M10372-A1

M10372-A1 Datasheet

GPS M10372 RF antenna module

Part	Datasheet
M10372-A1	M10372-A1 (pdf)

Related Parts	Information
M10372-U1	M10372-U1

PDF Datasheet Preview
GPS M10372 RF antenna module GPS M10372 RF Antenna Module Antenova’s GPS M10372 RF Antenna Module is a single package solution to combine RF and antenna on the same module. The M10372 is a highly integrated GPS RF Antenna Module suitable for L1-band GPS and A-GPS systems. The device is based on the high performance CSR SiRFstarIV GPS architecture combined with Antenova’s high efficiency antenna technology, and is designed to provide an optimal radiation pattern for GPS reception. All front-end and receiver components are contained in a single package laminate base module, providing a complete GPS receiver for optimum performance. The M10372 operates on a single 1.8V positive bias supply with low power consumption and available low power modes for further power savings. The M10372 is supported by SiRF stand alone software and is compatible with UART, SPI and I2C host processor interfaces. Custom versions of M10372 can also incorporate an antenna switch for optional external active antenna connection. Providing a true drop in solution with the antenna and RF in a single package, GPS M10372 offers ease of integration and shorter design cycles for faster time to market. Applications • Personal Navigation Devices PNDs • Portable Media Players PMPs • Asset Tracking / Personal Safety • Ultra Mobile Devices UMDs Features • Low cost single package RF Antenna Module • CSR SiRFstarIV GPS Chipset Architecture • Low 5mm height for thin devices • Low current consumption • Optional external antenna support • Resistant to de-tuning Antennas for Wireless M2M Applications 28mm 13mm Bottom Component Side View w/shield can Top Antenna Side View Typical Planar Mount Side view Typical Placement on PCB Part No. M10372 GPS M10372 RF antenna module electrical mechanical Frequency: 1575 MHz Dimensions : Supply Voltage 1.8V Supply Current: 30mA Mounting: Hibernate Current: 30 µA COM Interface: UART / SPI / I2C Connector: Output Protocol: SiRF Binary / NMEA 0183 Operating Temperature -30°C to +85°C Groundplane: 28 x 13 x 5mm Planar mount / low profile 30pin board-to-board 40 x 30mm min Typical RF Antenna Module Placement Front View Back View Side View Typical Sensitivity Pattern Note Radiation pattern measured on Antenova M2M’s standard test board. Tuning may be needed in product integration to adjust radiation pattern.

PDF Datasheet Preview

GPS M10372 RF antenna module

GPS M10372 RF Antenna Module

Antenova’s GPS M10372 RF Antenna Module is a single package solution to combine RF and antenna on the same module. The M10372 is a highly integrated GPS RF Antenna Module suitable for L1-band GPS and A-GPS systems. The device is based on the high performance CSR SiRFstarIV GPS architecture combined with Antenova’s high efficiency antenna technology, and is designed to provide an optimal radiation pattern for GPS reception.

All front-end and receiver components are contained in a single package laminate base module, providing a complete GPS receiver for optimum performance. The M10372 operates on a single 1.8V positive bias supply with low power consumption and available low power modes for further power savings. The M10372 is supported by SiRF stand alone software and is compatible with UART, SPI and I2C host processor interfaces. Custom versions of M10372 can also incorporate an antenna switch for optional external active antenna connection.

Providing a true drop in solution with the antenna and RF in a single package, GPS M10372 offers ease of integration and shorter design cycles for faster time to market.

Applications
• Personal Navigation Devices PNDs
• Portable Media Players PMPs
• Asset Tracking / Personal Safety
• Ultra Mobile Devices UMDs

Features
• Low cost single package RF Antenna Module
• CSR SiRFstarIV GPS Chipset Architecture
• Low 5mm height for thin devices
• Low current consumption
• Optional external antenna support
• Resistant to de-tuning

Antennas for Wireless M2M Applications
28mm
13mm

Bottom Component Side View
w/shield can

Top Antenna Side View

Typical Planar Mount

Side view

Typical Placement on PCB

Part No. M10372

GPS M10372 RF antenna module
electrical mechanical

Frequency:
1575 MHz

Dimensions :

Supply Voltage
1.8V

Supply Current:
30mA

Mounting:

Hibernate Current:
30 µA

COM Interface:

UART / SPI / I2C

Connector:

Output Protocol:

SiRF Binary / NMEA 0183

Operating Temperature -30°C to +85°C

Groundplane:
28 x 13 x 5mm Planar mount / low profile 30pin board-to-board 40 x 30mm min

Typical RF Antenna Module Placement

Front View Back View Side View

Typical Sensitivity Pattern

Note Radiation pattern measured on Antenova M2M’s standard test board. Tuning may be needed in product integration to adjust radiation pattern.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived M10372-A1 Datasheet file may be downloaded here without warranties.

Datasheet ID: M10372-A1 518048