FLUKE-360

FLUKE-360 Datasheet

Fluke 360

Part	Datasheet
FLUKE-360	FLUKE-360 (pdf)

PDF Datasheet Preview
Fluke 360 AC Leakage Current Clamp Meter Technical Data The Fluke 360, a rugged and accurate solution for leakage current measurement Ideally designed for non-invasive checks of insulation condition, the Fluke 360 allows you to perform tests without powering down the installation or disconnecting equipment saving you time, without compromising on quality or safety. The unique jaw design of the Fluke 360 eliminates the influence of adjacent current conductors, and minimizes the effects of external magnetic fields, even at low currents. This allows you to perform accurate and reliable tests in today’s crowded electrical environments. The tough and high-quality clamp design of the Fluke 360 guarantees high stability for long-term repeatability. • Measurement of leakage current with 3 mA range and 1 µA of resolution, for accurate monitoring of insulation erosion • Broad range of measurement, from 1 µA up to 60 A, for all installation needs • Advanced shielding to ensure accurate results when measuring near other conductors • The high durability clamp construction can withstand over 50,000 operations - added ruggedness that extends the life of your clamp. • Easy-to-carry, pocket-sized clamp with wide 40 mm in jaw size • Handy “Display-Hold” button for capturing readings in hard- to-reach places • Auto power-off, with warning buzzer, saves battery life • Conformance to IEC1010 and EMC standard for confident measurements • Meets all of the applications and performance classes in safety standard VDE0404-4 and VDE0702 for leakage current and differential current measurement of electrical appliances Special Features IEC 61010 and EMC Conformance IEC 61010 safety features including a tactile barrier and special jaw design provide the user with confidence when making measurements in hazardous voltage areas. Conformance to EMC standards ensures high reliability through reduced susceptibility to electromagnetic interference. The Fluke 360 also meets the latest safety standard VDE0404-4 and the new VDE0702 requirements. High Accuracy Advanced jaw design means that the Fluke 360 accuracy is little affected by external magnetic fields even at low currents. Typical external current rejection is General Specification Method of detection Display Measurement cycle Range switching Ambient temperature and humidity Temperature coefficient Influence of external magnetic field Influence of conductor position Circuit voltage Safety standard Withstanding voltage Battery type Battery life Auto power-off Diameter of measurable conductor Weight Dimension Operating altitude Mean value Digital display 3200 counts Bar-graph display 32 segments, LCD 2 times/second Digital display , 12 times/second Bar-graph display Auto-range 0 °C to 50 °C, 80 % RH or less no condensation % of range/°C or less within the ranges of 0 °C to 18 °C and 28 °C to 50 °C for measurement of 0-50 A % typical 1 on current value of adjacent cable Within accuracy 300 Vrms EN 61010-1, EN 300 V CAT II, Pollution Degree 2 kV ac for one minute 1 x 3 V Lithium battery button cell CR2032 Approx. 90 hours when continuously used Approx. 10 minutes 40 mm max. 200 g 441 lb 176 mm x 70 mm x 25 mm in x in x 1 in 2000 m 6,562 ft Electrical Specification Specifications at 23 ± 5 °C. 80 % RH max Accuracy ± % rdg + dgt = ± % readout + value of least significant digit AC Current Measurement Measuring range 3 mA 30 mA 30 A 60 A Resolution mA Accuracy 1%+5 1 % + 5 0~50 A 5 % + 5 50~60 A Mean value detection and rms-value calibration. Accuracy specified at 50/60 Hz Frequency range 15 Hz to 150 Hz Max Permissible current 60 A rms Fluke Corporation Fluke 360 AC Leakage Current Clamp Meter

PDF Datasheet Preview

Fluke 360

AC Leakage Current Clamp Meter

Technical Data

The Fluke 360, a rugged and accurate solution for leakage current measurement

Ideally designed for non-invasive checks of insulation condition, the Fluke 360 allows you to perform tests without powering down the installation or disconnecting equipment saving you time, without compromising on quality or safety. The unique jaw design of the Fluke 360 eliminates the influence of adjacent current conductors, and minimizes the effects of external magnetic fields, even at low currents. This allows you to perform accurate and reliable tests in today’s crowded electrical environments. The tough and high-quality clamp design of the Fluke 360 guarantees high stability for long-term repeatability.
• Measurement of leakage current with 3 mA range and 1 µA of
resolution, for accurate monitoring of insulation erosion
• Broad range of measurement, from 1 µA up to 60 A, for all
installation needs
• Advanced shielding to ensure accurate results when measuring near
other conductors
• The high durability clamp construction can withstand over 50,000
operations - added ruggedness that extends the life of your clamp.
• Easy-to-carry, pocket-sized clamp with wide 40 mm in jaw size
• Handy “Display-Hold” button for capturing readings in hard-
to-reach places
• Auto power-off, with warning buzzer, saves battery life
• Conformance to IEC1010 and EMC standard for confident
measurements
• Meets all of the applications and performance classes in safety
standard VDE0404-4 and VDE0702 for leakage current and
differential current measurement of electrical appliances

Special Features

IEC 61010 and EMC Conformance

IEC 61010 safety features including a tactile barrier and special jaw design provide the user with confidence when making measurements in hazardous voltage areas. Conformance to EMC standards ensures high reliability through reduced susceptibility to electromagnetic interference. The Fluke 360 also meets the latest safety standard VDE0404-4 and the new VDE0702 requirements.

High Accuracy

Advanced jaw design means that the Fluke 360 accuracy is little affected by external magnetic fields even at low currents. Typical external current rejection is

General Specification

Method of detection Display

Measurement cycle Range switching Ambient temperature and humidity Temperature coefficient

Influence of external magnetic field Influence of conductor position Circuit voltage Safety standard Withstanding voltage Battery type Battery life Auto power-off Diameter of measurable conductor Weight Dimension Operating altitude

Mean value Digital display 3200 counts Bar-graph display 32 segments, LCD 2 times/second Digital display , 12 times/second Bar-graph display Auto-range 0 °C to 50 °C, 80 % RH or less no condensation % of range/°C or less within the ranges of 0 °C to 18 °C and 28 °C to 50 °C for measurement of 0-50 A % typical 1 on current value of adjacent cable Within accuracy 300 Vrms EN 61010-1, EN 300 V CAT II, Pollution Degree 2 kV ac for one minute 1 x 3 V Lithium battery button cell CR2032 Approx. 90 hours when continuously used Approx. 10 minutes 40 mm max. 200 g 441 lb 176 mm x 70 mm x 25 mm in x in x 1 in 2000 m 6,562 ft

Electrical Specification

Specifications at 23 ± 5 °C. 80 % RH max Accuracy ± % rdg + dgt = ± % readout + value of least significant digit

AC Current Measurement

Measuring range 3 mA 30 mA 30 A 60 A

Resolution mA

Accuracy
1%+5
1 % + 5 0~50 A 5 % + 5 50~60 A

Mean value detection and rms-value calibration. Accuracy specified at 50/60 Hz Frequency range 15 Hz to 150 Hz

Max Permissible current 60 A rms

Fluke Corporation Fluke 360 AC Leakage Current Clamp Meter

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FLUKE-360 Datasheet file may be downloaded here without warranties.

Datasheet ID: FLUKE-360 635342