MK24FN256VDC12

MK24FN256VDC12 Datasheet

MK24FN256VDC12

Part	Datasheet
MK24FN256VDC12	MK24FN256VDC12 (pdf)

PDF Datasheet Preview
Freescale Semiconductor, Inc. Data Sheet Technical Data Kinetis K24F Sub-Family 256 KB Flash Data Sheet 120 MHz Microcontroller with FPU The K24F product family features high memory densities, low power capabilities, and optimized integration. It shares the comprehensive enablement and scalability of the Kinetis family. This product offers • 1-1 flash to RAM ratio, with 256 KB of embedded flash and 256 KB of embedded RAM to support application with high RAM density requirements. • USB LS/FS OTG with embedded V, 120 mA LDO voltage regulator and USB device crystal-less operation. • Run power consumption down to 220 uA/MHz. Static power consumption down to uA with full state retention and 5 us wakeup. Lowest Static mode down to 173 nA MK24FN256VDC12 121 XFBGA 8 x 8 x mm Pitch mm Performance Communication interfaces • Up to 120 MHz core with DSP • USB full-/low-speed On-the-Go controller instructions and floating point unit • USB Device Charger detect USBDCD • Three SPI modules Memories and memory interfaces • Three I2C modules • Up to 256 KB program flash memory and 256 KB RAM • Six UART modules • Serial programming interface EzPort • I2S module • Pre-programmed Kinetis flashloader for one-time, in- system factory programming Timers System peripherals • Two 8-channel motor control/general purpose/PWM timers • Multiple low-power modes, low-leakage wakeup unit • Two 2-channel quadrature decoder/general purpose • 16-channel DMA controller timers • External watchdog monitor • Periodic interrupt timers and 16-bit low power timer • Software watchdog • Carrier modulator transmitter Clocks • 3 to 32 MHz and 32 kHz crystal oscillator • Real-time clock • Programmable delay block • Multipurpose clock generator with FLL and PLL Security and integrity modules • 32 kHz, and 4 MHz internal reference clock • Hardware CRC module • 48 MHz internal reference • 128-bit unique identification ID number per chip Analog modules • Two 16-bit SAR ADCs • 12-bit DAC • Two analog comparators CMP • Voltage reference Ordering Information 1 Flash 256 KB Memory SRAM KB 256 Maximum number of 83 To confirm current availability of ordererable part numbers, go to and perform a part number search. Related Resources Type Selector Guide Product Brief Reference Manual Data Sheet Package drawing The Freescale Solution Advisor is a web-based tool that features interactive application wizards and a dynamic product selector. The Product Brief contains concise overview/summary information to enable quick evaluation of a device for design suitability. The Reference Manual contains a comprehensive description of the structure and function operation of a device. The Data Sheet includes electrical characteristics and signal connections. Package dimensions are provided in package drawings. Resource Solution Advisor K60PB1 K24P121M120SF5RM 1 This document XFBGA 121-pin 98ASA00595D1 To find the associated resource, go to and perform a search using this term. 2 Freescale Semiconductor, Inc. ARM Cortex -M4 Core Debug interfaces Interrupt controller Floating point Security and Integrity Random number generator Analog 16-bit ADC x2 Analog comparator 6-bit DAC x2 12-bit DAC x1 Voltage reference Kinetis K24 Family System Internal and external watchdogs Memories and Memory Interfaces Program flash Serial programming interface Low-leakage wakeup Clocks Phaselocked loop Frequencylocked loop 45 Inter-Integrated Circuit Interface I2C timing...... 47 UART switching 49 I2S switching 4 55 Obtaining package 55 5 55 K24 Signal Multiplexing and Pin Assignments.................55 Unused analog 60 K24 61 Ordering Determining valid orderable parts........................62 Part 63 Terminology and Definition Operating requirement........................64 Definition Operating behavior............................. 65 Definition 65 Definition 65 Result of exceeding a rating................................ 66 Relationship between ratings and operating Guidelines for ratings and operating 4 Freescale Semiconductor, Inc. Ratings 1 Ratings Thermal handling ratings Symbol TSTG TSDR Description Storage temperature Solder temperature, lead-free Solder temperature, leaded Min. Max. 150 260 245 Unit Notes Determined according to JEDEC Standard JESD22-A103, High Temperature Storage Life. Determined according to IPC/JEDEC Standard J-STD-020, Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices. Moisture handling ratings Symbol Description MSL Moisture sensitivity level Min. Max. 3 Unit Notes Determined according to IPC/JEDEC Standard J-STD-020, Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices. ESD handling ratings Symbol VHBM VCDM ILAT Electrostatic discharge voltage, human body model Electrostatic discharge voltage, charged-device model Latch-up current at ambient temperature of 70 °C Min. -2000 -500 -100 Max. +2000 +500 +100 Unit V Notes 1 2 Determined according to JEDEC Standard JESD22-A114, Electrostatic Discharge ESD Sensitivity Testing Human Body Model HBM . Determined according to JEDEC Standard JESD22-C101, Field-Induced Charged-Device Model Test Method for Electrostatic-Discharge-Withstand Thresholds of Microelectronic Components. Determined according to JEDEC Standard JESD78, IC Latch-Up Test. Voltage and current operating ratings 5 Freescale Semiconductor, Inc. General VDD IDD VDIO VAIO ID VDDA VUSB0_DP VUSB0_DM VBAT Description Digital supply voltage Digital supply current Digital input voltage except RESET, EXTAL, and XTAL Analog1, RESET, EXTAL, and XTAL input voltage Maximum current single pin limit applies to all digital pins Analog supply voltage USB0_DP input voltage USB0_DM input voltage RTC battery supply voltage Min. VDD Max. 185 VDD + VDD + 25 VDD + Ordering parts Determining valid orderable parts Valid orderable part numbers are provided on the web. To determine the orderable part numbers for this device, go to freescale.com and perform a part number search for the following device numbers PK24 and MK24 62 Freescale Semiconductor, Inc. Pinout Part identification Description Part numbers for the chip have fields that identify the specific part. You can use the values of these fields to determine the specific part you have received. Format Part numbers for this device have the following format Q K## A M FFF R T PP CC N Fields This table lists the possible values for each field in the part number not all combinations are valid : Field Q K## A M FFF Description Qualification status Kinetis family Key attribute Flash memory type Program flash memory size Values • M = Fully qualified, general market flow • P = Prequalification • SC = Fully qualified, special part • K24 • D = Cortex-M4 w/ DSP • F = Cortex-M4 w/ DSP and FPU • N = Program flash only • X = Program flash and FlexMemory • 32 = 32 KB • 64 = 64 KB • 128 = 128 KB • 256 = 256 KB • 512 = 512 KB • 1M0 = 1 MB • 2M0 = 2 MB • V = to 105 • C = to 85 • U to +70 °C Table continues on the next page... 63 Freescale Semiconductor, Inc. Pinout Field PP Description Package identifier Maximum CPU frequency MHz Packaging type Values • FM = 32 QFN 5 mm x 5 mm • FT = 48 QFN 7 mm x 7 mm • LF = 48 LQFP 7 mm x 7 mm • LH = 64 LQFP 10 mm x 10 mm • MP = 64 MAPBGA 5 mm x 5 mm • LK = 80 LQFP 12 mm x 12 mm • LL = 100 LQFP 14 mm x 14 mm • MC = 121 MAPBGA 8 mm x 8 mm • DC = 121 XFBGA 8 mm x 8 mm x mm • LQ = 144 LQFP 20 mm x 20 mm • MD = 144 MAPBGA 13 mm x 13 mm • 5 = 50 MHz • 7 = 72 MHz • 10 = 100 MHz • 12 = 120 MHz • 15 = 150 MHz • 16 = 168 MHz • 18 = 180 MHz • R = Tape and reel • Blank = Trays Example This is an example part number MK24FN256VDC12 Terminology and guidelines Definition Operating requirement An operating requirement is a specified value or range of values for a technical characteristic that you must guarantee during operation to avoid incorrect operation and possibly decreasing the useful life of the chip. Example This is an example of an operating requirement: 64 Freescale Semiconductor, Inc. Symbol VDD Min. V core supply voltage Max. Pinout

PDF Datasheet Preview

Freescale Semiconductor, Inc. Data Sheet Technical Data

Kinetis K24F Sub-Family 256 KB Flash Data Sheet
120 MHz Microcontroller with FPU

The K24F product family features high memory densities, low power capabilities, and optimized integration. It shares the comprehensive enablement and scalability of the Kinetis family.

This product offers
• 1-1 flash to RAM ratio, with 256 KB of embedded flash and 256 KB of embedded RAM to support application with high RAM density requirements.
• USB LS/FS OTG with embedded V, 120 mA LDO voltage regulator and USB device crystal-less operation.
• Run power consumption down to 220 uA/MHz. Static power consumption down to uA with full state retention and 5 us wakeup. Lowest Static mode down to 173 nA

MK24FN256VDC12
121 XFBGA 8 x 8 x mm Pitch mm

Performance

Communication interfaces
• Up to 120 MHz core with DSP
• USB full-/low-speed On-the-Go controller
instructions and floating point unit
• USB Device Charger detect USBDCD
• Three SPI modules

Memories and memory interfaces
• Three I2C modules
• Up to 256 KB program flash memory and 256 KB RAM
• Six UART modules
• Serial programming interface EzPort
• I2S module
• Pre-programmed Kinetis flashloader for one-time, in-
system factory programming

Timers

System peripherals
• Two 8-channel motor control/general purpose/PWM timers
• Multiple low-power modes, low-leakage wakeup unit
• Two 2-channel quadrature decoder/general purpose
• 16-channel DMA controller
timers
• External watchdog monitor
• Periodic interrupt timers and 16-bit low power timer
• Software watchdog
• Carrier modulator transmitter

Clocks
• 3 to 32 MHz and 32 kHz crystal oscillator
• Real-time clock
• Programmable delay block
• Multipurpose clock generator with FLL and PLL

Security and integrity modules
• 32 kHz, and 4 MHz internal reference clock
• Hardware CRC module
• 48 MHz internal reference
• 128-bit unique identification ID number per chip

Analog modules
• Two 16-bit SAR ADCs
• 12-bit DAC
• Two analog comparators CMP
• Voltage reference
Ordering Information 1

Flash 256 KB

Memory

SRAM KB 256

Maximum number of 83

To confirm current availability of ordererable part numbers, go to and perform a part number search.

Related Resources

Type Selector Guide Product Brief

Reference Manual Data Sheet

Package drawing

The Freescale Solution Advisor is a web-based tool that features interactive application wizards and a dynamic product selector.

The Product Brief contains concise overview/summary information to enable quick evaluation of a device for design suitability.

The Reference Manual contains a comprehensive description of the structure and function operation of a device.

The Data Sheet includes electrical characteristics and signal connections.

Package dimensions are provided in package drawings.

Resource Solution Advisor K60PB1 K24P121M120SF5RM 1 This document XFBGA 121-pin 98ASA00595D1

To find the associated resource, go to and perform a search using this term.
2 Freescale Semiconductor, Inc.

ARM Cortex -M4 Core

Debug interfaces

Interrupt controller

Floating point

Security and Integrity

Random number generator

Analog
16-bit ADC x2

Analog comparator
6-bit DAC x2
12-bit DAC x1

Voltage reference

Kinetis K24 Family

System

Internal and external watchdogs

Memories and Memory Interfaces

Program flash

Serial programming
interface

Low-leakage wakeup

Clocks

Phaselocked loop

Frequencylocked loop
45 Inter-Integrated Circuit Interface I2C timing...... 47 UART switching 49 I2S switching 4 55 Obtaining package 55 5 55 K24 Signal Multiplexing and Pin Assignments.................55 Unused analog 60 K24 61 Ordering Determining valid orderable parts........................62 Part 63 Terminology and Definition Operating requirement........................64 Definition Operating behavior............................. 65 Definition 65 Definition 65 Result of exceeding a rating................................ 66 Relationship between ratings and operating

Guidelines for ratings and operating
4 Freescale Semiconductor, Inc.

Ratings
1 Ratings

Thermal handling ratings

Symbol TSTG TSDR

Description Storage temperature Solder temperature, lead-free Solder temperature, leaded

Min.

Max. 150 260 245

Unit

Notes

Determined according to JEDEC Standard JESD22-A103, High Temperature Storage Life. Determined according to IPC/JEDEC Standard J-STD-020, Moisture/Reflow Sensitivity Classification for Nonhermetic

Solid State Surface Mount Devices.

Moisture handling ratings

Symbol Description MSL Moisture sensitivity level

Min.

Max. 3

Unit

Notes

Determined according to IPC/JEDEC Standard J-STD-020, Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices.

ESD handling ratings

Symbol VHBM VCDM

ILAT

Electrostatic discharge voltage, human body model Electrostatic discharge voltage, charged-device model Latch-up current at ambient temperature of 70 °C

Min. -2000 -500
-100

Max. +2000 +500
+100

Unit V

Notes 1 2

Determined according to JEDEC Standard JESD22-A114, Electrostatic Discharge ESD Sensitivity Testing Human Body Model HBM .

Determined according to JEDEC Standard JESD22-C101, Field-Induced Charged-Device Model Test Method for Electrostatic-Discharge-Withstand Thresholds of Microelectronic Components.

Determined according to JEDEC Standard JESD78, IC Latch-Up Test.

Voltage and current operating ratings
5 Freescale Semiconductor, Inc.

General

VDD IDD VDIO VAIO ID VDDA VUSB0_DP VUSB0_DM VBAT

Description Digital supply voltage Digital supply current Digital input voltage except RESET, EXTAL, and XTAL Analog1, RESET, EXTAL, and XTAL input voltage Maximum current single pin limit applies to all digital pins Analog supply voltage USB0_DP input voltage USB0_DM input voltage RTC battery supply voltage

Min. VDD

Max. 185 VDD + VDD + 25 VDD +
Ordering parts

Determining valid orderable parts

Valid orderable part numbers are provided on the web. To determine the orderable part numbers for this device, go to freescale.com and perform a part number search for the following device numbers PK24 and MK24
62 Freescale Semiconductor, Inc.

Pinout

Part identification

Description Part numbers for the chip have fields that identify the specific part. You can use the values of these fields to determine the specific part you have received.

Format Part numbers for this device have the following format Q K## A M FFF R T PP CC N

Fields

This table lists the possible values for each field in the part number not all combinations are valid :

Field Q K## A M FFF

Description Qualification status Kinetis family Key attribute Flash memory type Program flash memory size

Values
• M = Fully qualified, general market flow
• P = Prequalification
• SC = Fully qualified, special part
• K24
• D = Cortex-M4 w/ DSP
• F = Cortex-M4 w/ DSP and FPU
• N = Program flash only
• X = Program flash and FlexMemory
• 32 = 32 KB
• 64 = 64 KB
• 128 = 128 KB
• 256 = 256 KB
• 512 = 512 KB
• 1M0 = 1 MB
• 2M0 = 2 MB
• V = to 105
• C = to 85
• U to +70 °C

Table continues on the next page...
63 Freescale Semiconductor, Inc.

Pinout

Field PP

Description Package identifier

Maximum CPU frequency MHz

Packaging type

Values
• FM = 32 QFN 5 mm x 5 mm
• FT = 48 QFN 7 mm x 7 mm
• LF = 48 LQFP 7 mm x 7 mm
• LH = 64 LQFP 10 mm x 10 mm
• MP = 64 MAPBGA 5 mm x 5 mm
• LK = 80 LQFP 12 mm x 12 mm
• LL = 100 LQFP 14 mm x 14 mm
• MC = 121 MAPBGA 8 mm x 8 mm
• DC = 121 XFBGA 8 mm x 8 mm x mm
• LQ = 144 LQFP 20 mm x 20 mm
• MD = 144 MAPBGA 13 mm x 13 mm
• 5 = 50 MHz
• 7 = 72 MHz
• 10 = 100 MHz
• 12 = 120 MHz
• 15 = 150 MHz
• 16 = 168 MHz
• 18 = 180 MHz
• R = Tape and reel
• Blank = Trays

Example This is an example part number MK24FN256VDC12

Terminology and guidelines

Definition Operating requirement An operating requirement is a specified value or range of values for a technical characteristic that you must guarantee during operation to avoid incorrect operation and possibly decreasing the useful life of the chip.

Example This is an example of an operating requirement:
64 Freescale Semiconductor, Inc.

Symbol VDD

Min.

V core supply
voltage

Max.

Pinout

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived MK24FN256VDC12 Datasheet file may be downloaded here without warranties.

Datasheet ID: MK24FN256VDC12 635520