AS13985 - Evaluation Board
Part | Datasheet |
---|---|
![]() |
AS13985F26_EK_ST (pdf) |
Related Parts | Information |
---|---|
![]() |
AS13985F30_EK_ST |
![]() |
AS13985F29_EK_ST |
![]() |
AS13985F28_EK_ST |
![]() |
AS13985F27_EK_ST |
![]() |
AS13985F18_EK_ST |
![]() |
AS13985F12_EK_ST |
![]() |
AS13985F33_EK_ST |
PDF Datasheet Preview |
---|
AS13985 - Evaluation Board Application Note AS13985 Evaluation Board Application Note AS13985 - Evaluation Board Application Note Board Description Figure 1 Board Description - Connector Figure 2 Board Description Measurement Points Connector Description Label Jumper Vin GND Power Supply Connectors for Vin and Ground. Vin / GND EN Enable Jumper Vout Power Output Connector Out, GND Power Output and Ground Connector Measurement Points Info +2.5V to +5.5V 1/ON = The AS13985 is on. 0/OFF = The AS13985 is off and the current into Vin is typ . Regulated Output Voltage Additional Connectors to apply a load Label F G H I J Jumper EN Vin GND Vout U1GND Enable Pin Connector1 Power Supply Connectors for Vin and Ground. Power Output Connector IQ Quiescent Current Connector2 Info Measurement Points Operational sequence If not present get the datasheet for the AS13985 from Drive the IC on the evaluation board only with the recommended settings and values as described in the datasheet. Connect a +2.5V to +5.5V power supply Vin “A” and GND “B” . Perform measurements at the measurement points. Have fun using the Evaluation Board. If there are questions do not hesitate to contact us. See contact information at the end of the application note. 1 If the EN measurement point F is used as a connector, be sure that the EN jumper C is completely removed. Otherwise the supply source could be damage through a short circuit. 2 For normal operation jumper J has to be always set. For the measurement of the quiescent current remove the jumper and connect an analyzer here. |
More datasheets: 335104-13-0100 | 335104-13-0050 | 335104-13-0250 | FDU8878 | FDD8878 | 624 | AS13985F30_EK_ST | AS13985F29_EK_ST | AS13985F28_EK_ST | AS13985F27_EK_ST |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS13985F26_EK_ST Datasheet file may be downloaded here without warranties.