M5211DEMO

M5211DEMO Datasheet

Document Number M5211DEMO Rev. 1, 04/2007

Part	Datasheet
M5211DEMO	M5211DEMO (pdf)

PDF Datasheet Preview
Freescale Semiconductor Demonstration Board for Freescale MCF5211 The M5211DEMO is a low-cost development system for the Freescale MCF5211 microcontroller. Application development is quick and easy with the included DB9 serial cable and integrated BDM. The integrated BDM is compatible with popular hosting software and allows easy application development and debugging. An optional BDM port compatible with standard ColdFire BDM / JTAG interface cables and hosting software is provided but not installed. Contents 1 Overview 1 2 Getting Started 5 3 Software Development 5 4 Operating Modes 5 Memory Map 6 Development Support 7 Power 8 Reset 11 9 Low-Power Modes. 12 10 Timing 12 11 Communications 13 12 User Options 14 13 I/O Port Connector. 16 Freescale Semiconductor, Inc., All rights reserved. Overview Figure M5211DEMO Board • MCF5211 CPU, 64 pins 128 byte flash 16K byte RAM 2K byte cache RAM DMA controller with timers Interrupt controller Eight channel 12 bit A/D QSPI, IIC, and CAN serial ports 1 x UART Serial Ports with DMA capability Edge / interrupt port Eight PWM timers Four GPT timers BDM / JTAG port V operation 66 MHz bus • 40 pin I/O port • Integrated USB BDM port • BDM / JTAG port, 26 pins, development port not installed Freescale Semiconductor • RS-232 serial port with DB9-S connector • Timing options Internal oscillator, 8 MHz External XTAL option not installed External clock options not installed • RESET switch with indicator • ON/OFF Power Switch w/ LED indicator • Power input selection jumper Power input from USB BDM Power input from on-board, V, regulator Power input from terminal block Power from connector J1 Optional power output through connector J1 • User features Four user LEDs with enable jumper Two user push switches 5 kΩ POT with enable jumper • Option jumpers Power input select Optional power output Enable BDM_EN XTAL_EN POT_EN COM_EN LED_EN • Connectors DB9 serial connector Type B USB connector mm barrel power input 2 pos, screw type, terminal block • Supplied with DB9 serial cable, USB cable, utility / support CD • Manuals and wall adapter power supply. Specifications • Board size x • Power input +5 to +20 VDC, 9 VDC typical • Current consumption 100 mA typical at 9 VDC input Freescale Semiconductor Overview 3 Overview Reference Documents Table 1 shows a list of reference documents that are provided on the support CD in Adobe Portable Document Format PDF . Table Reference Documents File name M5211DEEMO_UG.pdf M5211DEMO_SCH_E.pdf M5211DEMO_QSG.pdf M5211DEMO_example1.zip M5211DEMO_example2.zip MCF5213RM.pdf MCF5213DE.pdf Cautionary Notes Electrostatic discharge ESD prevention measures must be used when handling this product. ESD damage is not a warranty repair item. The manufacturer of this board, Axiom Manufacturing, does not assume any liability arising out of the application or use of any product or circuit described herein neither does it convey any license under patent rights or the rights of others. EMC Information on the M5211DEMO board This product is shipped from the factory with associated power supplies and cables, and has been verified to meet with requirements FCC as a CLASS A product. This product is designed and intended for use as a development platform for hardware or software in an educational or professional laboratory. In a domestic environment, this product may cause radio interference in which case you may be required to take adequate prevention measures. Attaching additional wiring to this product or modifying the product operation from the factory default as shipped may effect its performance and cause interference with other apparatus in the immediate vicinity. If such interference is detected, suitable mitigating measures must be taken. Terminology This development board uses option selection jumpers. A jumper is a plastic shunt that connects two terminals electrically. Terminology for application of the option jumpers is as follows: • Jumper on, in, or is installed such that two pins are connected. • Jumper off, out, or jumper is installed on one pin only. It is recommended that jumpers be idled by installing on 1 pin so they will not be lost. Freescale Semiconductor Getting Started 2 Getting Started To get started, please refer to the M5211 Quick Start Guide included with this development kit. The M5211DEMO single board computer is a fully assembled, fully functional development board for the Freescale MCF5211 microcontroller. An included serial cable, USB cable, and support software allows you to get started quickly. The purpose of this development board is to assist you in quickly developing an application in a known working environment, to provide an evaluation platform, or as a control module for an embedded system. You should be familiar with memory mapping, memory types, and embedded software design for successful application development. You should be familiar with the hardware and software operation of the target MCF5211 device before beginning. If necessary, refer to the MCF5213 Integrated Microcontroller Reference Manual, included on the support CD, for details on the operation of the MCF5211.

PDF Datasheet Preview

Freescale Semiconductor

Demonstration Board for Freescale MCF5211

The M5211DEMO is a low-cost development system for the Freescale MCF5211 microcontroller. Application development is quick and easy with the included DB9 serial cable and integrated BDM. The integrated BDM is compatible with popular hosting software and allows easy application development and debugging. An optional BDM port compatible with standard ColdFire BDM / JTAG interface cables and hosting software is provided but not installed.

Contents
1 Overview 1 2 Getting Started 5 3 Software Development 5 4 Operating Modes 5 Memory Map 6 Development Support 7 Power 8 Reset 11 9 Low-Power Modes. 12 10 Timing 12 11 Communications 13 12 User Options 14 13 I/O Port Connector. 16

Freescale Semiconductor, Inc., All rights reserved.

Overview

Figure M5211DEMO Board
• MCF5211 CPU, 64 pins 128 byte flash 16K byte RAM 2K byte cache RAM DMA controller with timers Interrupt controller Eight channel 12 bit A/D QSPI, IIC, and CAN serial ports 1 x UART Serial Ports with DMA capability Edge / interrupt port Eight PWM timers Four GPT timers BDM / JTAG port V operation 66 MHz bus
• 40 pin I/O port
• Integrated USB BDM port
• BDM / JTAG port, 26 pins, development port not installed

Freescale Semiconductor
• RS-232 serial port with DB9-S connector
• Timing options

Internal oscillator, 8 MHz External XTAL option not installed External clock options not installed
• RESET switch with indicator
• ON/OFF Power Switch w/ LED indicator
• Power input selection jumper Power input from USB BDM Power input from on-board, V, regulator Power input from terminal block Power from connector J1 Optional power output through connector J1
• User features Four user LEDs with enable jumper Two user push switches 5 kΩ POT with enable jumper
• Option jumpers Power input select Optional power output Enable BDM_EN XTAL_EN POT_EN COM_EN LED_EN
• Connectors DB9 serial connector Type B USB connector mm barrel power input 2 pos, screw type, terminal block
• Supplied with DB9 serial cable, USB cable, utility / support CD
• Manuals and wall adapter power supply.

Specifications
• Board size x
• Power input +5 to +20 VDC, 9 VDC typical
• Current consumption 100 mA typical at 9 VDC input

Freescale Semiconductor

Overview 3

Overview

Reference Documents

Table 1 shows a list of reference documents that are provided on the support CD in Adobe Portable Document Format PDF .

Table Reference Documents

File name M5211DEEMO_UG.pdf M5211DEMO_SCH_E.pdf M5211DEMO_QSG.pdf M5211DEMO_example1.zip M5211DEMO_example2.zip MCF5213RM.pdf MCF5213DE.pdf

Cautionary Notes

Electrostatic discharge ESD prevention measures must be used when handling this product. ESD damage is not a warranty repair item.

The manufacturer of this board, Axiom Manufacturing, does not assume any liability arising out of the application or use of any product or circuit described herein neither does it convey any license under patent rights or the rights of others.

EMC Information on the M5211DEMO board

This product is shipped from the factory with associated power supplies and cables, and has been verified to meet with requirements FCC as a CLASS A product.

This product is designed and intended for use as a development platform for hardware or software in an educational or professional laboratory.

In a domestic environment, this product may cause radio interference in which case you may be required to take adequate prevention measures.

Attaching additional wiring to this product or modifying the product operation from the factory default as shipped may effect its performance and cause interference with other apparatus in the immediate vicinity. If such interference is detected, suitable mitigating measures must be taken.

Terminology

This development board uses option selection jumpers. A jumper is a plastic shunt that connects two terminals electrically. Terminology for application of the option jumpers is as follows:
• Jumper on, in, or is installed such that two pins are connected.
• Jumper off, out, or jumper is installed on one pin only. It is recommended that jumpers be
idled by installing on 1 pin so they will not be lost.

Freescale Semiconductor

Getting Started
2 Getting Started

To get started, please refer to the M5211 Quick Start Guide included with this development kit.

The M5211DEMO single board computer is a fully assembled, fully functional development board for the Freescale MCF5211 microcontroller. An included serial cable, USB cable, and support software allows you to get started quickly.

The purpose of this development board is to assist you in quickly developing an application in a known working environment, to provide an evaluation platform, or as a control module for an embedded system. You should be familiar with memory mapping, memory types, and embedded software design for successful application development.

You should be familiar with the hardware and software operation of the target MCF5211 device before beginning. If necessary, refer to the MCF5213 Integrated Microcontroller Reference Manual, included on the support CD, for details on the operation of the MCF5211.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived M5211DEMO Datasheet file may be downloaded here without warranties.

Datasheet ID: M5211DEMO 635513