AS1150

AS1150 Datasheet

AS1150, AS1151

Part	Datasheet
AS1150	AS1150 (pdf)

Related Parts	Information
AS1151	AS1151
AS1150-T	AS1150-T
AS1151-T	AS1151-T

PDF Datasheet Preview
AS1150, AS1151 Quad LVDS Receivers Data Sheet 1 General Description The AS1150 and AS1151 are quad flow-through LVDS low-voltage differential signaling receivers which accept LVDS differential inputs and convert them to LVCMOS outputs. The receivers are perfect for lowpower low-noise applications requiring high signaling rates and reduced EMI emissions. The devices are guaranteed to receive data at speeds up to 500Mbps 250MHz over controlled impedance media of approximately Supported transmission media are PCB traces, backplanes, and cables. The AS1150 uses high impedance inputs and requires an external termination resistor when used in a point-topoint connection. The AS1151 features integrated parallel termination resistors nominally 107Ω , which eliminate the requirement for discrete termination resistors, and reduce stub lengths. The integrated failsafe feature sets the output high if the inputs are open, undriven and terminated, or undriven and shorted. Enable inputs EN and ENn internally pulled down to GND control the high-impedance output and are common to all four receivers. All inputs conform to the ANSI TIA/EIA- 644 LVDS standards. Flow-through pinout simplifies PC board layout and reduces crosstalk by separating the LVDS inputs and LVCMOS outputs. The devices are available in a 16-pin TSSOP package. Figure Block Diagrams IN1+ IN1- Rx OUT1 IN2+ IN2- Rx OUT2 IN3+ IN3- Rx OUT3 IN4+ IN4EN Rx OUT4 AS1150 2 Key Features ! Flow-Through Pinout ! Guaranteed 500Mbps Data Rate ! 300ps Pulse Skew Max ! Conform to ANSI TIA/EIA-644 LVDS Standards ! Single +3.3V Supply ! Operating Temperature Range -40 to +85ºC ! Failsafe Circuit ! Integrated Termination AS1151 ! 16-pin TSSOP Package 3 Applications The devices are ideal for digital copiers, laser printers, cellular phone base stations, add/drop muxes, digital cross-connects, dslams, network switches/routers, backplane interconnect, clock distribution computers, intelligent instruments, controllers, critical microprocessors and microcontrollers, power monitoring, and portable/battery-powered equipment. IN1+ 107Ω IN1- IN2+ 107Ω IN2- IN3+ 107Ω IN3- IN4+ 107Ω IN4- AS1151 OUT1 OUT2 OUT3 OUT4 1 - 15 AS1150/AS1151 Data Sheet - Pinout 4 Pinout Pin Assignments Figure Pin Assignments Top View IN1- 1 IN1+ 2 IN2+ 3 IN2- 4 IN3- 5 IN3+ 6 IN4+ 7 IN4- 8 AS1150 AS1151 Data Sheet - Ordering Information 11 Ordering Information Model AS1150-T AS1151 AS1151-T Quad low-voltage differential signaling receiver Quad low-voltage differential signaling receiver Quad low-voltage differential signaling receiver with integrated termination Quad low-voltage differential signaling receiver with integrated termination Package Type 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP Delivery Form Tubes Tape and Reel Tubes Tape and Reel 14 - 15 AS1150/AS1151 Data Sheet Copyrights Copyright 1997-2007, austriamicrosystems AG, Schloss Premstaetten, 8141 Unterpremstaetten, Austria-Europe. Trademarks Registered All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. All products and companies mentioned are trademarks or registered trademarks of their respective companies. Disclaimer Devices sold by austriamicrosystems AG are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. austriamicrosystems AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with austriamicrosystems AG for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or lifesustaining equipment are specifically not recommended without additional processing by austriamicrosystems AG for each application. For shipments of less than 100 parts the manufacturing flow might show deviations from the standard production flow, such as test flow or test location. The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However, austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems AG rendering of technical or other services. Contact Information Headquarters austriamicrosystems AG A-8141 Schloss Premstaetten, Austria Tel +43 0 3136 500 0 Fax +43 0 3136 525 01 For Sales Offices, Distributors and Representatives, please visit: 15 - 15

PDF Datasheet Preview

AS1150, AS1151

Quad LVDS Receivers

Data Sheet
1 General Description

The AS1150 and AS1151 are quad flow-through LVDS low-voltage differential signaling receivers which accept LVDS differential inputs and convert them to LVCMOS outputs. The receivers are perfect for lowpower low-noise applications requiring high signaling rates and reduced EMI emissions.

The devices are guaranteed to receive data at speeds up to 500Mbps 250MHz over controlled impedance media of approximately Supported transmission media are PCB traces, backplanes, and cables.

The AS1150 uses high impedance inputs and requires an external termination resistor when used in a point-topoint connection. The AS1151 features integrated parallel termination resistors nominally 107Ω , which eliminate the requirement for discrete termination resistors, and reduce stub lengths.

The integrated failsafe feature sets the output high if the inputs are open, undriven and terminated, or undriven and shorted. Enable inputs EN and ENn internally pulled down to GND control the high-impedance output and are common to all four receivers. All inputs conform to the ANSI TIA/EIA- 644 LVDS standards. Flow-through pinout simplifies PC board layout and reduces crosstalk by separating the LVDS inputs and LVCMOS outputs.

The devices are available in a 16-pin TSSOP package.

Figure Block Diagrams

IN1+ IN1-

Rx OUT1

IN2+ IN2-

Rx OUT2

IN3+ IN3-

Rx OUT3

IN4+ IN4EN

Rx OUT4

AS1150
2 Key Features
! Flow-Through Pinout ! Guaranteed 500Mbps Data Rate ! 300ps Pulse Skew Max ! Conform to ANSI TIA/EIA-644 LVDS Standards ! Single +3.3V Supply ! Operating Temperature Range -40 to +85ºC ! Failsafe Circuit ! Integrated Termination AS1151 ! 16-pin TSSOP Package
3 Applications

The devices are ideal for digital copiers, laser printers, cellular phone base stations, add/drop muxes, digital cross-connects, dslams, network switches/routers, backplane interconnect, clock distribution computers, intelligent instruments, controllers, critical microprocessors and microcontrollers, power monitoring, and portable/battery-powered equipment.

IN1+ 107Ω

IN1-

IN2+ 107Ω

IN2-

IN3+ 107Ω

IN3-

IN4+ 107Ω

IN4-

AS1151

OUT1 OUT2 OUT3 OUT4
1 - 15

AS1150/AS1151

Data Sheet - Pinout
4 Pinout

Pin Assignments

Figure Pin Assignments Top View

IN1- 1 IN1+ 2 IN2+ 3 IN2- 4 IN3- 5 IN3+ 6 IN4+ 7 IN4- 8

AS1150 AS1151
Data Sheet - Ordering Information
11 Ordering Information

Model AS1150-T AS1151

AS1151-T

Quad low-voltage differential signaling receiver

Quad low-voltage differential signaling receiver

Quad low-voltage differential signaling receiver with integrated termination

Quad low-voltage differential signaling receiver with integrated termination

Package Type 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
16-pin TSSOP

Delivery Form Tubes

Tape and Reel Tubes

Tape and Reel
14 - 15

AS1150/AS1151

Data Sheet

Copyrights

Copyright 1997-2007, austriamicrosystems AG, Schloss Premstaetten, 8141 Unterpremstaetten, Austria-Europe. Trademarks Registered All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. All products and companies mentioned are trademarks or registered trademarks of their respective companies.

Disclaimer

Devices sold by austriamicrosystems AG are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. austriamicrosystems AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with austriamicrosystems AG for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or lifesustaining equipment are specifically not recommended without additional processing by austriamicrosystems AG for each application. For shipments of less than 100 parts the manufacturing flow might show deviations from the standard production flow, such as test flow or test location. The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However, austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems AG rendering of technical or other services.

Contact Information

Headquarters austriamicrosystems AG A-8141 Schloss Premstaetten, Austria Tel +43 0 3136 500 0 Fax +43 0 3136 525 01

For Sales Offices, Distributors and Representatives, please visit:
15 - 15

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived AS1150 Datasheet file may be downloaded here without warranties.

Datasheet ID: AS1150 519574