GP1A44E1

GP1A44E1 Datasheet


GP1A44E1

Part Datasheet
GP1A44E1 GP1A44E1 GP1A44E1 (pdf)
Related Parts Information
GP1A44E1J00F GP1A44E1J00F GP1A44E1J00F
PDF Datasheet Preview
GP1A44E1
s Features With compact actuator Easy wiring due to built-in connector Snap-in mounting type in order to
mount to an equipment easily OPIC output type for direct connection
to microcomputer
s Applications Copiers Laser beam printers Facsimiles

GP1A44E1

Transmissive Type Photointerrupter with Actuator
s Outline Dimensions

Unit mm

R0.5 20

Internal connection diagram Voltage regulator 1 2 15k
1 GND
2 VOUT 3 VCC
3 Amp
* Tolerance :± 0.3mm * Reference dimensions g DF3A-3P-2DSA made by

HIROSE Japan Co. Ltd.
*“ OPIC” Optical IC is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signalprocessing circuit integrated onto a single chip.
s Absolute Maximum Ratings

Parameter Supply voltage *1Output current *2 Operating temperature *2 Storage temperature

Symbol VCC I OL Topr Tstg
*1 Collector current of output transistor *2 The connector should be plugged in/out at normal temperature.

Rating

Unit
- to + 10
- 20 to + 75
- 40 to + 85
“ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.”

GP1A44E1
s Electro-optical Characteristics

Unless otherwise specified, VCC= 5V, Ta=

Parameter Low level dissipation current

Low level output voltage

High level dissipation current High level output voltage Operating supply voltage

Symbol I CCL

I CCH VOH VCC

Conditions Light beam interrupted Light beam interrupted IOL = 16mA Light beam uninterrupted Light beam uninterrupted Ta =- 20 to +

MIN. TYP. MAX. Unit

V CC x -
* Condition of light beam interrupted Lever is normal condition on the Fig.1. Condition of light beam uninterrupted Lever is or more movement condition from A point to B point on Fig.1.

Fig. 1 Detecting Position

C point
More datasheets: 20032 | AOD607_DELTA | AOD607_001 | DM74LS163AN | DM74LS161AM | DM74LS161AN | FJNS4210RBU | FJNS4210RTA | B39901B3772Z810 | GP1A44E1J00F


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived GP1A44E1 Datasheet file may be downloaded here without warranties.

Datasheet ID: GP1A44E1 515930