MENT1150A1851F01

MENT1150A1851F01 Datasheet

MENT1150

Part	Datasheet
MENT1150A1851F01	MENT1150A1851F01 (pdf)

Related Parts	Information
MENT1150A2451F01	MENT1150A2451F01
MENT1150A1251F01	MENT1150A1251F01
MENT1150A4851F01	MENT1150A4851F01
MENT1150A1551F01	MENT1150A1551F01
MENT1150A2851F01	MENT1150A2851F01

PDF Datasheet Preview
MENT1150 Universal Input 150 Watt Series Medical / ITE Switch-Mode Power Supply •100-240VAC Universal Input •Meets EISA2007, CEC Efficiency Level V, EU EC No 278/2009 Phase II •Desktop Style with LED Power-On indicator •12V to 48V Single Output Models, up to 150W •Modified and Custom Designs Available •Regulated Output with Low Ripple •Impact-Resistant Polycarbonate Enclosure •No Load Power Consumption <0.5W •Meets UL/EN/IEC60601-1 & 60950-1 2nd edition 3 Year Warranty Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input 100-240Vac, +/-10%, 47-63 Hz, Input Current 115VAC 3A, 230VAC 1.5A Inrush Current 75A peak 264Vac, cold start Input Fuse 4.0A, 250V Internal Primary Current Fuse provided Efficiency Meets International Efficiency Level V Output Voltage See chart Output Power See chart Ripple and Noise 1% pk-pk max., 20MHz BW Line/Load Regulation Including Cord Line +/- 1%, Load +/-5% Transient Response Minimum Load Maximum deviation of 5% with 25% to 75% load change and 0.2A/uSec slew rate Not required Case Material Black 94V0 Polycarbonate Case Dimensions see mechanical drawing Altitude -500 to 10,000 ft, operating -500 to 40,000 ft, non-operating MTBF > 100K hours calculated, 25 C at full load Hold-up Time 20 ms min. 115VAC Overvoltage Protection 130% of nominal output voltage Overload Protection 120-180% of full rated load, auto-recovery

PDF Datasheet Preview

MENT1150

Universal Input 150 Watt Series Medical / ITE Switch-Mode Power Supply
•100-240VAC Universal Input
•Meets EISA2007, CEC Efficiency Level V,

EU EC No 278/2009 Phase II
•Desktop Style with LED Power-On indicator
•12V to 48V Single Output Models, up to 150W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No Load Power Consumption <0.5W
•Meets UL/EN/IEC60601-1 & 60950-1 2nd edition
3 Year Warranty

Specifications

All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.

AC Input
100-240Vac, +/-10%, 47-63 Hz,

Input Current
115VAC 3A, 230VAC 1.5A

Inrush Current
75A peak 264Vac, cold start

Input Fuse
4.0A, 250V Internal Primary Current Fuse provided

Efficiency

Meets International Efficiency Level V

Output Voltage

See chart

Output Power

See chart

Ripple and Noise
1% pk-pk max., 20MHz BW

Line/Load Regulation

Including Cord Line +/- 1%, Load +/-5%

Transient Response Minimum Load

Maximum deviation of 5% with 25% to 75% load change and 0.2A/uSec slew rate

Not required

Case Material

Black 94V0 Polycarbonate

Case Dimensions
see mechanical drawing

Altitude -500 to 10,000 ft, operating -500 to 40,000 ft, non-operating

MTBF
> 100K hours calculated, 25 C at full load

Hold-up Time
20 ms min. 115VAC

Overvoltage Protection
130% of nominal output voltage

Overload Protection
120-180% of full rated load, auto-recovery

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MENT1150A1851F01 Datasheet file may be downloaded here without warranties.

Datasheet ID: MENT1150A1851F01 506449