M14A
14-Lead Small Outline Integrated Circuit SOIC , JEDEC MS-012, Narrow

CD4066BCSJ

M14D

Pb-Free 14-Lead Small Outline Package SOP , EIAJ TYPE II, 5.3mm Wide

CD4066BCN

N14A
14-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-001, Wide
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.

Connection Diagram

Schematic Diagram
2005 Fairchild Semiconductor Corporation DS005665

CD4066BC

Absolute Maximum Ratings

Note 1 Note 2

Supply Voltage VDD Input Voltage VIN Storage Temperature Range TS Power Dissipation PD

Dual-In-Line

Small Outline

Lead Temperature TL Soldering, 10 seconds
−0.5V to +18V −0.5V to VCC+0.5V
−65°C to +150°C
700 mW 500 mW
300°C

Recommended Operating Conditions Note 2

Supply Voltage VDD Input Voltage VIN Operating Temperature Range TA
3V to 15V 0V to VDD −55°C to +125°C

Note 1 “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of “Recommended Operating Conditions” and “Electrical Characteristics” provide conditions for actual device operation.

Note 2 VSS = 0V unless otherwise specified.

DC Electrical Characteristics Note 2

Parameter

Quiescent Device Current

SIGNAL INPUTS AND OUTPUTS
“ON” Resistance

Resistance Between Any 2 of 4 Switches

Input or Output Leakage

Switch “OFF”

CONTROL INPUTS

VILC

LOW Level Input

Voltage

VIHC

HIGH Level Input Voltage

Input Current

Conditions

VDD = 5V VDD = 10V VDD = 15V
−55°C Min Max

RL = 10 to VDD − VSS/2

VC = VDD, VSS to VDD

VDD = 5V

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived CD4066BCM Datasheet file may be downloaded here without warranties.

Datasheet ID: CD4066BCM 513574