9780

9780 Datasheet

09780 Ring Terminal Banana Jack

Part	Datasheet
9780	9780 (pdf)

Related Parts	Information
9782	9782
9750	9750
9700	9700

PDF Datasheet Preview
Banana Plug Adapters Home Promotions Products On-Line Catalog Banana Plug Adapters Technical EMail Address: Password Forgot Me? Remember me Registe Services Sales Reps & Distributors ESD Information SEARCH \| CATALOG HOME Features and Benefits: z All adapters designed to accept standard banana plug z Made in America P/N Description 09700 Alligator Clip 09750 Large Clip 32 thread with Banana Jack 10-32 1/2" threaded hole accepts standard banana plug 09780 Ring Terminal Banana Jack 09782 Stacking Snap Banana Jack, 10mm Snap and 10mm Socket NOTE: Per ESD "Provisions may be made to include a resistor where it may be required for a purpose other than ESD." 12/02/2006 Banana Plug Adapters ESD Handbook TR paragraph Basic Grounding Requirements "The first step in ensuring that everything in an EPA is at the same electrical potential is to ground all conductive components of the work area worksurfaces, people, equipment, etc. to the same electrical ground point. This point is called the common point ground. The next step in completing the ground circuit is to connect the common point ground to the equipment ground third wire, green " One Megohm resistor is required in wrist straps, however, the recommended practice is hard ground per ANSI/EOS/ESD S6.1 that is no resistor between the common point ground terminal and a worksurface, floor mat, or shelving. Per ANSI/ESD S20.20 Table 1 Grounding System Technical Requirement, the Recommended Range is less than 1 ohm AC impedance. West Coast 3651 Walnut Ave., Chino, CA 91710 Phone 909 627-8178 Fax 909 627-7449

PDF Datasheet Preview

Banana Plug Adapters

Home

Promotions Products

On-Line Catalog

Banana Plug Adapters

Technical

EMail Address:

Password Forgot Me?

Remember me

Registe

Services

Sales Reps & Distributors

ESD Information

SEARCH | CATALOG HOME

Features and Benefits:
z All adapters designed to accept standard banana plug
z Made in America

P/N Description
09700 Alligator Clip
09750

Large Clip 32 thread
with

Banana

Jack
10-32
1/2"
threaded
hole
accepts
standard
banana
plug
09780 Ring Terminal Banana Jack
09782 Stacking Snap Banana Jack, 10mm Snap and 10mm Socket

NOTE:

Per ESD "Provisions may be made to include a resistor where it may be required for a purpose other than ESD."
12/02/2006

Banana Plug Adapters

ESD Handbook TR paragraph Basic Grounding Requirements "The first step in ensuring that everything in an EPA is at the same electrical potential is to ground all conductive components of the work area worksurfaces, people, equipment, etc. to the same electrical ground point. This point is called the common point ground. The next step in completing the ground circuit is to connect the common point ground to the equipment ground third wire, green "

One Megohm resistor is required in wrist straps, however, the recommended practice is hard ground per ANSI/EOS/ESD S6.1 that is no resistor between the common point ground terminal and a worksurface, floor mat, or shelving. Per ANSI/ESD S20.20 Table 1 Grounding System Technical Requirement, the Recommended Range is less than 1 ohm AC impedance.

West Coast 3651 Walnut Ave., Chino, CA 91710 Phone 909 627-8178 Fax 909 627-7449

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 9780 Datasheet file may be downloaded here without warranties.

9780

9780 Datasheet

Datasheet ID: 9780 508541