63811-0300

63811-0300 Datasheet

Specification Sheet Order No. 63811-0300

Part	Datasheet
63811-0300	63811-0300 (pdf)

PDF Datasheet Preview
Hand Crimp Tool for 1.25mm Pitch Crimp Terminals HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No. 63811-0300 Ratchet with safety release that ensures consistent performance Small handle spread which make this style tool ideally suited for end users A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position SCOPE Products 1.25mm Pitch PicoBlade Crimp Terminal, 28-32 AWG and 1.25mm Pitch Board-In Crimp Terminal, 28-32 AWG. Terminal Terminal Order No. Wire Size Insulation Diameter Strip Length Series No. Loose Piece Reel 50079 50079-8100 50079-8153 50079-8000 50079-5053 39-00-0413 39-00-0414 26-28 50080-8100 50080-8000 26-28 50125-8100 50125-8000 26-28 Customer to cut off terminal from reel 0.15mm maximum Cut-off Tab. DEFINITION OF TERMS BRUSH BELL MOUTH CONDUCTOR CRIMP INSULATION CRIMP SEAM BEND UP ROLLING STRIP LENGTH CUT-OFF TAB TWISTING BEND DOWN CRIMP HEIGHT The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope. Doc No ATS-638110300 Release Date 12-10-03 UNCONTROLLED COPY Page 1 of 5 Hand Crimp Tool for 1.25mm Pitch Crimp Terminals INSULATION CRIMP FORM This crimp terminal is designed for miniaturization therefore, each dimension of insulation crimp portion appears small as compared to the terminal material thickness. In order to avoid insulation piercing the crimp forms by the insulation barrel, coining is provided inside of the insulation barrel. For this reason, various crimp forms will occur at the tip of the insulation crimp barrel shown in the figure below. These crimp forms maybe changed completely by a small change in the wire, insulation punch, or terminal. These crimp forms are satisfactory for original function of the insulation crimp portion and it is confirmed that all of these forms below are acceptable insulation crimps.

PDF Datasheet Preview

Hand Crimp Tool for 1.25mm Pitch Crimp Terminals

HAND CRIMP TOOL Operating Instruction and

Specification Sheet Order No. 63811-0300

Ratchet with safety release that ensures consistent performance Small handle spread which make this style tool ideally suited for end users A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position

SCOPE

Products 1.25mm Pitch PicoBlade Crimp Terminal, 28-32 AWG and 1.25mm Pitch Board-In Crimp Terminal, 28-32 AWG.

Terminal

Terminal Order No.

Wire Size Insulation Diameter Strip Length

Series No. Loose Piece

Reel
50079
50079-8100 50079-8153
50079-8000 50079-5053
39-00-0413 39-00-0414
26-28
50080-8100 50080-8000
26-28
50125-8100 50125-8000
26-28

Customer to cut off terminal from reel 0.15mm maximum Cut-off Tab.

DEFINITION OF TERMS

BRUSH

BELL MOUTH

CONDUCTOR CRIMP

INSULATION CRIMP

SEAM

BEND UP ROLLING

STRIP LENGTH

CUT-OFF TAB

TWISTING BEND DOWN

CRIMP HEIGHT

The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope.

Doc No ATS-638110300 Release Date 12-10-03

UNCONTROLLED COPY

Page 1 of 5

Hand Crimp Tool for 1.25mm Pitch Crimp Terminals

INSULATION CRIMP FORM

This crimp terminal is designed for miniaturization therefore, each dimension of insulation crimp portion appears small as compared to the terminal material thickness. In order to avoid insulation piercing the crimp forms by the insulation barrel, coining is provided inside of the insulation barrel. For this reason, various crimp forms will occur at the tip of the insulation crimp barrel shown in the figure below.

These crimp forms maybe changed completely by a small change in the wire, insulation punch, or terminal.

These crimp forms are satisfactory for original function of the insulation crimp portion and it is confirmed that all of these forms below are acceptable insulation crimps.

Notice: we do not provide any warranties that information, datasheets, application notes, circuit diagrams, or software stored on this website are up-to-date or error free. The archived 63811-0300 Datasheet file may be downloaded here without warranties.

Datasheet ID: 63811-0300 649664