IRKU105/12A

IRKU105/12A Datasheet

IRKU/V105 SERIES

Part	Datasheet
IRKU105/12A	IRKU105/12A (pdf)

Related Parts	Information
IRKU105/08A	IRKU105/08A
IRKU105/04A	IRKU105/04A

PDF Datasheet Preview
THYRISTOR/ THYRISTOR IRKU/V105 SERIES ADD-A-pakTM GEN V Power Modules High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded 105 A Mechanical Description The Generation V of Add-A-pak module combine the excellent thermal performance obtained by the usage of Direct Bonded Copper substrate with superior mechanical ruggedness, thanks to the insertion of a solid Copper baseplate at the bottom side of the device. The Cu baseplate allow an easier mounting on the majority of heatsink with increased tolerance of surface roughness and improve thermal spread. The Generation V of AAP module is manufactured without hard mold, eliminating in this way any possible direct stress on the leads. The electrical terminals are secured against axial pullout they are fixed to the module housing via a click-stop feature already tested and proved as reliable on other IR modules. Electrical Description These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger. Major Ratings and Characteristics Parameters IRKU/V105 Units 85°C IT RMS ITSM 50Hz 60Hz I2t 50Hz 60Hz 105 165 1785 1870 A KA2s VRRM range 400 to 1600 TSTG - 40 to 125 - 40 to130 IRKU/V105 Series ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code VRRM , maximum repetitive VRSM , maximum non-repetitive VDRM , max. repetitive peak off-state voltage, gate open circuit IRKU/V105 1200 1300 1200 1600 1700 1600 IRRM IDRM 130°C mA Ordering Information Table Device Code IRK U 105 / 16 A S90 IRK.106 types With no auxiliary cathode 1 - Module type 2 - Circuit configuration See Circuit Configuration table below 3 - Current code * * 4 - Voltage code See Voltage Ratings table 5 - A Gen V 6 - dv/dt code S90 = dv/dt 1000 V/µs No letter = dv/dt 500 Vµs Outline Table * * Available with no auxiliary cathode. To specify change 105 to 106 e.g. IRKU106/16A etc. IRKU Dimensions are in millimeters and [inches] IRKV G1 K1 K2 G2 4 5 7 6 G1 K1 K2 G2 4 5 7 6 NOTE To order the Optional Hardware see Bulletin I27900 4 Maximum Allowable Case Temperature °C 130 IRK.105.. Series R thJC DC = K/W 110 Conduction Angle 30° 60° 90° 120° 180° 70 0 20 40 60 80 100 120 Average On-state Current A Fig. 1 - Current Ratings Characteristics 160 180° 120° 90° 60° 30° 100 RMS Limit Conduction Angle 40 IRK.105.. Series Per Junction T J = 130°C 0 20 40 60 80 100 120 Average On-state Current A Fig. 3 - On-state Power Loss Characteristics Maximum Average On-state Power Loss W

PDF Datasheet Preview

THYRISTOR/ THYRISTOR

IRKU/V105 SERIES

ADD-A-pakTM GEN V Power Modules

High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage

Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded
105 A

Mechanical Description

The Generation V of Add-A-pak module combine the excellent thermal performance obtained by the usage of Direct Bonded Copper substrate with superior mechanical ruggedness, thanks to the insertion of a solid Copper baseplate at the bottom side of the device. The Cu baseplate allow an easier mounting on the majority of heatsink with increased tolerance of surface roughness and improve thermal spread. The Generation V of AAP module is manufactured without hard mold, eliminating in this way any possible direct stress on the leads.

The electrical terminals are secured against axial pullout they are fixed to the module housing via a click-stop feature already tested and proved as reliable on other IR modules.

Electrical Description

These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger.

Major Ratings and Characteristics

Parameters

IRKU/V105

Units
85°C IT RMS ITSM 50Hz
60Hz I2t 50Hz
60Hz
105 165 1785 1870

A KA2s

VRRM range
400 to 1600

TSTG
- 40 to 125
- 40 to130

IRKU/V105 Series

ELECTRICAL SPECIFICATIONS Voltage Ratings

Type number

Voltage Code

VRRM , maximum repetitive

VRSM , maximum non-repetitive

VDRM , max. repetitive peak off-state voltage,
gate open circuit

IRKU/V105
1200
1300
1200
1600
1700
1600

IRRM IDRM 130°C mA
Ordering Information Table

Device Code

IRK U 105 /
16 A S90

IRK.106 types With no auxiliary cathode
1 - Module type 2 - Circuit configuration See Circuit Configuration table below 3 - Current code * * 4 - Voltage code See Voltage Ratings table 5 - A Gen V 6 - dv/dt code S90 = dv/dt 1000 V/µs

No letter = dv/dt 500 Vµs

Outline Table
* * Available with no auxiliary cathode. To specify change 105 to 106
e.g. IRKU106/16A etc.

IRKU

Dimensions are in millimeters and [inches]

IRKV

G1 K1 K2 G2 4 5 7 6

G1 K1 K2 G2 4 5 7 6

NOTE To order the Optional Hardware see Bulletin I27900 4

Maximum Allowable Case Temperature °C
130 IRK.105.. Series R thJC DC = K/W
110 Conduction Angle
30°
60°
90°
120°
180°
70 0 20 40 60 80 100 120

Average On-state Current A

Fig. 1 - Current Ratings Characteristics
160 180°
120°
90°
60°
30°
100 RMS Limit

Conduction Angle
40 IRK.105.. Series

Per Junction

T J = 130°C
0 20 40 60 80 100 120

Average On-state Current A

Fig. 3 - On-state Power Loss Characteristics

Maximum Average On-state Power Loss W

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived IRKU105/12A Datasheet file may be downloaded here without warranties.

Datasheet ID: IRKU105/12A 639085