ACPM-9420-BLK

ACPM-9420-BLK Datasheet

ACPM-9420-TR2

Part	Datasheet
ACPM-9420-BLK	ACPM-9420-BLK (pdf)

Related Parts	Information
ACPM-9420-TR2	ACPM-9420-TR2

PDF Datasheet Preview
ACPM-9420-TR2 LTE Band 20 MIPI ET PA mm x mm Power Amplifier Module The ACPM-9420 is a fully matched 10-pin surface mount power amplifier module developed for LTE Band The 2 mm x mm form-factor package is self contained, and it incorporates 50-ohm input and output matching networks. The ACPM-9420 features CoolPAM circuit technology that supports two power and high. The CoolPAM is a stage bypass technology that enhances PAE power added efficiency at low power range. The power amplifier is manufactured on an advanced InGaP HBT hetero-junction bipolar transistor MMIC microwave monolithic integrated circuit technology that offers state-of-the-art reliability, temperature stability, and ruggedness. Thin package mm typical Excellent linearity in envelope tracking mode MIPI RFFE interface Two-mode power Quiescent current control for high power mode and low power mode Ten-pin surface mounting package Internal 50-ohm matching networks for both RF input and output Separate drive and output VCC supplies Low bypass capacitance Green Lead-free and RoHS compliant Band 20 LTE Ordering Information Number of Devices Container ACPM-9420-TR2 1,000 178 mm 7 in. tape/reel Avago Technologies -1- ACPM-9420-TR2 Product Brief Package Dimensions The dimensions are in millimeters. Marking Specification Package Dimensions 111 1 Avago Technologies -2- Pin Description Pin # 1 2 3 4 5 6 7 8 9 10 Name VCC1 RFIN Vbat Vio Sdta Sclk GND NC RFOUT VCC2 Description DC supply voltage, connect to the RF stages' collector to which APT/ET is applied 0.5V~3.5V RF input DC supply voltage, connect to the bias circuitry with a fixed voltage higher than 3.0V RFFE enable RFFE data RFFE clock Ground No connection RF output DC supply voltage, connect to the RF stages' collector to which APT/ET is applied 0.5V~3.5V For product information and a complete list of distributors, please go to our web site: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. All other brand and product names may be trademarks of their respective companies. Data subject to change. Copyright 2015 Avago Technologies. All Rights Reserved. AV02-4862EN 2015-03-24

PDF Datasheet Preview

ACPM-9420-TR2

LTE Band 20 MIPI ET PA mm x mm Power Amplifier Module

The ACPM-9420 is a fully matched 10-pin surface mount power amplifier module developed for LTE Band The 2 mm x mm form-factor package is self contained, and it incorporates 50-ohm input and output matching networks.

The ACPM-9420 features CoolPAM circuit technology that supports two power and high. The CoolPAM is a stage bypass technology that enhances PAE power added efficiency at low power range.

The power amplifier is manufactured on an advanced InGaP HBT hetero-junction bipolar transistor MMIC microwave monolithic integrated circuit technology that offers state-of-the-art reliability, temperature stability, and ruggedness.

Thin package mm typical Excellent linearity in envelope tracking mode MIPI RFFE interface Two-mode power Quiescent current control for high power mode and low
power mode Ten-pin surface mounting package Internal 50-ohm matching networks for both RF input and
output Separate drive and output VCC supplies Low bypass capacitance Green Lead-free and RoHS compliant

Band 20 LTE
Ordering Information

Number of Devices

Container

ACPM-9420-TR2 1,000
178 mm 7 in. tape/reel

Avago Technologies -1-

ACPM-9420-TR2 Product Brief

Package Dimensions

The dimensions are in millimeters.

Marking Specification

Package Dimensions
111 1

Avago Technologies -2-

Pin Description

Pin # 1 2 3 4 5 6 7 8 9 10

Name VCC1 RFIN Vbat Vio Sdta Sclk GND NC RFOUT VCC2

Description DC supply voltage, connect to the RF stages' collector to which APT/ET is applied 0.5V~3.5V RF input DC supply voltage, connect to the bias circuitry with a fixed voltage higher than 3.0V RFFE enable RFFE data RFFE clock Ground No connection RF output DC supply voltage, connect to the RF stages' collector to which APT/ET is applied 0.5V~3.5V

For product information and a complete list of distributors, please go to our web site:

Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. All other brand and product names may be trademarks of their respective companies.

Data subject to change. Copyright 2015 Avago Technologies. All Rights Reserved.

AV02-4862EN 2015-03-24

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ACPM-9420-BLK Datasheet file may be downloaded here without warranties.

Datasheet ID: ACPM-9420-BLK 519915