MK12-1A66C-500W

MK12-1A66C-500W Datasheet

MK12 Series

Part	Datasheet
MK12-1A66C-500W	MK12-1A66C-500W (pdf)

Related Parts	Information
MK12-1A66B-500W	MK12-1A66B-500W

PDF Datasheet Preview
MK12 Series Reed Sensors with Screw Fastening Mounting Holes • Position and limit switch Pneumatic or hydraulic actuator position • End motion detection for linear drive Indication and end travel limit switch • Machine industry End motion detection and door/flap control MEDER electronic MK12 sensors are magnetically operated Reed Sensors designed for screw mounting. The larger casing permits the use of higher rated switches. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch. • Form A, B, and C available • High power switches available • Other cables, connectors and colors available • Various case sizes available • Five operate sensitivities available • A choice of cable terminations and lengths are available DIMENSIONS All dimensions in mm [inch] MEDER electronic MK12 Series Reed Sensors with Screw Fastening Mounting Holes Part Number Example MK12 - 1A66 C - 500 W 1A is the contact form 66 is the switch model C is the magnetic sensitivity 500 is the cable length mm W is the termination ORDER INFORMATION Series Contact Form Switch Model MK12 - Options 1 Form A 66 52, 85 1 Form B 1 Form C * Other cable lengths available Magnetic Sensitivity xB, C, D, E C, D, E Cable length mm 500 * Termination x MAGNETIC SENSITIVITY Sensitivity Class B C D E Pull In AT Range 10 - 15 - 20 - 25 - 30 TERMINATION For wire and termination details please consult factory. Form C version requires 3 conductors. The cable cut length includes 5mm of wire stripped and tinned

PDF Datasheet Preview

MK12 Series

Reed Sensors with Screw Fastening Mounting Holes
• Position and limit switch Pneumatic or hydraulic actuator position
• End motion detection for linear drive Indication and end travel limit switch
• Machine industry End motion detection and door/flap control

MEDER electronic

MK12 sensors are magnetically operated Reed Sensors designed for screw mounting. The larger casing permits the use of higher rated switches. The sensor should be mounted on a fixed surface with the actuating magnet on the moving surface. Introduction or removal of the magnetic field determines the closing and opening of the Reed Switch.
• Form A, B, and C available
• High power switches available
• Other cables, connectors and colors available
• Various case sizes available
• Five operate sensitivities available
• A choice of cable terminations and lengths are
available

DIMENSIONS

All dimensions in mm [inch]

MEDER electronic

MK12 Series

Reed Sensors with Screw Fastening Mounting Holes

Part Number Example

MK12 - 1A66 C - 500 W
1A is the contact form 66 is the switch model C is the magnetic sensitivity 500 is the cable length mm W is the termination

ORDER INFORMATION

Series

Contact Form

Switch Model

MK12 -

Options
1 Form A
66 52, 85
1 Form B 1 Form C
* Other cable lengths available

Magnetic Sensitivity
xB, C, D, E

C, D, E

Cable length mm
500 *

Termination x

MAGNETIC SENSITIVITY

Sensitivity Class

B C D E

Pull In AT Range
10 - 15 - 20 - 25 - 30

TERMINATION

For wire and termination details please consult factory. Form C version requires 3 conductors.

The cable cut length includes 5mm of wire stripped and tinned

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MK12-1A66C-500W Datasheet file may be downloaded here without warranties.

Datasheet ID: MK12-1A66C-500W 647680