GX01ZD103PA7D

GX01ZD103PA7D Datasheet

GX01 Series Insertion Loss S21

Part	Datasheet
GX01ZD103PA7D	GX01ZD103PA7D (pdf)

Related Parts	Information
GX01ZD103PA7D-1000	GX01ZD103PA7D-1000
GX01ZD103PATD	GX01ZD103PATD
GX01ZD103PA7D-500	GX01ZD103PA7D-500

PDF Datasheet Preview
GX Series Ultra Broad Band Capacitor ADVANTAGES • Ultra-Broadband performance • Ultra-Low Insertion Loss • X5R & X7S Characteristics • Excellent Return Loss • Semi-Conductor Data Communications Customers • Receiver Optical Sub-Assemblies • Transimpedance Amplifier Customers • Test Equipment Manufactures The GX Series was developed specifically to address DC Blocking issues from 160KHz -3dB roll-off to 40GHz. Most applications will experience resonance-free insertion loss of <0.5dB thru at least 40GHz. Insertion loss at higher frequencies is in part dependent on installation parameters. Using AVX’s patented precision thin film termination process, the part is designed to be completely orientation insensitive with a standard EIA 0201 footprint to minimize board space requirements. Both Ni/Sn and Ni/Au terminations are available to cover a wide range of attachment processes. All GX parts are RoHS compliant. Au terminated units are wire bondable. Users may, therefore, find these devices equally useful in bypass applications when wire bonding is a necessary part of the manufacturing process. More information can be obtained by contacting the factory or your local AVX representative. Magnitude dB Magnitude dB GX01 Series Insertion Loss S21 Typical Frequency GHz GX01 Series Return Loss S11 Typical Frequency GHz Test Parameters: All testing done on 10-mil thick Rogers R03006 Microstrip board, with device under test subtending a 10 mil gap in a mil wide center trace nominal 50 Ohm characteristic impedance MECHANICAL SPECIFICATIONS ± ± ± ± mm inches GX Series Ultra Broad Band Capacitor ELECTRICAL SPECIFICATIONS Capacitance Voltage Rating/Operating Temperature Dielectric Withstanding Voltage Insulation Resistance Temperature Coefficient uF GMV 10 VDC 85°C VDC 125ºC 250% WVDC 10,000 Meg Ohms 25°C 1,000 Meg Ohms 125°C 10 VDC X5R ±15% VDC X7S ±22% GX 01 Style Case Size 01 = 0201 Voltage/Dielectric ZD = 10Vdc/X5R 6.3Vdc/X7S = Under development Capacitance 103 = 0.01uF EIA Cap Code in pF Tolerance P = +100% Failure Rate A = Std Termination T = Ni-Sn Standard

PDF Datasheet Preview

GX Series

Ultra Broad Band Capacitor

ADVANTAGES
• Ultra-Broadband performance
• Ultra-Low Insertion Loss
• X5R & X7S Characteristics
• Excellent Return Loss
• Semi-Conductor Data Communications Customers
• Receiver Optical Sub-Assemblies
• Transimpedance Amplifier

Customers
• Test Equipment Manufactures

The GX Series was developed specifically to address DC Blocking issues from 160KHz -3dB roll-off to 40GHz. Most applications will experience resonance-free insertion loss of <0.5dB thru at least 40GHz. Insertion loss at higher frequencies is in part dependent on installation parameters. Using AVX’s patented precision thin film termination process, the part is designed to be completely orientation insensitive with a standard EIA 0201 footprint to minimize board space requirements. Both

Ni/Sn and Ni/Au terminations are available to cover a wide range of attachment processes. All GX parts are RoHS compliant.

Au terminated units are wire bondable. Users may, therefore, find these devices equally useful in bypass applications when wire bonding is a necessary part of the manufacturing process.

More information can be obtained by contacting the factory or your local AVX representative.

Magnitude dB Magnitude dB

GX01 Series Insertion Loss S21

Typical

Frequency GHz

GX01 Series Return Loss S11

Typical

Frequency GHz

Test Parameters:

All testing done on 10-mil thick Rogers R03006 Microstrip board, with device under test subtending a 10 mil gap in a mil wide center trace nominal 50 Ohm characteristic impedance

MECHANICAL SPECIFICATIONS
± ±
± ±
mm inches

GX Series

Ultra Broad Band Capacitor

ELECTRICAL SPECIFICATIONS

Capacitance Voltage Rating/Operating Temperature Dielectric Withstanding Voltage Insulation Resistance Temperature Coefficient
uF GMV 10 VDC 85°C VDC 125ºC 250% WVDC 10,000 Meg Ohms 25°C 1,000 Meg Ohms 125°C 10 VDC X5R ±15% VDC X7S ±22%

GX 01

Style

Case Size 01 = 0201

Voltage/Dielectric ZD = 10Vdc/X5R
6.3Vdc/X7S
= Under development

Capacitance 103 = 0.01uF EIA Cap Code
in pF

Tolerance P = +100%

Failure Rate A = Std

Termination T = Ni-Sn

Standard

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived GX01ZD103PA7D Datasheet file may be downloaded here without warranties.

Datasheet ID: GX01ZD103PA7D 521390