PT7M1818-10TE

PT7M1818-10TE Datasheet

PT7M1818/1813

Part	Datasheet
PT7M1818-10TE	PT7M1818-10TE (pdf)

Related Parts	Information
PT7M1818-5TE	PT7M1818-5TE
PT7M1818-20TE	PT7M1818-20TE
PT7M1813-10TE	PT7M1813-10TE
PT7M1818-20TEX	PT7M1818-20TEX
PT7M1818-10TEX	PT7M1818-10TEX
PT7M1813-10TEX	PT7M1813-10TEX
PT7M1818-5TEX	PT7M1818-5TEX

PDF Datasheet Preview
PT7M1818/1813 Supervisory Circuit • Highly accurate 25°C • Accurate power monitoring 2.5V, 2.9V, 3.0V PT7M1818 , and 4.6V PT7M1813 • Operating voltage range 1.0V ~ 5.5V • Operating temperature range -40°C to + 85°C • Detect voltage temperature characteristics: TYP • Efficient open-drain output with internal pull-up resistor • Maintains reset for 200ms after VCC returns to an in- tolerance condition The series are designed to monitor power supplies in µP and digital systems. It provides excellent circuit reliability and low cost by eliminating external components and adjustments. This device performs a single function it asserts a reset signal whenever the VCC supply voltage falls below a preset threshold. Reset remains asserted for 200ms after VCC has risen above the reset threshold. PT7M1818/1813 are bidirectional output, allowing it to be directly connected to µP with bidirectional reset inputs. Pin Configuration PT7M1818/1813 1 RST GND 3 2 VCC SOT23-3 Pin Description Name Type Reset Output and Pushbutton Input RST is asserted when VCC drops below voltage threshold VTH-. Active low. When other devices pull RST low, the reset condition occurs and will remain a reset timeout period after the external signal is off. Ground Supply Voltage. 2014-08-0010 PT0190-7 09/11/14 Maximum Ratings Storage Temperature to +150oC Ambient Temperature with Power Applied.......................... -40oC to +85oC Supply Voltage to Ground Potential Vcc to GND ..............-0.3V to +7.0V DC Input Voltage All inputs except Vcc and GND ......-0.3V to VCC+0.3V DC Output Current All outputs Power Dissipation 320mW Depend on package PT7M1818/1813 Supervisory Circuit Note Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. DC Electrical Characteristics TA= -40~85ºC, unless otherwise noted. Typical values are at TA = +25ºC Sym. Test Conditions Unit Supply Voltage Supply Current Voltage Threshold Hysteresis VCC ICC VTHVHYS VCC = 5.5V. No load. VCC = 3.6V. No load. +25C -40C~85C VTH+ - VTH-* VTH- VTH- VTH- VTH- VTH- VTH- Output Driving Output low Ordering Information Part Number PT7M1818-20TE PT7M1818-10TE PT7M1818-5TE PT7M1813-15TE PT7M1813-10TE PT7M1813-5TE Note • E = Pb-free or Pb-free and Green • Adding X Suffix= Tape/Reel • Contact Pericom for availability. Package Code T 2014-08-0010 5 Package Lead free and Green SOT23-3 Lead free and Green SOT23-3 Lead free and Green SOT23-3 Lead free and Green SOT23-3 Lead free and Green SOT23-3 Lead free and Green SOT23-3 PT0190-7 09/11/14 Small Package Top Marking Instruction AA LJ PART NO. 2 BIT CODE See Table 1 DATE CODE YEAR & WORK WEEK PT7M1818/1813 Supervisory Circuit Lead-Free Sign - lead-free or Lead free and Green Sample QWLJ PART NO. PT7M1818-20 DATE CODE YEAR 2003 WW10 Lead free and Lead free and Green package Table Function comparison Item 1 2 3 4 5 6 PT7M1818-20 PT7M1818-10 PT7M1818-5 PT7M1813-15 PT7M1813-10 PT7M1813-5 Open-Drain Active high Active low Reset Output Push-Pull Active high Active low Table 2 Marking code for products No. 1 2 3 4 5 6 Part No. PT7M1818-20 PT7M1818-10 PT7M1818-5 PT7M1813-15 PT7M1813-10 PT7M1813-5 Code QW RA RB RL RO RR Bi-direct Active low       VTH- V Pericom Semiconductor Corporation  1-800-435-2336  Pericom reserves the right to make changes to its products or specifications at any time, without notice, in order to improve design or performance and to supply the best possible product. Pericom does not assume any responsibility for use of any circuitry described other than the circuitry embodied in Pericom product. The company makes no representations that circuitry described herein is free from patent infringement or other rights, of Pericom. 2014-08-0010 PT0190-7 09/11/14

PDF Datasheet Preview

PT7M1818/1813

Supervisory Circuit
• Highly accurate 25°C
• Accurate power monitoring 2.5V, 2.9V, 3.0V

PT7M1818 , and 4.6V PT7M1813
• Operating voltage range 1.0V ~ 5.5V
• Operating temperature range -40°C to + 85°C
• Detect voltage temperature characteristics:

TYP
• Efficient open-drain output with internal pull-up
resistor
• Maintains reset for 200ms after VCC returns to an in-
tolerance condition

The series are designed to monitor power supplies in µP and digital systems. It provides excellent circuit reliability and low cost by eliminating external components and adjustments. This device performs a single function it asserts a reset signal whenever the VCC supply voltage falls below a preset threshold. Reset remains asserted for 200ms after VCC has risen above the reset threshold. PT7M1818/1813 are bidirectional output, allowing it to be directly connected to µP with bidirectional reset inputs.

Pin Configuration

PT7M1818/1813
1 RST GND 3
2 VCC SOT23-3

Pin Description

Name

Type

Reset Output and Pushbutton Input RST is asserted when VCC drops below voltage threshold VTH-. Active low. When other devices pull RST low, the reset condition occurs and will remain a reset timeout period after the external signal is off.

Ground Supply Voltage.
2014-08-0010

PT0190-7
09/11/14

Maximum Ratings

Storage Temperature to +150oC Ambient Temperature with Power Applied.......................... -40oC to +85oC Supply Voltage to Ground Potential Vcc to GND ..............-0.3V to +7.0V DC Input Voltage All inputs except Vcc and GND ......-0.3V to VCC+0.3V DC Output Current All outputs Power Dissipation 320mW Depend on package

PT7M1818/1813 Supervisory Circuit

Note Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.

DC Electrical Characteristics

TA= -40~85ºC, unless otherwise noted. Typical values are at TA = +25ºC

Sym.

Test Conditions

Unit

Supply Voltage Supply Current

Voltage Threshold Hysteresis

VCC ICC

VTHVHYS

VCC = 5.5V. No load. VCC = 3.6V. No load. +25C -40C~85C VTH+ - VTH-*

VTH- VTH-

VTH-

VTH-

VTH-

VTH-

Output Driving

Output low
Ordering Information

Part Number PT7M1818-20TE PT7M1818-10TE PT7M1818-5TE PT7M1813-15TE PT7M1813-10TE PT7M1813-5TE Note
• E = Pb-free or Pb-free and Green
• Adding X Suffix= Tape/Reel
• Contact Pericom for availability.

Package Code T
2014-08-0010 5

Package Lead free and Green SOT23-3 Lead free and Green SOT23-3 Lead free and Green SOT23-3 Lead free and Green SOT23-3 Lead free and Green SOT23-3 Lead free and Green SOT23-3

PT0190-7
09/11/14

Small Package Top Marking Instruction

AA LJ

PART NO. 2 BIT CODE

See Table 1

DATE CODE YEAR & WORK WEEK

PT7M1818/1813 Supervisory Circuit

Lead-Free Sign - lead-free or Lead free and Green

Sample QWLJ

PART NO. PT7M1818-20 DATE CODE YEAR 2003 WW10 Lead free and Lead free and Green package

Table Function comparison

Item
1 2 3 4 5 6

PT7M1818-20 PT7M1818-10 PT7M1818-5 PT7M1813-15 PT7M1813-10 PT7M1813-5

Open-Drain

Active high Active low

Reset Output

Push-Pull

Active high Active low

Table 2 Marking code for products

No. 1 2 3 4 5 6

Part No. PT7M1818-20 PT7M1818-10 PT7M1818-5 PT7M1813-15 PT7M1813-10 PT7M1813-5

Code QW RA RB RL RO RR

Bi-direct Active low
     

VTH- V

Pericom Semiconductor Corporation  1-800-435-2336 

Pericom reserves the right to make changes to its products or specifications at any time, without notice, in order to improve design or performance and to supply the best possible product. Pericom does not assume any responsibility for use of any circuitry described other than the circuitry embodied in Pericom product. The company makes no representations that circuitry described herein is free from patent infringement or other rights, of Pericom.
2014-08-0010

PT0190-7
09/11/14

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived PT7M1818-10TE Datasheet file may be downloaded here without warranties.

Datasheet ID: PT7M1818-10TE 510124