ADNS-5700-H5MD

ADNS-5700-H5MD Datasheet


ADNS-5700 Optical Mouse Sensor

Part Datasheet
ADNS-5700-H5MD ADNS-5700-H5MD ADNS-5700-H5MD (pdf)
Related Parts Information
ADNS-5700-H4PB ADNS-5700-H4PB ADNS-5700-H4PB
ADNS-5700-H5PD ADNS-5700-H5PD ADNS-5700-H5PD
ADNS-5700-H4NB ADNS-5700-H4NB ADNS-5700-H4NB
ADNS-5700-H4MB ADNS-5700-H4MB ADNS-5700-H4MB
ADNS-5700-H3PB ADNS-5700-H3PB ADNS-5700-H3PB
ADNS-5700-H3NB ADNS-5700-H3NB ADNS-5700-H3NB
ADNS-5700-H3MB ADNS-5700-H3MB ADNS-5700-H3MB
ADNS-5700-H5ND ADNS-5700-H5ND ADNS-5700-H5ND
PDF Datasheet Preview
ADNS-5700 Optical Mouse Sensor

Data Sheet

The ADNS-5700-XXXX is a compact, one chip USB optical mouse sensor for implementing a non-mechanical tracking engine for computer mice.

It is based on optical navigation technology that measures changes in position by optically acquiring sequential surface images frames and mathematically determining the direction and magnitude of movement.

The sensor is in a 18 -pin optical package that is designed to be used with the ADNS-5100-001 trim lens the ADNS5200 Clip and the LED. These parts provide a complete and compact mouse sensor. There are no moving parts, and precision optical alignment is not required, facilitating high volume assembly.

Frame rate is varied internally to the sensor to achieve tracking and speed performance, eliminating the need for the use of many registers.

Default resolution is specified as 1000 counts per inch, with rates of motion up to 30 inches per second. Buttons and tilt wheel features are also available.

A complete mouse can be built with the addition of a PC board, switches and mechanical Z-wheel, plastic case and cable.
• Optical navigation technology
• Default resolution 1000cpi, selectable resolution
800cpi or 1200cpi through different part number
• High speed motion detection up to 30 inches per
• Mice for desktop PC’s, Workstations, and portable PC’s
• Trackballs
• Integrated input devices

Theory of Operation

The ADNS-5700-XXXX is based on Optical Navigation Technology. It contains an Image Acquisition System IAS , a Digital Signal Processor DSP and USB stream output.

The IAS acquires microscopic surface images via the lens and illumination system provided by the ADNS-5100001 trim lens, ADNS-5200 clip and LED. These images are processed by the DSP to determine the direction and distance of motion. The DSP generates the x and y relative displacement values which are converted to USB motion data.

Pinout 18pin PDIP ADNS-5700-XXXX

Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
3 button H3MB, H3NB D+ DZA ZB LED_GND XY_LED VDD5 GND REG0 VDD3 NC GND OSC_IN OSC_OUT B3 B2 B1

H4MB, H4NB D+ DZA ZB LED_GND XY_LED VDD5 GND REG0 VDD3 TL TR GND OSC_IN OSC_OUT B3 B2 B1
5 button H5MD, H5ND D+ DZA ZB LED_GND XY_LED VDD5 GND REG0 VDD3 B4 OSC_IN GND OSC_OUT B3 B2 B1 B5

Pin description table

Pin Name D+

Description USB D+ line

USB D- line

ZA Optical wheel quadrature input

ZB Optical wheel quadrature input

LED_GND

LED ground

XY_LED

XY_LED Input

VDD5 GND
5 Volt Power USB VBUS System ground

ZLED

Z-Wheel LED input

REG0 / VDD3 NC
3 Volt Power VDD3 No Connect

OSC_IN

Ceramic resonator input

OSC_OUT

Ceramic resonator output

Fifth Button

Fourth Button
More datasheets: APS18SH1008G-7TM | APS18SH1008G-7TMW | AS4C64M8D3-12BIN | AS4C64M8D3-12BCN | 74ACTQ18823SSC | 74ACTQ18823MTD | 74ACTQ18823MTDX | 74ACTQ18823SSCX | ADNS-5700-H4PB | ADNS-5700-H5PD


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ADNS-5700-H5MD Datasheet file may be downloaded here without warranties.

Datasheet ID: ADNS-5700-H5MD 519991