GPMP900-24G

GPMP900-24G Datasheet

GPMP900 SERIES SINGLE OUTPUT MEDICAL POWER SUPPLY

Part	Datasheet
GPMP900-24G	GPMP900-24G (pdf)

PDF Datasheet Preview
GPMP900 SERIES SINGLE OUTPUT MEDICAL POWER SUPPLY High Power Supplies 900 Watt AC/DC Universal Input Power Supply • 90 -264 Vac nominal input range • Overvoltage, over temp. and short circuit protection • Approved to UL, CSA and EN Standards • Power Good LED • Low Leakage • 12 V Auxiliary output • Medical and commercial approvals The GPMP Series are universal input AC/DC power supplies with power factor correction PFC with up to 900 Watts ouput power. The GPMP product incorporates true inhibit, power fail alarm, power good signal and fan control. The series is approved to EN60601-1 and EN60950-1 to reduce design-in time and end system compliance costs All specifications are typical at nominal input, full load at 25 OC unless otherwise stated SPECIFICATIONS OUPUT SPECIFICATIONS Output Power Integral forced air Total Regulation Rise time At turn-on Transient response Main output 25% A/ms Temperature Coefficient Overvoltage protection Short Circuit protection block wall 900 Watts max. See table s max. max. dev. 350 ms recovery to 1% +/-0.03%/oC 125% +/-10% Yes EMC INFORMATION Conducted emissions EN55011 Radiated emissions EN55011 Line freq. harmonics EN61000-3-2 Voltage fluctuations EN61000-3-3 ESD Air EN61000-4-2 ESD Contact EN61000-4-2 Level B Level A Class A Complies clause 5b 8 kV contact 6 kV air Radiated immunity Fast Transients EFT Line surge immunity Conducted immunity Power freq. mag. field Voltage dip immunity

PDF Datasheet Preview

GPMP900 SERIES SINGLE OUTPUT MEDICAL POWER SUPPLY

High Power Supplies 900 Watt AC/DC Universal Input Power Supply
• 90 -264 Vac nominal input range
• Overvoltage, over temp. and short circuit protection
• Approved to UL, CSA and EN Standards
• Power Good LED
• Low Leakage
• 12 V Auxiliary output
• Medical and commercial approvals

The GPMP Series are universal input AC/DC power supplies with power
factor correction PFC with up to 900 Watts ouput power. The GPMP
product incorporates true inhibit, power fail alarm, power good signal and
fan control. The series is approved to EN60601-1 and EN60950-1 to reduce
design-in time and end system compliance costs

All specifications are typical at nominal input, full load at 25 OC unless otherwise stated

SPECIFICATIONS

OUPUT SPECIFICATIONS

Output Power

Integral forced air

Total Regulation

Rise time

At turn-on

Transient response

Main output 25% A/ms

Temperature Coefficient

Overvoltage protection

Short Circuit protection block wall
900 Watts max. See table s max. max. dev. 350 ms recovery to 1% +/-0.03%/oC
125% +/-10% Yes

EMC INFORMATION

Conducted emissions EN55011

Radiated emissions EN55011

Line freq. harmonics EN61000-3-2

Voltage fluctuations EN61000-3-3

ESD Air

EN61000-4-2

ESD Contact

EN61000-4-2

Level B Level A Class A Complies clause 5b 8 kV contact 6 kV air

Radiated immunity Fast Transients EFT

Line surge immunity Conducted immunity Power freq. mag. field Voltage dip immunity

More datasheets: 10326-ER | M213106 SL001 | M213106 SL002 | M213106 SL005 | 74ACT563SC | 74ACT563SCX | 2121 | FJN3314RBU | ELST-405SYGWA/S530-E2 | 5111

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived GPMP900-24G Datasheet file may be downloaded here without warranties.

Datasheet ID: GPMP900-24G 506423