5.49263.0140200

5.49263.0140200 Datasheet


Part Datasheet
5.49263.0140200 5.49263.0140200 5.49263.0140200 (pdf)
Related Parts Information
5.49263.0140500 5.49263.0140500 5.49263.0140500
5.49263.0140400 5.49263.0140400 5.49263.0140400
5.49263.0140300 5.49263.0140300 5.49263.0140300
PDF Datasheet Preview
The New Control Component Generation

RAFIX 22QR The new 22 mm Control Component Generation made by Rafi

Contact blocks marked with different colours for ease of identification in stock and when connecting
• NC contacts red
• NO contacts green
• NC / NO contacts red / green
• Lamp socket black
• Silver contacts:
basic housing colour is black
• Gold contacts:
basic housing colour is grey
• The terminals associated with a contact
pair are colour coded on the connection side and marked with the respective contact numbers.

The lamps of pushbuttons and signal lamps can be replaced from the front. This method saves time and increases safety since it eliminates the need for accessing the machine / control station interior and handling live cables for lamp replacement. After unscrewing the front ring, the lens can be removed and the lamp replaced.
cast-on collar seal

The components feature a removable locating lug. If installed without locating lug, the ring nut with claw can be used. Accurate alignment of the actuator can be achieved behind the front panel. The cast-on collar seal can not get lost nor be twisted during installation and allows single-person assembly the actuator is held in the mounting hole by the cast-on seal and can then be fixed by screwing from the rear.

First, snap the lamp socket and contact blocks into the coupling. Then snap the assembly on to the actuator. To release it, the bayonet lever must be pressed prevents inadvertent releasing at the same time .

Screw terminals or cage clamp terminals The RAFIX 22 QR contact blocks are available in two different connection styles as required for your application:

Screw terminals The terminals are open and the captive screws are mounted in the terminal recess. Cage clamp terminals Simply insert a screwdriver to open the terminal, insert the cable and remove the screwdriver to close the terminal.

Your advantage:

This offers you savings in three ways
• Drastically reduced assembly time thanks to wire insertion from the
rear, i.e. no more bending and lateral insertion of the wires required.
• You save material No wire end sleeves are required.
• You save the time previously required for mounting the wire end
sleeves.

RAFIX 22 QR

Easy assembly of RAFIX 22QR.

Screw terminals

Cage clamp terminals

Insert the wire.

Open the terminal.

Sealed for life against humidity and dirt The special seal reliably prevents moisture, oil and dust from penetrating to the contact block. In contrast to other
sealing types which move up and down the shaft, this special seal is firmly seated on the housing.This is why the RAFIX 22QR range offers switching reliability throughout the operating life degree of protection IP 65 to DIN .

Tighten the screw.

Insert the wire.

Done.

Remove the screwdriver.

Versatility of design for customized panels

The RAFIX 22QR system does not only have a particularly low profile as compared to its predecessor and its competitors but is also available in many different versions. Your design options for your customized panels are nearly unlimited thanks to the interchangeable front rings and lenses. In this way you can achieve an attractive design while ensuring safe operation of your equipment at the same time. RAFIX 22QR components are available either with a round or with a square collar. The square version can be mounted in flush fitting rows just like a self-contained pushbutton block. In this way, dirt cannot accumulate between the individual pushbuttons. Your panels will always remain attractive and functionally reliable.

The new RAFIX 22QR control component range meets all the technical requirements and current standards for control gear. All the components have been designed from scratch, with a special view to progressive design and ease of assembly. As a result, we developed a state-ofthe-art product with an optimum cost / benefit ratio.

The system is of modular design. Actuators, contact blocks and lamp sockets can be combined freely. This means that you may implement modifications of design or configuration even at the last minute. An additional positive effect is the reduction of stockholding costs.

Sequence of assembly / disassembly
• Fix the actuator in the front panel
with the ring nut.
• Snap the individual elements
a maximum three contact blocks or two contact blocks together with a lamp socket in the coupling. You can install them on any assembling axis.
• Insert the lamp or LED into the lamp socket.
• Snap the coupling with the contact blocks on to the actuator.
• Connect the cables.
• Disassembly is performed in

Assembly Disassembly

Approvals ing Part no.

BG zert.

VDE 0660
Ordering example Flush pushbutton, illuminated, round collar, without legend, momentary, blue lens Order no.
* For your individual colour combination designs, please refer to the "RAFIX 22QR single parts" chapter for various versions of housings, front rings, lenses and legend inserts.
green /1500
blue /1600

M22x1.5

M22x1.5

RAFIX 22QR pushbuttons, illuminated, plastic front ring
1 q, flush pushbutton

Legending in black letters

Order no. Momentary function

Order no. Latching function

None I
/ Colour no. / Colour no.
/ Colour no.
2 s , flush pushbutton

None I
/ Colour no. / Colour no.
/ Colour no.
3 q, protruding pushbutton 4 s , protruding pushbutton 5 q, protruding collar

None 0

None 0

None
/ Colour no. / Colour no.
/ Colour no.
/ Colour no. / Colour no.
/ Colour no.
/ Colour no.
1...6mm
1...6mm
1...6mm
1...6mm
1...6mm

M22x1.5

M22x1.5 0

M22x1.5
6 s , protruding collar

None
/ Colour no.
1...6mm

M22x1.5

Colour no. for front ring and transparent lens*
Ordering example Flush pushbutton, non-illuminated, round collar, without legend, momentary, blue lens Order no.
* For your individual colour combination designs, please refer to the "RAFIX 22QR single parts" chapter for various versions of housings, front rings, lenses and legend inserts.
green /0500
blue /0600
slate grey /0700

M22x1.5

M22x1.5

RAFIX 22QR pushbuttons, non-illuminated, plastic front ring
1 q, flush pushbutton

Legending in black letters

Order no. Momentary function

None 0 I
/ Colour no. / Colour no. / Colour no. / Colour no.

Order no. Latching function
2 s , flush pushbutton

None
/ Colour no.
/ Colour no.
/ Colour no.
/ Colour no.
3 q, protruding pushbutton 4 s , protruding pushbutton 5 q, protruding collar

None 0 I

None 0 I

None
/ Colour no. / Colour no.
/ Colour no.
/ Colour no.
/ Colour no.
/ Colour no. / Colour no.
/ Colour no.
/ Colour no.
/ Colour no.
/ Colour no.
1...6mm
1...6mm
1...6mm
1...6mm
1...6mm

M22x1.5

M22x1.5 0

M22x1.5
Ordering example Flush pushbutton, non-illuminated, * For your individual colour combination designs, please refer
round collar, without legend, momentary,
to the "RAFIX 22QR single parts" chapter for various versions
black front ring Order no.
of housings, front rings, lenses and legend inserts.
blue /0206
slate grey
/0207
silver
/0208 /0108 /0308 /0408 /0508 /0608 /0708

M 22x1.5

RAFIX 22QR selector switches, illuminated

Function Collar shape
1x45°, momentary

Front ring

Plastic Metallized

Order no.

Order no.

Short handle Long handle
s collar, short handle
2x45°, momentary*

Plastic Metallized
1x 90°, latching

Plastic Metallized
q collar, long handle
2x 90°, latching*

Plastic Metal
1x 90°, latching

Plastic Metallized
2x 60°, latching*

Plastic Metallized
1x 90°, latching*
1x45°, momentary

Plastic Metallized

M 22x1.5

Mark white red yellow green blue

Ring
black /2201
red /2203

Front ring plastic
yellow
Ordering example Selector switch, illuminated, 1 x 45°, momentary, round collar, black plastic front ring, short handle, white handle mark Order no.
*Please use only two contact blocks on left and right position. A third contact block in the middle position may not be mounted.
slate grey /2207
silver /2208

Front ring metal
/2200 /2300 /2400 /2500 /2600

Ring nut with claw included

RAFIX 22QR selector switches, non-illuminated

Function Collar shape
1x45°, momentary

Front ring

Plastic Metallized

Order no.

Order no.

Short handle Long handle
2x45°, momentary*

Plastic
s collar, short handle

Plastic

Metallized

Metallized

M 22x1.5
1x 90°, latching

Plastic Metallized
2x 90°, latching*

Plastic
q collar, long handle

Plastic

Metallized

Metallized

M 22x1.5
1x 90°, latching

Plastic Metallized
2x 60°, latching*

Plastic Metallized
1x 90°, latching*
1x45°, momentary

Plastic Metallized

Colour no. for front ring and opaque handle mark

Mark white red yellow green blue

Ring
Ordering example Selector switch, non-illuminated, 1 x 45°, momentary, round collar, black plastic front ring, short handle, white handle mark Order no.
*Please use only two contact blocks on left and right position. A third contact block in the middle position may not be mounted.
slate grey /0207
silver /0208

Front ring metal
/0200 /0300 /0400 /0500 /0600

Ring nut with claw included

M 22x1.5

RAFIX 22QR keylock switches, metal front ring

Function
1 x 45°, momentary

Key removal position
2 x 45°, momentary*
q collar s collar
1 x 90°, latching
1 x 90°, latching
2 x 90°, latching*
0+I 0+I
0+I 0+I
0+I 0+I
0+2 0+2
0+I+2 0+I+2
2x 60°, latching*
0+I+2 0+I+2

Collar shape

Order no.

M 22x1.5

Lock no. 455, Ronis. Other lock numbers on request.
1 x 90°, latching* 1 x 45°, momentary
0+2 0+2

Lock characteristics metal and plastic front ring

Wafers:

No. of lock types:

Main key:

Group key:
*Please use only two contact blocks on left and right position. A third contact block in the middle position may not be mounted.

Ring nut with claw and 2 keys included.

RAFIX 22QR keylock switches, plastic front ring

Function
1 x 45°, momentary

Key removal position
Ordering example Mushroom-headed pushbutton 40 mm, round collar, silver plastic front ring, black mushroom head Order no.
white /0208 /0200
red /0308 /0300
yellow /0408 /0400
green /0508 /0500
blue /0608 /0600
slate grey /0708 /0700

M22x1.5

RAFIX 22QR emergency stop pushbuttons, dupe-proof to EN 418

Order no. Non-illuminated

Order no. Illuminated
/0300
2 with indicator acc. to EN 81
/0300
3 with keylock
/0300
4 beleuchtbar
/0300

M 22x1.5

M22x1.5

M 22x1.5

M 22x1.5

The emergency stop pushbuttons meet the requirements of DIN EN 60 204, IEC 73, IEC 204, IEC 947, DIN EN 60 947, VDE 0660 Part 200 and VDE 0113 Part They are dupe-proof according to EN 418 thanks to the positive-action mechanical movement sequence. To prevent inadvertent actuation, a certain operating force must be exerted at the action point.

The button latches when being pressed and can be reset by turning to the right or left. Due to the design of the actuating element the emergency stop switch is protected against interlocking, i.e. a started emergency stop process cannot be interrupted by jamming elements.

The green ring below the actuator shows the switching position of the pushbutton it can not be seen any more when the pushbutton is pressed.

Emergency stop label plates see accessories.

Ring nut with claw included, 3 2 keys included

Switching position indication according EN 81

According to this norm the switching position of an emergency stop pushbutton must be visible from the front and from the side.

The Rafi pushbutton position 2 has a mechanical indicator at the top which changes from green to red, when actuated. The green ring shows the switching position from the side.
not actuated
actuated

RAFIX 22QR signal indicators
1 q collar

Order no. Labelling with legend inserts*

Order no. No labelling
1...6mm

M22x1.5
2 s collar
/ Colour no.
/ Colour no.
Ordering example Signal indicator, round collar, no labelling, blue Order no.
red transparent /1300 /2300
yellow transparent /1400 /2400
green transparent /1500 /2500
blue transparent /1600 /2600

RAFIX 22QR lamp sockets with coupling, screw terminals

Version

Switching symbol

Lamp socket BA 9 s
250 V / 2 W

Order no.

Lamp socket BA 9 s X1 with diode and
series resistor
250 V / 130 V / 2 W

RAFIX 22QR lamp sockets without coupling, screw terminals

Version

Switching symbol

Lamp socket
250 V / 2 W

Lamp socket X1
with diode and
series resistor
250 V / 130 V / 2 W

For lamps and LEDs, refer to accessories page.

Order no.

Accessory

Coupling

RAFIX 22QR contact blocks complete with coupling, screw terminals

Example 1 NO contact, silver, 250 V

Version 1 NC contact 1 NO contact
1 NC, 1 NC

Reference no. Switching symbol on coupling

Order no. silver 250 V
1 NO, 1 NO
1 NO, 1 NC

RAFIX 22QR contact blocks and lamp sockets complete with coupling, screw terminals

Example 1 NC contact, silver, 250 V, 1 lamp socket

Version
1 NC, 1 lamp socket
1 NO contact, 1 lamp socket

Reference no. Switching symbol on coupling
More datasheets: MU18-10FFBK (BULK) | MU14-8FFBK | PT7M1818-5TE | PT7M1818-20TE | PT7M1818-10TE | PT7M1813-10TE | PT7M1818-20TEX | PT7M1818-10TEX | PT7M1813-10TEX | PT7M1818-5TEX


Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 5.49263.0140200 Datasheet file may be downloaded here without warranties.

Datasheet ID: 5.49263.0140200 522621