EFM32-G2XX-DK

EFM32-G2XX-DK Datasheet

EFM32 Gecko Development Kit

Part	Datasheet
EFM32-G2XX-DK	EFM32-G2XX-DK (pdf)

Related Parts	Information
EFM32-G8XX-DK	EFM32-G8XX-DK

PDF Datasheet Preview
...the world's most energy friendly microcontrollers EFM32 Gecko Development Kit EFM32-G2XX-DK/EFM32-G8XX-DK Preliminary The EFM32 Gecko Development Kit is a platform for rapid prototyping of ultra low power microcontroller applications. It consists of a mother board, a replaceable MCU-board and a prototyping-board, along with a comprehensive software development environment. The development kit contains a unique Advanced Energy Monitoring AEM system that allows designers to have full control over their application’s energy consumption. Combined with the possibility to isolate the motherboard’s components not relevant for the end application, designers can optimize all variables that will make their application as energy efficient as possible. The on-board emulator enables extremely simple setup, and combined with the versatile peripherals e.g. accelerometer, TFT-display, audio input/output, RS232, user LEDs / buttons , the development kit gives a complete basis for application design and prototyping. • Advanced Energy Monitor AEM • Precise measurement of current and voltage • µA to 50 mA measurement range • Always available by pushing a button • Software • Comprehensive set of board support functions • 32 KB evaluation versions of • KEILTM MDK-ARM Microcontroller Development Kit • IAR Embedded • User Interface • 320x240 TFT display • 16 User LEDs • 8 rocker style miniature DIP switches • 4 pushbutton switches • Miniature joystick • 1 system reset pushbutton switch • Potmeter • Analog Features • Ambient light sensor / Photo resistor • 3 axis accelerometer • Temperature sensor • Line-in / Line-out analog interface • Two single ended and one differential analog input • Communication • 2 RS232 serial ports • Infrared transceiver • Debugging • Onboard SEGGER J-Link USB emulator • ARM 20 pin JTAG/SWD standard Debug in/out connector • Memory • 4 Mbit fast access SRAM • 32 Mbit NOR flash • 2 kbit I2C bus EEPROM • 16 Mbit SPI Flash • Micro SD expansion port • Power • Two separate power domains allowing for accurate current and voltage measurements of the application energy consumption. • External 5 V supply • 5 V / 500 mA USB supply • Prototype Board • All EFM32 GPIO pins available • 3 power domains 5 V unregulated, AEM measured VDDm and unmeasured VDD • User LEDs • MCU Board • LCD EFM32-G8XX-DK only • kHz crystal • 32 MHz crystal • LEDs indicating power and reset • Setup Control • FPGA controlling switches and connections • I2C EEPROM for identification of prototype- and MCUboards 1 Ordering Information ...the world's most energy friendly microcontrollers Table Available Products Ordering Code EFM32-G2XX-DK EFM32-G8XX-DK EFM32-GXXX-PTB Description EFM32 Gecko Development Kit with EFM32G290F128 MCU plugin board EFM32 Gecko Development Kit with EFM32G890F128 MCU plugin board with 160 segment LCD EFM32 Gecko Development Kit prototyping board Energy Micro Corporate Headquarters Postal Address Energy Micro AS P.O. Box 4633 Nydalen N-0405 Oslo NORWAY Visitor Address Energy Micro AS Sandakerveien 118 N-0405 Oslo NORWAY Technical Support Phone +47 40 10 03 01 Phone +47 23 00 98 00 Fax + 47 23 00 98 01 Global Contacts Visit for information on global distributors and representatives or contact for additional information. Americas Energy Micro AS 28175 Haggerty Road Suite 106, Novi Michigan 48377 USA Phone +1 2489947674 Fax +1 2489947675 EMEA Energy Micro AS P.O. Box 4633 Nydalen N-0405 Oslo NORWAY Phone +44 0 7789861338 Fax + 47 23 00 98 01 APAC Energy Micro AS P.O. Box 4633 Nydalen N-0405 Oslo NORWAY Mob China +86 13602611177 Mob Hong Kong +852 90167782 Fax + 47 23 00 98 01

PDF Datasheet Preview

...the world's most energy friendly microcontrollers

EFM32 Gecko Development Kit

EFM32-G2XX-DK/EFM32-G8XX-DK Preliminary

The EFM32 Gecko Development Kit is a platform for rapid prototyping of ultra low power microcontroller applications. It consists of a mother board, a replaceable MCU-board and a prototyping-board, along with a comprehensive software development environment. The development kit contains a unique Advanced Energy Monitoring AEM system that allows designers to have full control over their application’s energy consumption. Combined with the possibility to isolate the motherboard’s components not relevant for the end application, designers can optimize all variables that will make their application as energy efficient as possible. The on-board emulator enables extremely simple setup, and combined with the versatile peripherals e.g. accelerometer, TFT-display, audio input/output, RS232, user LEDs / buttons , the development kit gives a complete basis for application design and prototyping.
• Advanced Energy Monitor AEM
• Precise measurement of current and voltage
• µA to 50 mA measurement range
• Always available by pushing a button
• Software
• Comprehensive set of board support functions
• 32 KB evaluation versions of
• KEILTM MDK-ARM Microcontroller Development Kit
• IAR Embedded
• User Interface
• 320x240 TFT display
• 16 User LEDs
• 8 rocker style miniature DIP switches
• 4 pushbutton switches
• Miniature joystick
• 1 system reset pushbutton switch
• Potmeter
• Analog Features
• Ambient light sensor / Photo resistor
• 3 axis accelerometer
• Temperature sensor
• Line-in / Line-out analog interface
• Two single ended and one differential analog input
• Communication
• 2 RS232 serial ports
• Infrared transceiver
• Debugging
• Onboard SEGGER J-Link USB emulator
• ARM 20 pin JTAG/SWD standard Debug in/out connector
• Memory
• 4 Mbit fast access SRAM
• 32 Mbit NOR flash
• 2 kbit I2C bus EEPROM
• 16 Mbit SPI Flash
• Micro SD expansion port
• Power
• Two separate power domains allowing for accurate current and voltage measurements of the application energy consumption.
• External 5 V supply
• 5 V / 500 mA USB supply
• Prototype Board
• All EFM32 GPIO pins available
• 3 power domains 5 V unregulated, AEM measured VDDm and unmeasured VDD
• User LEDs
• MCU Board
• LCD EFM32-G8XX-DK only
• kHz crystal
• 32 MHz crystal
• LEDs indicating power and reset
• Setup Control
• FPGA controlling switches and connections
• I2C EEPROM for identification of prototype- and MCUboards
1 Ordering Information
...the world's most energy friendly microcontrollers

Table Available Products
Ordering Code EFM32-G2XX-DK EFM32-G8XX-DK EFM32-GXXX-PTB

Description EFM32 Gecko Development Kit with EFM32G290F128 MCU plugin board EFM32 Gecko Development Kit with EFM32G890F128 MCU plugin board with 160 segment LCD EFM32 Gecko Development Kit prototyping board

Energy Micro Corporate Headquarters

Postal Address

Energy Micro AS P.O. Box 4633 Nydalen N-0405 Oslo NORWAY

Visitor Address

Energy Micro AS Sandakerveien 118 N-0405 Oslo NORWAY

Technical Support

Phone +47 40 10 03 01

Phone +47 23 00 98 00 Fax + 47 23 00 98 01

Global Contacts

Visit for information on global distributors and representatives or contact for additional information.

Americas

Energy Micro AS 28175 Haggerty Road Suite 106, Novi Michigan 48377 USA Phone +1 2489947674 Fax +1 2489947675

EMEA

Energy Micro AS P.O. Box 4633 Nydalen N-0405 Oslo NORWAY Phone +44 0 7789861338 Fax + 47 23 00 98 01

APAC

Energy Micro AS P.O. Box 4633 Nydalen N-0405 Oslo NORWAY Mob China +86 13602611177 Mob Hong Kong +852 90167782 Fax + 47 23 00 98 01

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived EFM32-G2XX-DK Datasheet file may be downloaded here without warranties.

Datasheet ID: EFM32-G2XX-DK 511159