DF06S/77

DF06S/77 Datasheet

DF005M/DF005S DF01M/DF01S DF02M/DF02S DF04M/DF04S DF06M/DF06S DF08M/DF08S DF10M/DF10S

Part	Datasheet
DF06S/77	DF06S/77 (pdf)

Related Parts	Information
DF10S/27	DF10S/27
DF08S/27	DF08S/27

PDF Datasheet Preview
DF SERIES 1A Single Phase D.I.L. Rectifier Bridge • Glass passivated chips • Leads on standard grid • Suitable for automatic insertion • High surge current capability • Fully characterised data • Wide temperature range • Surface mount option • Lead free terminals solderable as per MIL-STD-750 Method 2026 • High temperature soldering guaranteed 260°C/8-10 secs • Polarity symbols marked on the case • UL E160375 approved IO av = A IO av - VRRM range 50 to 1000V The DF Series of Single Phase Rectifier Bridges consists of four silicon junctions encapsulated in a 4 pin D.I.L. package. These devices are intended for general use in industrial and consumer equipment. Electrical Specification Maximum DC output current IFSM Maximum peak one cycle, non-repetitive surge current Maximum I2t capability for fusing VFM IRM f VRRM DF... 30 31 Units Conditions Tamb = 40oC, Resistive or inductive load Tamb = 40oC, Capacitive load t = 10ms, 20ms Following any rated t = 8.3ms, 16.7ms load condition and with t = 10ms t = 8.3ms t = 10ms t = 8.3ms rated VRRM reapplied Initial TJ = TJ max 100% VRRM reapplied Initial TJ = TJ max no voltage reapplied Ordering Information Table Device Code DF 10 S 1 - Basic Part Number 2 - Voltage Code x 100 = VRRM 3 - Terminal Type M = hole mount S = surface mount To specify tape reel option add ' TRR16' suffix. e.g. DF10STRR16 Data and specifications subject to change without notice. This product has been designed and qualified for Multiple Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS 233 Kansas St., El Segundo, California 90245, USA Tel 310 252-7105 TAC Fax 310 252-7309 Visit us at for sales contact information. 04/03

PDF Datasheet Preview

DF SERIES
1A Single Phase D.I.L. Rectifier Bridge
• Glass passivated chips
• Leads on standard grid
• Suitable for automatic insertion
• High surge current capability
• Fully characterised data
• Wide temperature range
• Surface mount option
• Lead free terminals solderable as per

MIL-STD-750 Method 2026
• High temperature soldering guaranteed 260°C/8-10 secs
• Polarity symbols marked on the case
• UL E160375 approved

IO av = A

IO av -

VRRM range
50 to 1000V

The DF Series of Single Phase Rectifier Bridges consists of four silicon junctions encapsulated in a 4 pin D.I.L. package. These devices are intended for general use in industrial and consumer equipment.

Electrical Specification

Maximum DC output
current

IFSM

Maximum peak one
cycle, non-repetitive
surge current

Maximum I2t capability
for fusing

VFM IRM f VRRM

DF...
30 31

Units

Conditions

Tamb = 40oC, Resistive or inductive load

Tamb = 40oC, Capacitive load
t = 10ms, 20ms

Following any rated
t = 8.3ms, 16.7ms load condition and with
t = 10ms t = 8.3ms t = 10ms t = 8.3ms
rated VRRM reapplied

Initial TJ = TJ max 100% VRRM reapplied Initial TJ = TJ max no voltage reapplied
Ordering Information Table

Device Code

DF 10 S
1 - Basic Part Number 2 - Voltage Code x 100 = VRRM 3 - Terminal Type M = hole mount

S = surface mount

To specify tape reel option add ' TRR16' suffix. e.g. DF10STRR16

Data and specifications subject to change without notice. This product has been designed and qualified for Multiple Level.

Qualification Standards can be found on IR's Web site.

IR WORLD HEADQUARTERS 233 Kansas St., El Segundo, California 90245, USA Tel 310 252-7105 TAC Fax 310 252-7309

Visit us at for sales contact information. 04/03

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DF06S/77 Datasheet file may be downloaded here without warranties.

Datasheet ID: DF06S/77 638999