ATH22
Part | Datasheet |
---|---|
![]() |
ATH18K12-9SJ (pdf) |
Related Parts | Information |
---|---|
![]() |
ATH22T05-9SJ |
![]() |
ATH22T033-9SJ |
PDF Datasheet Preview |
---|
22Amps ATH22 Total Power Input Voltages No. of Outputs: 99W 3.3V, 5V, 12V Single Electrical Specs Input Input Range - 3.6V - 5.5V - 13.2V Under Voltage Lockout with hysterisis Efficiency up to 96% Special Features • Point-of-Load Alliance product • Open frame TH or SMT termination • Auto-Track Sequencing • Margin Up/Down Controls • Remote sense compensation • Output Voltage Adjust Resistor Programming • Under Voltage Lockout • Pre-Biased start-up2 • Output On/Off Inhibit • -40°C to +85°C Ambient Air Operation • Non Isolated module Output Overall Regulation Noise/Ripple Remote sense Transient Response Over Current Protection 1% of Vo Typ 32mV Typ 2.5Vo and below 1% Vo Typ Vo > 2.5V Up to 300mV max 130mV typical for 3.3Vo for 50% to 100% IO,MAX step change 70us recovery time Co = 330uF 175% IO,MAX typical autorecovery Control Inhibit On/Off Output Voltage Adjust Output Margin Output Auto-Track Positive Enable Logic See output range on page 2 ±5% VO,NOM See Note 5 Environmental Ambient air operating temperature range -40°C to +85°C Storage temperature -40°C to +125°C Calculated MTBF > 4.9M hours Specifications subject to change without notice Safety UL,cUL 60950 Recognition Pending EN 60950 through TUV or VDE Pending North America USA 1-888-41-ASTEC Europe UK 44 1384 842-211Asia HK 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone 760-930-4600 Facsimile 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone 44 1384 842-211 Facsimile 44 1384 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone 852-2437-9662 Facsimile 852-2402-4426 Ordering Information Input Voltage Output Voltage Output3 Current 3.0V to 3.6V 4.5V to 5.5V 10.8V to 13.2V 0.8V to 2.5V 0.8V to 3.6V 1.2V to 5.5V OPTIONS “-9J” - Output Trim, TH termination, Tray Packaging “-9SJ” - Output Trim, SMT termination, Tray Packaging “-9S” - Output Trim, SMT Ternination, T&R packaging Efficiency4 95% 96% 95% Model Number ATH22T033-9 S J ATH22T05-9 S J ATH18K12-9 S J Pin Assignments Single Output PINS Inhibit Vo Adjust Vo Sense Vout Track Margin Down 9 Margin Up 10 Notes Nominal values apply with sense pins connected to +Vout and Ground Return with other control pins unconnected. Pre-Bias startup capability exists for 3.3Vin and 5Vin devices. Output derating applies at elevated ambient tempe rature. Typical efficiency taken at 10A load, 2.5V output 3.3Vin device 10A load, 3.3V output 5Vin device 10Aload, 5V output 12Vin device . Consult the technical reference notes when available. Mechanical Dimensions are nominal values. Auto-Track is a trademark of Texas Instruments. Specification subject to change without notice. Through-hole and SMT Outline [in mm ] |
More datasheets: CY7C1414JV18-267BZC | CY7C1425JV18-250BZC | CY7C1425JV18-267BZI | CY7C1414JV18-250BZXC | CY7C1425JV18-250BZI | CY7C1425JV18-250BZXC | AT89C5132-ROTUL | AT89C5132-RORUL | AT89C5132-ROTIL | ATH22T05-9SJ |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived ATH18K12-9SJ Datasheet file may be downloaded here without warranties.