FHP3392IMTC24
FHP3392IMTC24 Datasheet
FHP3392 Fixed-Gain, ±5V, Triple 2:1, High-Speed Video Multiplexer
| Part | Datasheet |
|---|---|
FHP3392IMTC24 |
FHP3392IMTC24 (pdf) |
| Related Parts | Information |
|---|---|
|
FHP3392IMTC24X |
FHP3392IMTC24X |
| PDF Datasheet Preview |
|---|
| FHP3392 Fixed-Gain, ±5V, Triple 2:1, High-Speed Video Multiplexer July 2007 FHP3392 Fixed-Gain, ±5V, Triple 2:1, High-Speed Video Multiplexer 0.1dB gain flatness to 102MHz at 2VPP 9ns channel switching time differential gain/phase error 750MHz large signal -3dB bandwidth 2,600V/us slew rate 60mA output current easily drives two video loads 70dB channel to channel isolation 25mA supply current 7mA supply current when disabled Fully specified at ±5V supplies Lead-free TSSOP-24 package RGB video switchers and routers Multiple input HDTV switching Picture-in-picture video switch Multi-channel ADC Driver The FHP3392 G=2 is a triple 2:1 analog multiplexer designed for high-speed video applications. The output amplifiers offer a fixed gain of 6dB and stellar large signal performance of 335MHz -3dB bandwidth and 80MHz 0.1dB bandwidth. The 2VPP bandwidth performance and 1,600V/us slew rate exceed the requirements of high-definition television HDTV and other multimedia applications. The output amplifier provides ample output current to drive multiple video loads. The FHP3392 may be operated with dual power supplies from ±2.5V to ±6V. The FHP3392 consumes only 25mA of supply current and offer disable capability. While disabled, it consumes only 7mA and the outputs become high impedance, allowing multiplexer expansion with multiple FHP3392s. Ordering Information PbFree FHP3392IMTC24X Yes Gain 6dB Operating Temperature Range Package -40°C to +85°C 24-Lead,Thin Shrink Outline Package, JEDEC MO-153, 4.4mm Wide Packing Method Tape and Reel Moisture sensitivity level for all parts is MSL-1. FHP3392 Fixed-Gain, ±5V, Triple 2:1, High-Speed Video Multiplexer Block Diagram and Pin Configuration Figure Block Diagram and Pin Configuration Pin Definitions Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Name IN1A DGND IN2A GND 1N3A +Vs -Vs IN3B GND IN2B GND IN1B +VS +DVs -VS OUT3 +Vs OUT3 -VS OUT1 +VS SEL A/B EN +VS Description 1st Input Channel A Digital Ground, must be connected to ground 2nd Input Channel A Must be connected to ground 3rd Input Channel A Positive supply Negative supply 3rd Input Channel B Must be connected to ground 2nd Input Channel B Must be connected to ground 1st Input Channel B Positive supply Digital positive supply Negative supply 3rd output Positive supply 2nd output Negative supply 1st Output Logic input “0” = Channel A, “1” = Channel B Enable pin “0” = Enable, “1” = Disable Enabled if left floating or grounded Enable Pin “0” = Channel A, “1” = Channel B Positive supply Truth Table SEL A / B 0 1 X Channel A Channel B Disable 2006 Fairchild Semiconductor Corporation FHP3392 Fixed-Gain, ±5V, Triple 2:1, High-Speed Video Multiplexer Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VIN Parameter Supply Voltage Input Voltage Range Min. 0 Max. +VS + 0.5V Unit V Electrostatic Discharge Protection Symbol ESD Parameter Human Body Model HBM Charged Device Model CDM Min. Max. 3 12 Unit kV Reliability Information Parameter Min. |
| More datasheets: 7343-2USOC/H2/S530-A5 | 9782 | 9750 | 9780 | 9700 | FAN1589MX | FAN1589MCX | FAN1589DX | S558-5999-86-F | S558-5999-54-F |
Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived FHP3392IMTC24 Datasheet file may be downloaded here without warranties.