DR0750M10KB8G-T

DR0750M10KB8G-T Datasheet

Part	Datasheet
DR0750M10KB8G-T	DR0750M10KB8G-T (pdf)

Related Parts	Information
DR0450M5KB8G-T	DR0450M5KB8G-T

PDF Datasheet Preview
DR-T Series Rodless Linear Position Transducer DESCRIPTION The DR-T Series Rodless Linear Position Transducer allows for a large misalignment of shafts and housing, while providing quiet operation with smooth, clean signal output. The vibration-damped element helps eliminate bounce in most high vibration environments. Wiper carrier guides extruded to the full length of the housing and extended side bearings provide smooth operation under most severe side load or misalignment conditions. The DR-T Series has high dc level output for working with simple controllers and absolute continuous measurement for accurate position at power-up. IP56/NEMA 4 shaft seals protect internal components from environments and the product is instrinsically safe for Class I, II, III Division 1 Group A, B, C, D, E, F, G. This long lasting, rodless, side-sealed transducer may be used to replace rodded potentiometer in contaminated applications. Precious metal wipers are aimed at providing high performance, low noise and no oxidation. technology provides greater than 100 million dither operations for excellent durability. The rugged, ribbed housing is designed for use in most industrial environments. • Vibration-damped element • Extruded wiper carrier guides • Extended side bearings • Precious metal wipers • Greater than 100 million dither operations • Ribbed housing • High dc level output • Absolute continuous measurement • IP56/NEMA 4 • Class I, II, III Division 1 Group A, B, C, D, E, F, G • CE approved POTENTIAL APPLICATIONS • Injection molding machines • Printing presses • Meat packing equipment • Drill presses • Woodworking machines • Cranes • Front-end loaders • Scales • Semiconductor processing DR-T Series SPECIFICATIONS Characteristic Theoretical electrical travel Independent linearity Total resistance tolerance Insulation resistance Dielectric strength Operating temperature Resolution Maximum applied voltage Vmax. Imax. Ci Li Recommended wiper current Electrical connection Total mechanical travel Starting force Total weight Vibration Shock Backlash Repeatability Life Sealing Approvals Parameter 101,6 to mm 1270 mm in to 50 in] from 0% to 100% of theoretical electrical travel see order guide ±20% 1000 MOhm at 500 Vdc 1000 Vrms -65 ºC to 105 ºC [-85 ºF to 221 ºF] infinite Vdc 30 V 100 mA 0 µF 0 mH <1 µA DIN 43650 connector or equivalent 106 mm to 1275 mm in to in] 0,45 kg lb] 0,36 kg to 2,2 kg lb to lb] 20 g rms/0,75 mm, 5 Hz to 2 kHz 50 g 11 ms half sine 0,025 mm in] 0,01 mm >100 million dither operations IP56/NEMA 4 Class I, II, III Division 1 Group A, B, C, D, E, F, G CE pending CAUTION PRODUCT DAMAGE • Do not use excessive wiper current. • Maintain zero shaft side load to achieve maximum product life. Failure to comply with these instructions may result in product damage. NOTICE Do not test on an Ohm meter on the Rx 1 scale or other current devices. ELECTRICAL TRAVEL TABLE Model Code Electrical Travel 0150 152 mm in] 0200 203 mm in] 0225 229 mm in] 0305 305 mm in] 0355 355 mm in] 0400 406 mm in] 0450 457 mm in] 0500 508 mm in] 0600 610 mm in] 0750 762 mm in]

PDF Datasheet Preview

DR-T Series

Rodless Linear Position Transducer

DESCRIPTION The DR-T Series Rodless Linear Position Transducer allows for a large misalignment of shafts and housing, while providing quiet operation with smooth, clean signal output.

The vibration-damped element helps eliminate bounce in most high vibration environments. Wiper carrier guides extruded to the full length of the housing and extended side bearings provide smooth operation under most severe side load or misalignment conditions.

The DR-T Series has high dc level output for working with simple controllers and absolute continuous measurement for accurate position at power-up.

IP56/NEMA 4 shaft seals protect internal components from environments and the product is instrinsically safe for Class I, II, III Division 1 Group A, B, C, D, E, F, G.

This long lasting, rodless, side-sealed transducer may be used to replace rodded potentiometer in contaminated applications.

Precious metal wipers are aimed at providing high performance, low noise and no oxidation. technology provides greater than 100 million dither operations for excellent durability. The rugged, ribbed housing is designed for use in most industrial environments.
• Vibration-damped element
• Extruded wiper carrier guides
• Extended side bearings
• Precious metal wipers
• Greater than 100 million dither operations
• Ribbed housing
• High dc level output
• Absolute continuous measurement
• IP56/NEMA 4
• Class I, II, III Division 1 Group A, B, C, D, E, F, G
• CE approved

POTENTIAL APPLICATIONS
• Injection molding machines
• Printing presses
• Meat packing equipment
• Drill presses
• Woodworking machines
• Cranes
• Front-end loaders
• Scales
• Semiconductor processing

DR-T Series

SPECIFICATIONS Characteristic Theoretical electrical travel Independent linearity Total resistance tolerance Insulation resistance Dielectric strength Operating temperature Resolution Maximum applied voltage Vmax. Imax. Ci Li Recommended wiper current Electrical connection Total mechanical travel Starting force Total weight Vibration Shock Backlash Repeatability Life Sealing

Approvals

Parameter 101,6 to mm 1270 mm in to 50 in] from 0% to 100% of theoretical electrical travel see order guide ±20% 1000 MOhm at 500 Vdc 1000 Vrms -65 ºC to 105 ºC [-85 ºF to 221 ºF] infinite Vdc 30 V 100 mA 0 µF 0 mH <1 µA DIN 43650 connector or equivalent 106 mm to 1275 mm in to in] 0,45 kg lb] 0,36 kg to 2,2 kg lb to lb] 20 g rms/0,75 mm, 5 Hz to 2 kHz 50 g 11 ms half sine 0,025 mm in] 0,01 mm >100 million dither operations IP56/NEMA 4 Class I, II, III Division 1 Group A, B, C, D, E, F, G CE pending

CAUTION

PRODUCT DAMAGE
• Do not use excessive wiper current.
• Maintain zero shaft side load to achieve maximum
product life. Failure to comply with these instructions may result in product damage.

NOTICE

Do not test on an Ohm meter on the Rx 1 scale or other current devices.

ELECTRICAL TRAVEL TABLE

Model Code Electrical Travel
0150
152 mm in]
0200
203 mm in]
0225
229 mm in]
0305
305 mm in]
0355
355 mm in]
0400
406 mm in]
0450
457 mm in]
0500
508 mm in]
0600
610 mm in]
0750
762 mm in]

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DR0750M10KB8G-T Datasheet file may be downloaded here without warranties.

Datasheet ID: DR0750M10KB8G-T 636439