5.49263.0140500
5.49263.0140500 Datasheet
| Part | Datasheet |
|---|---|
5.49263.0140500 |
5.49263.0140500 (pdf) |
| Related Parts | Information |
|---|---|
5.49263.0140200 |
5.49263.0140200 |
5.49263.0140400 |
5.49263.0140400 |
5.49263.0140300 |
5.49263.0140300 |
| PDF Datasheet Preview |
|---|
| The New Control Component Generation RAFIX 22QR The new 22 mm Control Component Generation made by Rafi Contact blocks marked with different colours for ease of identification in stock and when connecting • NC contacts red • NO contacts green • NC / NO contacts red / green • Lamp socket black • Silver contacts: basic housing colour is black • Gold contacts: basic housing colour is grey • The terminals associated with a contact pair are colour coded on the connection side and marked with the respective contact numbers. The lamps of pushbuttons and signal lamps can be replaced from the front. This method saves time and increases safety since it eliminates the need for accessing the machine / control station interior and handling live cables for lamp replacement. After unscrewing the front ring, the lens can be removed and the lamp replaced. cast-on collar seal The components feature a removable locating lug. If installed without locating lug, the ring nut with claw can be used. Accurate alignment of the actuator can be achieved behind the front panel. The cast-on collar seal can not get lost nor be twisted during installation and allows single-person assembly the actuator is held in the mounting hole by the cast-on seal and can then be fixed by screwing from the rear. First, snap the lamp socket and contact blocks into the coupling. Then snap the assembly on to the actuator. To release it, the bayonet lever must be pressed prevents inadvertent releasing at the same time . Screw terminals or cage clamp terminals The RAFIX 22 QR contact blocks are available in two different connection styles as required for your application: Screw terminals The terminals are open and the captive screws are mounted in the terminal recess. Cage clamp terminals Simply insert a screwdriver to open the terminal, insert the cable and remove the screwdriver to close the terminal. Your advantage: This offers you savings in three ways • Drastically reduced assembly time thanks to wire insertion from the rear, i.e. no more bending and lateral insertion of the wires required. • You save material No wire end sleeves are required. • You save the time previously required for mounting the wire end sleeves. RAFIX 22 QR Easy assembly of RAFIX 22QR. Screw terminals Cage clamp terminals Insert the wire. Open the terminal. Sealed for life against humidity and dirt The special seal reliably prevents moisture, oil and dust from penetrating to the contact block. In contrast to other sealing types which move up and down the shaft, this special seal is firmly seated on the housing.This is why the RAFIX 22QR range offers switching reliability throughout the operating life degree of protection IP 65 to DIN . Tighten the screw. Insert the wire. Done. Remove the screwdriver. Versatility of design for customized panels The RAFIX 22QR system does not only have a particularly low profile as compared to its predecessor and its competitors but is also available in many different versions. Your design options for your customized panels are nearly unlimited thanks to the interchangeable front rings and lenses. In this way you can achieve an attractive design while ensuring safe operation of your equipment at the same time. RAFIX 22QR components are available either with a round or with a square collar. The square version can be mounted in flush fitting rows just like a self-contained pushbutton block. In this way, dirt cannot accumulate between the individual pushbuttons. Your panels will always remain attractive and functionally reliable. The new RAFIX 22QR control component range meets all the technical requirements and current standards for control gear. All the components have been designed from scratch, with a special view to progressive design and ease of assembly. As a result, we developed a state-ofthe-art product with an optimum cost / benefit ratio. The system is of modular design. Actuators, contact blocks and lamp sockets can be combined freely. This means that you may implement modifications of design or configuration even at the last minute. An additional positive effect is the reduction of stockholding costs. Sequence of assembly / disassembly • Fix the actuator in the front panel with the ring nut. • Snap the individual elements a maximum three contact blocks or two contact blocks together with a lamp socket in the coupling. You can install them on any assembling axis. • Insert the lamp or LED into the lamp socket. • Snap the coupling with the contact blocks on to the actuator. • Connect the cables. • Disassembly is performed in Assembly Disassembly Approvals ing Part no. BG zert. VDE 0660 Ordering example Flush pushbutton, illuminated, round collar, without legend, momentary, blue lens Order no. * For your individual colour combination designs, please refer to the "RAFIX 22QR single parts" chapter for various versions of housings, front rings, lenses and legend inserts. green /1500 blue /1600 M22x1.5 M22x1.5 RAFIX 22QR pushbuttons, illuminated, plastic front ring 1 q, flush pushbutton Legending in black letters Order no. Momentary function Order no. Latching function None I / Colour no. / Colour no. / Colour no. 2 s , flush pushbutton None I / Colour no. / Colour no. / Colour no. 3 q, protruding pushbutton 4 s , protruding pushbutton 5 q, protruding collar None 0 None 0 None / Colour no. / Colour no. / Colour no. / Colour no. / Colour no. / Colour no. / Colour no. 1...6mm 1...6mm 1...6mm 1...6mm 1...6mm M22x1.5 M22x1.5 0 M22x1.5 6 s , protruding collar None / Colour no. 1...6mm M22x1.5 Colour no. for front ring and transparent lens* Ordering example Flush pushbutton, non-illuminated, round collar, without legend, momentary, blue lens Order no. * For your individual colour combination designs, please refer to the "RAFIX 22QR single parts" chapter for various versions of housings, front rings, lenses and legend inserts. green /0500 blue /0600 slate grey /0700 M22x1.5 M22x1.5 RAFIX 22QR pushbuttons, non-illuminated, plastic front ring 1 q, flush pushbutton Legending in black letters Order no. Momentary function None 0 I / Colour no. / Colour no. / Colour no. / Colour no. Order no. Latching function 2 s , flush pushbutton None / Colour no. / Colour no. / Colour no. / Colour no. 3 q, protruding pushbutton 4 s , protruding pushbutton 5 q, protruding collar None 0 I None 0 I None / Colour no. / Colour no. / Colour no. / Colour no. / Colour no. / Colour no. / Colour no. / Colour no. / Colour no. / Colour no. / Colour no. 1...6mm 1...6mm 1...6mm 1...6mm 1...6mm M22x1.5 M22x1.5 0 M22x1.5 Ordering example Flush pushbutton, non-illuminated, * For your individual colour combination designs, please refer round collar, without legend, momentary, to the "RAFIX 22QR single parts" chapter for various versions black front ring Order no. of housings, front rings, lenses and legend inserts. blue /0206 slate grey /0207 silver /0208 /0108 /0308 /0408 /0508 /0608 /0708 M 22x1.5 RAFIX 22QR selector switches, illuminated Function Collar shape 1x45°, momentary Front ring Plastic Metallized Order no. Order no. Short handle Long handle s collar, short handle 2x45°, momentary* Plastic Metallized 1x 90°, latching Plastic Metallized q collar, long handle 2x 90°, latching* Plastic Metal 1x 90°, latching Plastic Metallized 2x 60°, latching* Plastic Metallized 1x 90°, latching* 1x45°, momentary Plastic Metallized M 22x1.5 Mark white red yellow green blue Ring black /2201 red /2203 Front ring plastic yellow Ordering example Selector switch, illuminated, 1 x 45°, momentary, round collar, black plastic front ring, short handle, white handle mark Order no. *Please use only two contact blocks on left and right position. A third contact block in the middle position may not be mounted. slate grey /2207 silver /2208 Front ring metal /2200 /2300 /2400 /2500 /2600 Ring nut with claw included RAFIX 22QR selector switches, non-illuminated Function Collar shape 1x45°, momentary Front ring Plastic Metallized Order no. Order no. Short handle Long handle 2x45°, momentary* Plastic s collar, short handle Plastic Metallized Metallized M 22x1.5 1x 90°, latching Plastic Metallized 2x 90°, latching* Plastic q collar, long handle Plastic Metallized Metallized M 22x1.5 1x 90°, latching Plastic Metallized 2x 60°, latching* Plastic Metallized 1x 90°, latching* 1x45°, momentary Plastic Metallized Colour no. for front ring and opaque handle mark Mark white red yellow green blue Ring Ordering example Selector switch, non-illuminated, 1 x 45°, momentary, round collar, black plastic front ring, short handle, white handle mark Order no. *Please use only two contact blocks on left and right position. A third contact block in the middle position may not be mounted. slate grey /0207 silver /0208 Front ring metal /0200 /0300 /0400 /0500 /0600 Ring nut with claw included M 22x1.5 RAFIX 22QR keylock switches, metal front ring Function 1 x 45°, momentary Key removal position 2 x 45°, momentary* q collar s collar 1 x 90°, latching 1 x 90°, latching 2 x 90°, latching* 0+I 0+I 0+I 0+I 0+I 0+I 0+2 0+2 0+I+2 0+I+2 2x 60°, latching* 0+I+2 0+I+2 Collar shape Order no. M 22x1.5 Lock no. 455, Ronis. Other lock numbers on request. 1 x 90°, latching* 1 x 45°, momentary 0+2 0+2 Lock characteristics metal and plastic front ring Wafers: No. of lock types: Main key: Group key: *Please use only two contact blocks on left and right position. A third contact block in the middle position may not be mounted. Ring nut with claw and 2 keys included. RAFIX 22QR keylock switches, plastic front ring Function 1 x 45°, momentary Key removal position Ordering example Mushroom-headed pushbutton 40 mm, round collar, silver plastic front ring, black mushroom head Order no. white /0208 /0200 red /0308 /0300 yellow /0408 /0400 green /0508 /0500 blue /0608 /0600 slate grey /0708 /0700 M22x1.5 RAFIX 22QR emergency stop pushbuttons, dupe-proof to EN 418 Order no. Non-illuminated Order no. Illuminated /0300 2 with indicator acc. to EN 81 /0300 3 with keylock /0300 4 beleuchtbar /0300 M 22x1.5 M22x1.5 M 22x1.5 M 22x1.5 The emergency stop pushbuttons meet the requirements of DIN EN 60 204, IEC 73, IEC 204, IEC 947, DIN EN 60 947, VDE 0660 Part 200 and VDE 0113 Part They are dupe-proof according to EN 418 thanks to the positive-action mechanical movement sequence. To prevent inadvertent actuation, a certain operating force must be exerted at the action point. The button latches when being pressed and can be reset by turning to the right or left. Due to the design of the actuating element the emergency stop switch is protected against interlocking, i.e. a started emergency stop process cannot be interrupted by jamming elements. The green ring below the actuator shows the switching position of the pushbutton it can not be seen any more when the pushbutton is pressed. Emergency stop label plates see accessories. Ring nut with claw included, 3 2 keys included Switching position indication according EN 81 According to this norm the switching position of an emergency stop pushbutton must be visible from the front and from the side. The Rafi pushbutton position 2 has a mechanical indicator at the top which changes from green to red, when actuated. The green ring shows the switching position from the side. not actuated actuated RAFIX 22QR signal indicators 1 q collar Order no. Labelling with legend inserts* Order no. No labelling 1...6mm M22x1.5 2 s collar / Colour no. / Colour no. Ordering example Signal indicator, round collar, no labelling, blue Order no. red transparent /1300 /2300 yellow transparent /1400 /2400 green transparent /1500 /2500 blue transparent /1600 /2600 RAFIX 22QR lamp sockets with coupling, screw terminals Version Switching symbol Lamp socket BA 9 s 250 V / 2 W Order no. Lamp socket BA 9 s X1 with diode and series resistor 250 V / 130 V / 2 W RAFIX 22QR lamp sockets without coupling, screw terminals Version Switching symbol Lamp socket 250 V / 2 W Lamp socket X1 with diode and series resistor 250 V / 130 V / 2 W For lamps and LEDs, refer to accessories page. Order no. Accessory Coupling RAFIX 22QR contact blocks complete with coupling, screw terminals Example 1 NO contact, silver, 250 V Version 1 NC contact 1 NO contact 1 NC, 1 NC Reference no. Switching symbol on coupling Order no. silver 250 V 1 NO, 1 NO 1 NO, 1 NC RAFIX 22QR contact blocks and lamp sockets complete with coupling, screw terminals Example 1 NC contact, silver, 250 V, 1 lamp socket Version 1 NC, 1 lamp socket 1 NO contact, 1 lamp socket Reference no. Switching symbol on coupling |
| More datasheets: MU14-8FFBK | PT7M1818-5TE | PT7M1818-20TE | PT7M1818-10TE | PT7M1813-10TE | PT7M1818-20TEX | PT7M1818-10TEX | PT7M1813-10TEX | PT7M1818-5TEX | 5.49263.0140200 |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 5.49263.0140500 Datasheet file may be downloaded here without warranties.