DM74150N

DM74150N Datasheet

DM74150 Data Selectors/Multiplexers

Part	Datasheet
DM74150N	DM74150N (pdf)

PDF Datasheet Preview
DM74150 Data Selectors/Multiplexers DM74150 Data Selectors/Multiplexers These data selectors/multiplexers contain full on-chip decoding to select the desired data source. The DM74150 selects one-of-sixteen data sources. The DM74150 has a strobe input which must be at a LOW logic level to enable these devices. A HIGH level at the strobe forces the W output HIGH and the Y output as applicable LOW. The DM74150 features an inverted W output only. s 150 selects one-of-sixteen data lines s Performs parallel-to-serial conversion s Permits multiplexing from N lines to one line s Also for use as Boolean function generator s Typical average propagation delay time, data input to W output 11 ns s Typical power dissipation 200 mW Ordering Code: Order Number Package Number Package Description DM74150N N24A 24-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-011, Wide Connection Diagram Function Table Inputs Outputs Select Strobe H = HIGH Level L = LOW Level X = Don’t Care E0, E1 = the complement of the level of the respective E input 2001 Fairchild Semiconductor Corporation DS006546 DM74150 Logic Diagram DM74150 Absolute Maximum Ratings Note 1 Supply Voltage Input Voltage 5.5V Operating Free Air Temperature Range 0°C to +70°C Storage Temperature Range −65°C to +150°C Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Recommended Operating Conditions VCC VIH VIL IOH IOL TA Parameter Supply Voltage HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Current LOW Level Output Current Free Air Operating Temperature Electrical Characteristics over recommended operating free air temperature range unless otherwise noted Parameter Conditions Input Clamp Voltage VCC = Min, II = −12 mA HIGH Level Output Voltage LOW Level Output Voltage VCC = Min, IOH = Max VIL = Max, VIH = Min

PDF Datasheet Preview

DM74150 Data Selectors/Multiplexers

DM74150 Data Selectors/Multiplexers

These data selectors/multiplexers contain full on-chip decoding to select the desired data source. The DM74150 selects one-of-sixteen data sources. The DM74150 has a strobe input which must be at a LOW logic level to enable these devices. A HIGH level at the strobe forces the W output HIGH and the Y output as applicable LOW.

The DM74150 features an inverted W output only.
s 150 selects one-of-sixteen data lines s Performs parallel-to-serial conversion s Permits multiplexing from N lines to one line s Also for use as Boolean function generator s Typical average propagation delay time, data input to W
output 11 ns s Typical power dissipation 200 mW
Ordering Code:

Order Number Package Number

Package Description

DM74150N

N24A
24-Lead Plastic Dual-In-Line Package PDIP , JEDEC MS-011, Wide

Connection Diagram

Function Table

Inputs

Outputs

Select

Strobe

H = HIGH Level L = LOW Level X = Don’t Care

E0, E1 = the complement of the level of the respective E input
2001 Fairchild Semiconductor Corporation DS006546

DM74150

Logic Diagram

DM74150

Absolute Maximum Ratings Note 1

Supply Voltage

Input Voltage
5.5V

Operating Free Air Temperature Range 0°C to +70°C

Storage Temperature Range
−65°C to +150°C

Note 1 The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.

Recommended Operating Conditions

VCC VIH VIL IOH IOL TA

Parameter Supply Voltage HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Current LOW Level Output Current Free Air Operating Temperature

Electrical Characteristics
over recommended operating free air temperature range unless otherwise noted

Parameter

Conditions

Input Clamp Voltage

VCC = Min, II = −12 mA

HIGH Level

Output Voltage

LOW Level

Output Voltage

VCC = Min, IOH = Max

VIL = Max, VIH = Min

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived DM74150N Datasheet file may be downloaded here without warranties.

Datasheet ID: DM74150N 513619