DT30U090P
DT30U090P Datasheet
DT30UxxxP
| Part | Datasheet |
|---|---|
DT30U090P |
DT30U090P (pdf) |
| PDF Datasheet Preview |
|---|
| Specification 1 Nominal Output Voltage 2 Minimum Output Current 3 Maximum Output Current 4 Maximum Peak Current 1 5 Maximum Output Power 6 Input Voltage Range 7 Efficiency 2 8 Inrush current - Maximum 3 9 Adjustment Range 10 Maximum Ripple & Noise 4 11 Total Regulation 12 Overcurrent Protection 5 13 Overvoltage Protection 6 14 Hold up time - 115VAC 15 Leakage Current 16 Operating Temperature 17 Storage Temperature 18 EMI 19 Safety 20 Other 21 Immunity 22 Size L x W x H 23 Weight 24 Input connector 25 Output cable 26 Output connector 27 Color Series DT30UxxxP DT30U050P DT30U090P DT30U120P DT30U150P DT30U180P DT30U240P 90 ~ 264VAC 47 ~ 63Hz 75% Typically None +/-5% Short Circuit, auto restart <150% of nominal 0.75mA Maximum 0 ~ 40C -40 ~ 85C FCC Class B, EN55022B, EN50081-1 UL1950, CSA 234, EN60950, MITI CE Mark EN 50082-1 IEC 801-2 Level 3 IEC 801-3 Level 2 IEC 801-4 Level 2 IEC 801-5 Level 3 112 x 60 x 36 235 oz Mates with IEC320/C13 3 wire 39" minimum Right angle 2.1mm ID, 5.5mm OD. Center pin is positive Black Notes 1 Peak current lasting for 2 secs maximum. Average power not to exceed rated maximum 2 At 100VAC or 200VAC input and maximum output power 3 At 110VAC input cold start at 25C 4 Measured across 10uF electrolytic in parallel with 0.1uF ceramic at DC output connector 5 Avoid prolonged operation in overload 6 Zener Diode protected |
| More datasheets: LTL-4234 | MPSA18_D26Z | MPSA18_D27Z | MPSA18_D74Z | MPSA18_D75Z | MDM-37PH016B | DS3104DK | 10410000004 | BSO303PNTMA1 | CA3101F16-11P |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DT30U090P Datasheet file may be downloaded here without warranties.