A1004RT24K1

A1004RT24K1 Datasheet

A1004RT24K1

Part	Datasheet
A1004RT24K1	A1004RT24K1 (pdf)

PDF Datasheet Preview
RT24 Surface Temperature Sensor Std. Probes & Assemblies Features • Low cost surface temperature sensor • Fast response, excellent thermal tracking • High accuracy thermistor • Wide operating temperature range: to • 2000 Volt isolation sensor to terminal • #6 stud diameter hole size Options • Hole size #8 stud diameter #10 stud diameter • Other resistance values and tolerances • Extension lead wires/connectors Description The Model RT24 is a low cost surface temperature sensor which provides a fast response time and excellent thermal tracking. It operates over a wide temperature range and can be used to monitor the temperature of heat sinks, power transistors, or any flat surface that requires thermal overload protection. The RT24 consists of a highly stable NTC thermistor epoxied to a tin-plated copper ring lug terminal. The sensor leads are AWG#24 wires with kynar insulation. A heat shrinkable sleeve is used to provide strain relief and to guarantee 2000 volt isolation between the sensor and the mounting terminal. Contact the factory for specific design or application information or the availability of options. SS&C RT24 Surface Temperature Sensor Ordering Information SS&C Part Number R25 W Material Curve A3003RT24K0 3,000 Wire Color A5003RT24K0 5,000 Blue A1004RT24K1 10,000 Black Standard resistance tolerance is ±2% at Resistance versus temperature information for material curve Z can be found on page SS&C Sensor with Extension Lead Wires SPECTRUM SENSORS & CONTROLS, INC. • 328 State Street • St. Marys, PA 15857 • Phone • Fax:814.834.1556 E-mail • Web Site:

PDF Datasheet Preview

RT24 Surface Temperature Sensor

Std. Probes & Assemblies

Features
• Low cost surface temperature sensor
• Fast response, excellent thermal tracking
• High accuracy thermistor
• Wide operating temperature range:
to
• 2000 Volt isolation sensor to terminal
• #6 stud diameter hole size

Options
• Hole size #8 stud diameter #10 stud diameter
• Other resistance values and tolerances
• Extension lead wires/connectors

Description The Model RT24 is a low cost surface temperature sensor which provides a fast response time and excellent thermal tracking. It operates over a wide temperature range and can be used to monitor the temperature of heat sinks, power transistors, or any flat surface that requires thermal overload protection.

The RT24 consists of a highly stable NTC thermistor epoxied to a tin-plated copper ring lug terminal. The sensor leads are AWG#24 wires with kynar insulation. A heat shrinkable sleeve is used to provide strain relief and to guarantee 2000 volt isolation between the sensor and the mounting terminal.

Contact the factory for specific design or application information or the availability of options.

SS&C RT24 Surface Temperature Sensor
Ordering Information

SS&C Part Number R25 W Material Curve

A3003RT24K0
3,000

Wire Color

A5003RT24K0
5,000

Blue

A1004RT24K1
10,000

Black

Standard resistance tolerance is ±2% at Resistance versus temperature information for material
curve Z can be found on page

SS&C Sensor with Extension Lead Wires

SPECTRUM SENSORS & CONTROLS, INC.
• 328 State Street
• St. Marys, PA 15857
• Phone
• Fax:814.834.1556

E-mail
• Web Site:

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived A1004RT24K1 Datasheet file may be downloaded here without warranties.

Datasheet ID: A1004RT24K1 647612