PM10-12S03

PM10-12S03 Datasheet

PM10-12S DC-DC Converters

Part	Datasheet
PM10-12S03	PM10-12S03 (pdf)

Related Parts	Information
PM10-12S05	PM10-12S05
PM10-12S12	PM10-12S12

PDF Datasheet Preview
Installation Data Sheet PM10-12S DC-DC Converters LAMBDA ELECTRONICS INC. λ The PM10 is a DC-DC converter which provides a regulated output at power levels up to 10 watts. It accepts a wide range DC input and provides a fully isolated, regulated output. In operation, either or neither input pin, as well as either or neither output pin can be grounded. PM10 units provide full output power for ambient temperatures up to 70°C, with linear derating from 70°C to zero power at 105°C. In forced air applications, full output power can be maintained as long as the chassis temperature, as measured in the center of the unit’s label, is maintained at less then or equal to 100°C. Note For safety agency approval of the end use equipment to safety standards such as UL 1950 3rd Edition, CAN/CSA C22.2 No. 950-95, DIN VDE 0805 and EN 60950 , the output of the converter is ELV if the input to the converter is ELV the output of the converter is SELV only if its input is SELV. The input and output are to be both floating or both grounded. The converter is to be protected by the specified fuse, provided in the ungrounded leg. Specifications: PM10-12S SERIES ITEMS MODEL PM10-12S03 PM10-12S05 PM10-12S12 PM10-12S15 Nominal Output Voltage Accuracy Output Current Power 70°C Operating Temperature Range Output Voltage Adjustment Range Output Ripple 20MHz BW Line Regulation Load Regulation 10% - 100% Temperature Coefficient Overshoot Input Voltage Range Efficiency Typical No Load Input Power Conducted EMI Short Circuit Protection Max Load Capacitance* Overvoltage Clamp Point fixed Isolation Input to Output Regulatory Agency Compliance** Mounting & Connections Cover Size W.H.D. Storage Temperature Cooling Vibration Relative Humidity Altitude Fungus Proofing Thermal Cycling Warranty ± 1% -25°C to + 105°C. Derate linearly above + 70°C to 0 watts at 105°C Output is Fixed, or not adjustable 20mV RMS / 75 mVp-p 25mV RMS / 100 mVp-p ± / °C No overshoot at turn on, turn off, power failure or removal of a short circuit 9 18 Vdc EN55022 Level B, FCC Level B, ANSI with external filter Continuous 750uF 470uF 68uF 68uF max. max. 14 max. max. 500Vac, 700Vdc, ETSI-300, Bellcore TR-TSY-001003, UL1950 3rd Edition, CAN/CSA C22.2 No. 950-95, EN 60950, VDE 0805 diameter, long solderable pins anodized aluminum -40°C to + 105°C Convection cooling allows full o/p rating. 2.5G RMS,10Hz 50 Hz, random vibration, 10 minutes per axis 5% - 95%, non-condensing

PDF Datasheet Preview

Installation Data Sheet

PM10-12S DC-DC Converters

LAMBDA ELECTRONICS INC. λ

The PM10 is a DC-DC converter which provides a regulated output at power levels up to 10 watts. It accepts a wide range DC input and provides a fully isolated, regulated output. In operation, either or neither input pin, as well as either or neither output pin can be grounded. PM10 units provide full output power for ambient temperatures up to 70°C, with linear derating from 70°C to zero power at 105°C. In forced air applications, full output power can be maintained as long as the chassis temperature, as measured in the center of the unit’s label, is maintained at less then or equal to 100°C.

Note For safety agency approval of the end use equipment to safety standards such as UL 1950 3rd Edition, CAN/CSA C22.2 No. 950-95, DIN VDE 0805 and EN 60950 , the output of the converter is ELV if the input to the converter is ELV the output of the converter is SELV only if its input is SELV. The input and output are to be both floating or both grounded. The converter is to be protected by the specified fuse, provided in the ungrounded leg.

Specifications:

PM10-12S SERIES

ITEMS

MODEL PM10-12S03

PM10-12S05

PM10-12S12 PM10-12S15

Nominal Output Voltage Accuracy Output Current Power 70°C Operating Temperature Range Output Voltage Adjustment Range Output Ripple 20MHz BW Line Regulation Load Regulation 10% - 100% Temperature Coefficient Overshoot Input Voltage Range Efficiency Typical No Load Input Power Conducted EMI Short Circuit Protection Max Load Capacitance* Overvoltage Clamp Point fixed Isolation Input to Output Regulatory Agency Compliance**

Mounting & Connections Cover Size W.H.D. Storage Temperature Cooling Vibration Relative Humidity Altitude Fungus Proofing Thermal Cycling

Warranty
± 1%
-25°C to + 105°C. Derate linearly above + 70°C to 0 watts at 105°C

Output is Fixed, or not adjustable
20mV RMS / 75 mVp-p
25mV RMS / 100 mVp-p
± / °C

No overshoot at turn on, turn off, power failure or removal of a short circuit
9 18 Vdc

EN55022 Level B, FCC Level B, ANSI with external filter

Continuous
750uF
470uF
68uF
68uF
max.
max.
14 max.
max.
500Vac, 700Vdc,

ETSI-300, Bellcore TR-TSY-001003, UL1950 3rd Edition, CAN/CSA C22.2

No. 950-95, EN 60950, VDE 0805
diameter, long solderable pins
anodized aluminum
-40°C to + 105°C

Convection cooling allows full o/p rating.
2.5G RMS,10Hz 50 Hz, random vibration, 10 minutes per axis
5% - 95%, non-condensing

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PM10-12S03 Datasheet file may be downloaded here without warranties.

Datasheet ID: PM10-12S03 645396