BXB150-24S3V3FLTJ

BXB150-24S3V3FLTJ Datasheet

BXB150 Series

Part	Datasheet
BXB150-24S3V3FLTJ	BXB150-24S3V3FLTJ (pdf)

PDF Datasheet Preview
Embedded Power for Business-Critical Continuity BXB150 Series Single output Total Power Input Voltage: # of Outputs: 150 W 18 - 36 Vdc 36 - 75 Vdc Single Special Features • Industry standard footprint MTBF million hours Bellcore 332 • Input voltage to ETS300-132-2 • Adjustable output voltage • No minimum load required • Separate case ground pin • 2:1 input range for battery powered applications • Undervoltage lockout UVLO • UL, VDE and CSA safety approvals • Available RoHS compliant • 2 year warranty Electrical Specifications Output Voltage adjustability Setpoint accuracy Line regulation Load regulation Minimum load Overshoot Low line to high line Full load to min. load At turn on and turn-off Undershoot Ripple and noise 5 Hz - 20 MHz see note 1 V and 5 V 12V and 15 V Temperature coefficient Transient response see note 2 Remote sense 60% to 110% 0% None None 75 mV pk-pk, 20 mV rms 100 mV pk-pk, 30 mV rms / ºC max. deviation 170 usrecovery to within Vdc transmission line drop compensation Safety VDE0805/EN60950/IEC950 UL1950 CSA C22.2 No. 950 Embedded Power for Business-Critical Continuity Input voltage range 24 Vin nominal 48 Vin nominal 18 - 36 Vdc 36 - 75 Vdc Input current No load Remote OFF 130 mA max. 20 mA max. Input current max. See note 4 Input reflected ripple 24 Vin 48 Vin See note 6 Ordering Information Output Power Max. Input Voltage 100 W 18 - 36 Vdc 100 W 150 W 150 W 36 - 75 Vdc 36 - 75 Vdc 36 - 75 Vdc 150 W 36 - 75 Vdc Output Voltage V 5V 12 V 15 V Output Current Min. Output Current Max. 30 A 30 A 30 A 10 A Efficiency Typ. 77% 79% 84% 84% 88% Regulation Line Load Model Number BXB150-24S3V3FLTJ BXB150-48S3V3FLTJ BXB150-48S05FLTJ BXB150-48S12FLTJ BXB150-48S15FLTJ Notes 1 Measured with 10 uF tantalum capacitor and 1 uF ceramic capacitor across output. 2 di/dt = A/1 us, Vin = 48 Vdc, Tc = 25 °C, load change = lo max. to lo max. and lo max. to lo max. 3 Units should be characterised within systems. External components required. 4 Input fusing is recommended based on surge current and maximum input current. 5 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 6 Simulated source impedance of 12 uH. 12 uH inductor in series with +Vin. 7 Active high remote ON/OFF option is available standard product is active low , designate with the suffix ‘FHT’ e.g. BXB150-48S05FHTJ. Consult factory for further details and options. 8 Start-up into resistive load. 9 The ‘J’ suffix indicates that these parts are Pb-free RoHS 6/6 compliant. TSE RoHS 5/6 non Pb-free compliant versions may be available on special request, please contact your local sales representative for details. 10 NOTICE Some models do not support all options. Please contact your local sales representative or use the on-line model number search tool at to find a suitable alternative. External Output Trimming Output can be externally trimmed by using the method shown. TRIM RT2 TRIM DOWN Pin connections Pin Number Function +Vin Remote ON/OFF Case -Vin -Vout -Sense Trim

PDF Datasheet Preview

Embedded Power for Business-Critical Continuity

BXB150 Series

Single output

Total Power Input Voltage:
# of Outputs:
150 W 18 - 36 Vdc 36 - 75 Vdc Single

Special Features
• Industry standard footprint MTBF million hours Bellcore 332
• Input voltage to ETS300-132-2
• Adjustable output voltage
• No minimum load required
• Separate case ground pin
• 2:1 input range for battery
powered applications
• Undervoltage lockout UVLO
• UL, VDE and CSA
safety approvals
• Available RoHS compliant
• 2 year warranty

Electrical Specifications

Output

Voltage adjustability Setpoint accuracy Line regulation Load regulation Minimum load Overshoot

Low line to high line Full load to min. load

At turn on and turn-off

Undershoot

Ripple and noise 5 Hz - 20 MHz see note 1

V and 5 V 12V and 15 V

Temperature coefficient Transient response see note 2

Remote sense
60% to 110%
0% None

None
75 mV pk-pk, 20 mV rms
100 mV pk-pk, 30 mV rms
/ ºC
max. deviation 170 usrecovery to within

Vdc transmission line drop compensation

Safety

VDE0805/EN60950/IEC950 UL1950 CSA C22.2 No. 950

Embedded Power for Business-Critical Continuity

Input voltage range
24 Vin nominal 48 Vin nominal
18 - 36 Vdc 36 - 75 Vdc

Input current

No load Remote OFF
130 mA max. 20 mA max.

Input current max. See note 4

Input reflected ripple
24 Vin 48 Vin See note 6
Ordering Information

Output Power Max.

Input Voltage
100 W
18 - 36 Vdc
100 W 150 W 150 W
36 - 75 Vdc 36 - 75 Vdc 36 - 75 Vdc
150 W
36 - 75 Vdc

Output Voltage

V 5V 12 V 15 V

Output Current Min.

Output Current Max.
30 A 30 A 30 A 10 A

Efficiency Typ.
77% 79% 84% 84% 88%

Regulation

Line

Load

Model Number

BXB150-24S3V3FLTJ BXB150-48S3V3FLTJ BXB150-48S05FLTJ BXB150-48S12FLTJ BXB150-48S15FLTJ

Notes
1 Measured with 10 uF tantalum capacitor and 1 uF ceramic capacitor across output.
2 di/dt = A/1 us, Vin = 48 Vdc, Tc = 25 °C, load change = lo max. to lo max. and lo max. to lo max.
3 Units should be characterised within systems. External components required. 4 Input fusing is recommended based on surge current and maximum input
current. 5 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product. 6 Simulated source impedance of 12 uH. 12 uH inductor in series with +Vin. 7 Active high remote ON/OFF option is available standard product is active low ,
designate with the suffix ‘FHT’ e.g. BXB150-48S05FHTJ. Consult factory for further details and options. 8 Start-up into resistive load. 9 The ‘J’ suffix indicates that these parts are Pb-free RoHS 6/6 compliant. TSE RoHS 5/6 non Pb-free compliant versions may be available on special request, please contact your local sales representative for details. 10 NOTICE Some models do not support all options. Please contact your local sales representative or use the on-line model number search tool at to find a suitable alternative.

External Output Trimming Output can be externally trimmed by using the method shown.

TRIM

RT2 TRIM

DOWN

Pin connections

Pin Number Function
+Vin

Remote ON/OFF

Case
-Vin
-Vout
-Sense

Trim

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived BXB150-24S3V3FLTJ Datasheet file may be downloaded here without warranties.

Datasheet ID: BXB150-24S3V3FLTJ 511085